• Journal of dental hygiene science
• /
• v.23 no.3
• /
• pp.193-198
• /
• 2023

Background: The nose is located at the center of the face, and it is possible to determine race, sex, and the like. Research using the nasal index (NI) classification method to classify the shape of the nose is currently in progress. However, domestic research is required as most research is being conducted abroad. In this study, we used a 3D program to confirm the ratio of the nose shape of Koreans. Methods: One hundred patients (50 males and 50 females) in their 20s were evaluated (IRB approval no. DKUDH IRB 2020-01-007). Cone beam computed tomography was performed using the Mimics ver.22 (Materialise Co., Leuven, Belgium) 3D program to model the patient's skull and soft tissues into three views: coronal, sagittal, and frontal. To confirm the ratio of measurement metrics, analysis was performed using the SPSS ver. 23.0 (IBM Co., Armonk, NY, USA) program. Results: Ten leptorrhine (long and narrow) type, 76 mesorrhine (moderate shape) type, and 14 platyrrhine (broad and short) type noses were observed. In addition, as a result of sex comparison, five males had the leptorrhine (long and narrow) type, 40 mesorrhine (moderate shape), and five platyrrhine (broad and short) types. For females, five patients had the leptorrhine (long and narrow) type, 36 patients had the mesorrhine (moderate shape) type, and nine patients had the platyrrhine (broad and short) type. Conclusion: This study will be helpful when performing nose-related surgeries and procedures in clinical practice and for similar studies in the future.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.11
• /
• pp.52-62
• /
• 1995

We developed a two-dimensional numerical simulator which can analyze the electrical as well as optical characteristics and evaluate the detection performances of self-signal processing infrared detectors. It solves the poisson equation and the electron, hole current continuity equations including the optical generation and recombination models. To speed up convergency rate. the Newton algorithm is used. Automatic triangular grid generator make it easy to simulate the devices with the various read-out geometries. This simulator can show the variation of spatial resolution which is caused by the transit velocity and transit time dispersion in bifurcate and horn geometries respectively. Also, we calculated the responsivity, noise, and detectivity in respect of the applied electric field and background field-of-view. The results obtained from simulation correspond to those of experiments, and it is verified that horn read-out geometry has the superior spatial resolution and detection performance to bifurcate geometry.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.507-512
• /
• 2006

There are many risks in constructing tunnel-structure. To prevent these risks from occurring and secure safety, the precise and rapid survey of inside displacement of the tunnel is required. But nowadays the measurement of the crown settlement, convergency, and surface settlement depends on general kinds of method which use total station or level. In the way to provide data about maintaining structure according to recent improvement and progress of measuring technology, 3D laser scanning is used. It solves the problem of reliability in measuring displacement of existing structure, provides material that enables to estimate shape change of structure visually, and makes it possible to deliberate speedy countermeasure. By this three dimensioning it is possible to make efficient use of structure maintenance and field measurement

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1822-1825
• /
• 2003

A practical range estimator based on the robust Kalman filter is proposed to solve the range estimation problem for surface to air missile(SAM) homing guidance. Apart from the previous works based on the extended Kalman filter(EKF) with bearing only measurement, the proposed scheme makes use of line-of-sight(LOS) rate to ensure the fast convergency at long-range. In this reason, the robust Kalman filter is considered to deal with LOS rate measurement error. The recursive linear structure of proposed filter is easy to implement and make it possible to reduce computational burdens. Moreover, it shows good estimation performance without specific guidance law such as oscillation proportional navigation guidance(OPNG).

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.510-515
• /
• 2004

A proton exchange membrane fuel cells(PEMFC) operate at low temperature, allowing for faster startups and immediate response to change in the demand for power, and also deliver high power density. To maximize economical efficiency in PEMPC, it is necessary to the optimization. Response surface method(RSM) has non-gradient and fast convergency characteristics. Sampling points are extracted by design of experiments using Central Composite Method. In this paper, it is shown that the optimization is required for the design study of the PEMFC.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.6
• /
• pp.390-395
• /
• 1987

There is a variety not only of research topics but also of research techniques in electric power problems. It is well known that a significant increase in the rate of convergence can be obtained for the Gauss-Seidel method using the bus admittance matrix by applying acceleration factors determined empirically. The acceleration factor is calculated theoretically by using the bus voltage sensitivity (buses voltage interact each other) in this paper. It is observed that the proposed method using calculated acceleration factor gives better results than those of the method using calculated acceleration factor gives better results than those of the method using empirical one.

• Journal of Korean Society of Transportation
• /
• v.13 no.1
• /
• pp.95-110
• /
• 1995

n this research neural -based model was developed to forecast link travel times , And it is also compared wiht other time series forecasting models such as Box-Jenkins model, Kalman filter model. These models are validated to evaluate the accuracy of models with real time series data gathered by the license plate method. Neural network's convergency and generalization were investigated by modifying learning rate, momentum term and the number of hidden layer units. Through this experiment, the optimum configuration of the nerual network architecture was determined. Optimumlearining rate, momentum term and the number of hidden layer units hsow 0.3, 0.5, 13 respectively. It may be applied to DRGS(dynamic route guidance system) with a minor modification. The methods are suggested at the condlusion of this paper, And there is no doubt that this neural -based model can be applied to many other itme series forecating problem such as populationforecasting vehicel volume forecasting et .

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.10a
• /
• pp.183-190
• /
• 2001

Topology optimization. has been evolved into a very efficient conceptual design tool and has been utilized into design engineering processes in many industrial parts. In recent years, topology optimization has become the focus of structural optimization design and has been researched and widely applied both in academy and industry. Traditional topology optimization has been using homogenization method and optimality criteria method. Homogenization method provides relationship equation between structure which includes many holes and stiffness matrix in FEM. Optimality criteria method is used to update design variables while maintaining that volume fraction is uniform. Traditional topology optimization has advantage of good convergence but has disadvantage of too much convergency time and additive checkerboard prevention algorithm is needed. In one way to solve this problem, element remove method is presented. Then, it is applied to many examples. From the results, it is verified that the time of convergence is very improved and optimal designed results is obtained very similar to the results of traditional topology using 8 nodes per element.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.117-119
• /
• 1993

This paper presents a new method for solving unit commitment problem including hydro and pumped storage hydro units in a large scale power system. The proposed method makes it possible to get variable power of hydro and pumped storage hydro units and results in the better unit commitment with good convergency. Moreover this paper proposes an unit commitment algorithm to consider variable power of these units effectively by Lagrangian Relaxation method. By applying the proposed method to the test system, it is verified the usefulness of this method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.125-130
• /
• 2014

In recent years, the IT conversions have rapidly developed along the development of the information technologies and devices. The overuse of IT devices caused by this trend has weakened the physical condition of children these days, compared to the past, therefore a study for this problem is necessary. This study intends to improve the health of children, easy to lack physical activities caused by the addiction to PC and smart phones, by proposing a health care application for them using Kinect. This application will introduce some simple aerobic/anaerobic exercises that could be done in home and will help children to forget the boredom by exercising alone and to coach them by using it.