• Title/Summary/Keyword: ISC

Search Result 163, Processing Time 0.026 seconds

Flicker-Free Spatial-PSK Modulation for Vehicular Image-Sensor Systems Based on Neural Networks (신경망 기반 차량 이미지센서 시스템을 위한 플리커 프리 공간-PSK 변조 기법)

  • Nguyen, Trang;Hong, Chang Hyun;Islam, Amirul;Le, Nam Tuan;Jang, Yeong Min
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.41 no.8
    • /
    • pp.843-850
    • /
    • 2016
  • This paper introduces a novel modulation scheme for vehicular communication in taking advantage of existing LED lights available on a car. Our proposed 2-Phase Shift Keying (2-PSK) is a spatial modulation approach in which a pair of LED light sources in a car (either rear LEDs or front LEDs) is used as a transmitter. A typical camera (i.e. low frame rate at no greater than 30fps) that either a global shutter camera or a rolling shutter camera can be used as a receiver. The modulation scheme is a part of our Image Sensor Communication proposal submitted to IEEE 802.15.7r1 (TG7r1) recently. Also, a neural network approach is applied to improve the performance of LEDs detection and decoding under the noisy situation. Later, some analysis and experiment results are presented to indicate the performance of our system

A Study on the Implovement of Voltage Regulator and Electronic Control Unit for Vehicle (차량용 전자제어장치와 전압조정기 개선에 관한 연구)

  • Kim, Sun-Ho;Kim, Hyo-Sang
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.7 no.11
    • /
    • pp.912-917
    • /
    • 2001
  • In this study, we define the measuring method of crank angle precisely using an event and perform a study on the hardware structure and software algorithms which is applicable for the commercial engine. Also we developed a Computer-ECU(Personal computer based electronic control unit) using a computer and a microprocessor, for performing the ignition at a desire position(angle) and for controlling a duty ratio a pulse for ISC(Idle speed control). We applied these algorithms to the modeling which is induced a concept of event and got a better result than a conventional ECU in the state of transient as a result of performing air fuel ratio control in a commercial engine. This technique can be used for the back to improve ECU performance. It the present type of Hybrid I. C voltage regulator is altered to the new type of regulator, we will be surely able to reduce the production cost as well as simplify the design of alternator\`s rear bracket and rectifier part because of the removal of trio diode. Experiment is taken by MS-R004.

  • PDF

Series Resistance Change by Partial Shading in a-Si Thin Film Photovoltaic(PV) Module (부분 음영에 따른 a-Si Thin Film Photovoltaic(PV) Module의 직렬저항변화)

  • Shin, Jun-Oh;Jung, Tae-Hee;Kim, Tae-Bum;Woo, Sung-Chul;Yun, Na-Ri;Kang, Ki-Hwan;Han, Deuk-Young;Ahn, Hyung-Keun
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.23 no.11
    • /
    • pp.901-905
    • /
    • 2010
  • PV module has many power loss factors, and series resistance is the most important elements of them. It is therefore easy to expect the partial shading decrease the lifetime of the semiconductor depletion layer in thin film PV module. Different shading losses could be related with the hot spot which is critical in expecting the reliability issue. In this paper we have modelled the series resistance of the PV module with both different direction of the cell line and shading area of the panel. From the results, thin film a-Si PV module has shown different properties by shading direction.

A Study of the Housing Characteristics and Apartment Choice as a Social Class (사회계층에 따른 주거특성 및 아파트 선택에 관한 연구)

  • Ha, Jeung-Soon
    • Korean Journal of Human Ecology
    • /
    • v.16 no.2
    • /
    • pp.443-454
    • /
    • 2007
  • Survey questionnaires were conducted on housewives under 60 who had bought an apartment in Daegu. The data used in this study is collected Dalseo-Gu, Soosung-Gu and Buk-Gu by means of cluster sampling and from those chosen samples I use convenience sampling. The data were analyzed by SPSS WIN 10.0 program. The purpose of this study is to examine housing characteristics and apartment choice as a social class closely in order to improve value of apartment and to provide housing plan of apartment supply which is distinguished by a social class and moreover, to achieve efficient marketing strategy according to a recent recognition that housing is a kind of commodities. Objective and subjective measure of value are used to classify a social class. Objective measure of value includes scale apartment, a form of possession, a price of apartment, an occupation of husband, family income and academic background and subjective measure of value includes the standard of living out of people's own head. These measure of value are classified by giving consequence to each item with reference to ISC (index of status characteristics) of Wanner. There is a difference of housing characteristics and apartment choice as a social class as a consequence of this study. Therefore, this study suggests repeatedly that it should need not standardized housing supply but apartment supply of diverse demand desire because there is a difference of housing characteristics and apartment choice as a social class.

The Effects of PV Cell's Electrical Characteristics for PV Module Application (태양전지의 전기적인 출력특성이 태양전지모듈에 미치는 영향)

  • Kim, Seung-Tae;Kang, Gi-Hwan;Park, Chi-Hog;Ahn, Hyung-Keun;Yu, Gwon-Jong;Han, Deuk-Young
    • 한국태양에너지학회:학술대회논문집
    • /
    • 2008.11a
    • /
    • pp.36-41
    • /
    • 2008
  • In this paper, we study The Effects of PV Cell's Electrical Characteristics for PV Module Application. Photovoltaic module consists of serially connected solar cell which has low open circuit voltage and high short circuit current characteristics. The whole current flow of PV module is restricted by lowest current of one solar cell. For the experiment, we make PV module composing the solar cells that have short circuit current difference of 0%, 1%, 3% and Random. The PV module exposed about 35days, its the maximum power drop ratio was 4.282% minimum and 6.657% maximum. And PV module of low current characteristics has electrical stress from other modules. The solar cell temperature of PV module was higher compared to PV cell. To prevent early degradation, it is need to have attention to PV cell selection.

  • PDF

Output characteristics of different type of si pv modules based on working condition (결정질 실리콘 태양전지 모듈의 종류에 따른 동작 조건별 특성 비교에 관한 연구)

  • Park, Chi-Hong;Kang, Gi-Hwan;Ahn, Hyung-Keun;Yu, Gwon-Jong;Han, Deuk-Young
    • 한국태양에너지학회:학술대회논문집
    • /
    • 2008.04a
    • /
    • pp.252-256
    • /
    • 2008
  • Photovoltaic (PV) modules output changes noticeable with variations in temperature and irradiance. In general it is has been shown that a $1^{\circ}C$ increase in temperature results in a 0.5% drop in output. In this paper, seven PV module types are analyzed for variation in temperature and irradiance, and the resulting output characteristics examined. The 7 modules types utilized are as follows; 3 poly crystalline modules, 2 single crystalline modules, 1 back contact single crystalline module and 1 HIT module. 3 groups of experiments are then conducted on the modules; tests with varying irradiance values, tests with module temperature varying under $25^{\circ}C$ and tests with module temperature varying over $25^{\circ}C$. The experiments results show that as temperature rises the follow is observed; Pmax decreases by 0.6%, Voc decreases by about 0.4%, and Isc increasing by between 0.03%${\sim}$0.08%. In addition, an irradiance decrease of 100 w/m2 translates into a 10% drop in Pmax.

  • PDF

The Electrical Characteristics of Shading Effect in Photovoltaic Module (PV모듈에서 그림자에 의한 전기적 특성)

  • Kim, Seung-Tae;Kang, Gi-Hwan;Park, Ji-Hong;Ahn, Hyung-Keun;Yu, Gwon-Jong;Han, Deuk-Young
    • 한국태양에너지학회:학술대회논문집
    • /
    • 2008.04a
    • /
    • pp.257-262
    • /
    • 2008
  • In this paper, we study the electric characteristics of shading effects in photovoltaic module in case of outdoor operation. When fabricating PV module, solar cells are connected serially to obtain the high voltage because of its low open circuit voltage. And total current is determined by lowest current among solar cells. When the shading happens on PV module's surface, the current of shaded solar cell determine the total current flow. Because of this, generally by-pass diode is installed on junction box. The bypass diode operate when revered and shaded solar cell's voltage is over 0.6 voltage. The reverse-biased solar cell gives reduced maximum power of PV module and might give negative effect on durability. So, adequate by-pass installation and selection is needed.

  • PDF

Changes in Optical Properties of Crystalline-Si PV Modules after Natural Light Exposure (자연광 노출 후 결정질 실리콘 PV모듈의 광학적 특성 변화)

  • Kong, Ji-Hyun;Ji, Yang-Guen;Kang, Gi-Hwan;Yu, Gwon-Jong;Ahn, Hyung-Keun;Han, Deuk-Young
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2010.06a
    • /
    • pp.64-64
    • /
    • 2010
  • This paper presents the results of changes of optical properties of front materials in crystalline PV modules. If PV modules on the outdoor, transmittance of front materials is reduced by solar light. That is UV, IR included Solar spectrum will have change the properties of glass. Therefore decrease in transmittance leads to loss of the PV modules output. All the PV modules showed the loss in Isc by 1~5% within few hors. To investigate the changes we are analyzed using spectrophotometer from raw glass to laminated glass.

  • PDF

An Experimental Study on the Performance and Emission Characteristics of SI Engine Using New Type of Throttle Body (스로틀 바디가 가솔린 엔진의 출력 및 배기배출물 특성에 미치는 영향에 관한 실험적 연구)

  • Cho, Seung-Wan;Lee, Sang-Suk;Jin, Dong-Kyu;Shim, Jae-Joon;Kim, Gyu-Bo;Jeon, Chung-Hwan;Chang, Young-June
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.32 no.11
    • /
    • pp.884-890
    • /
    • 2008
  • Many researches have been carried out to reduce the emission levels and lower the fuel consumption in SI engines. Recently electronically controlled injection system is widely adapted to a passenger car to achieve these goals. Throttle body is also an important factor which influences on the emissions and engine power. In this study we redesigned a throttle body and conducted an experimental study to see the effects on engine performance and emission characteristics. We could find that idle speed control(ISC) showed stable operation characteristics as the cooling water temperature varied. And CO and HC emissions also satisfied the regulation limit.

Analysis for the changes of the mathematics cognitive domain and for the international achievement in TIMSS (TIMSS 인지영역 평가틀의 변화와 우리나라 학생들의 국제적 수학 성취도)

  • Kim, Sun-Hee
    • Journal for History of Mathematics
    • /
    • v.21 no.3
    • /
    • pp.157-182
    • /
    • 2008
  • TIMSS 2003 is the third and most recently round of IEA's Trends in International Mathematics and Science Study. In this study, I considered the changes of the mathematics cognitive domain in TIMSS and got some facts for developing assessment framework. And I analyzed 7 countries' achievement in the view of our country Korea, i.e. Singapore, Hongkong, Chinese Taipei, Japan, Netherlands, and Unites States. With the reliable and valid achievement scales for cognitive domains given by ISC, students' achievement scales were analyzed according to country, percentile, and sex in each cognitive domain.

  • PDF