• Title/Summary/Keyword: IS-2000 1X CDMA

Search Result 41, Processing Time 0.023 seconds

Traffic Modeling and Performance Analysis of Mobile Multimedia Data Services (이동통신 멀티미디어 데이터서비스의 트래픽 특성 모델링 및 성능분석)

  • 정용주;백천현;김후곤;최택진;양원석;황흥석
    • Journal of the Korean Operations Research and Management Science Society
    • /
    • v.28 no.2
    • /
    • pp.139-155
    • /
    • 2003
  • The aim of this study is to identify the data traffic capacity of 3G mobile communication networks, especially of cdma2000-1X networks. Three-layered ON/OFF traffic model is used to describe the dynamics of data traffics and the process of data transmission such as packet scheduling. We construct a simulator fully incorporating packet handling process of cdma2000-lX data network as well as three-layered ON/OFF traffic model describing the behavior of source data traffics. To get influence of traffic parameters on performance measures, the extensive simulations were performed for several data sets which are obtained from real trace data or previous studies. The experimental results show that the engineered throughput satisfying QoS criteria is approximately 25% of total capacity. Finally, some proposals to improve the system capacity are followed.

Design of Multiband Octa-Phase LC VCO for SDR (SDR을 위한 다중밴드 Octa-Phase LC 전압제어 발진기 설계)

  • Lee, Sang-Ho;Han, Byung-Ki;Lee, Jae-Hyuk;Kim, Hyeong-Dong
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.44 no.7 s.361
    • /
    • pp.7-11
    • /
    • 2007
  • This paper presents a multiband octa-phase LC VCO for SDR receiver. Four identical LC VCOs are connected by using series coupling transistor to obtain the octa-phase signal and low phase noise characteristic. For a multiband application, a band tuning circuit that consists of a switch capacitor circuit and two MOS varactors is proposed. As the MOS switch is on/off state, the frequency range will be varied. In addition, two varactors make the VCO be immune to process variation of the oscillation frequency. The VCO is designed in 0.18-um CMOS technology, consumes 12mA current from 1.8V supply voltage and operates with a frequency band from 885MHz to 1.342GHz (41% tuning range). As driving sub-harmonic mixer, the proposed VCO covers 3 standards(CDMA 2000 1x, WCDMA, WiBro). The measured phase noise is -105dBc@100kHz, -115dBc@1MHz, -130dBc@10MHz for CDMA 2000 1x, WCDMA, WiBro respectively.

3G+ CDMA Wireless Network Technology Evolution: Application service QoS Performance Study (3G+ CDMA망에서의 기술 진화: 응용 서비스 QoS 성능 연구)

  • 김재현
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.41 no.10
    • /
    • pp.1-9
    • /
    • 2004
  • User-Perceived application-level performance is a key to the adoption and success of CDMA 2000. To predict this performance in advance, a detailed end-to-end simulation model of a CDMA network was built to include application traffic characteristics, network architecture, network element details, and protocol features. We assess the user application performance when a Radio Access Network (RAN) and a Core Network (CN) adopt different transport architectures such as ATM and If. For voice Performance, we found that the vocoder bypass scenario shows 8% performance improvement over the others. For data packet performance, we found that HTTP v.1.1 shows better performance than that of HTTP v.1.0 due to the pipelining and TCP persistent connection. We also found that If transport technology is better solution for higher FER environment since the IP packet overhead is smaller than that of ATM for web browsing data traffic, while it shows opposite effect to small size voice packet in RAN architecture. Though simulation results we showed that the 3G-lX EV system gives much better packet delay performance than 3G-lX RTT, the main conclusion is that end-to-end application-level performance is affected by various elements and layers of the network and thus it must be considered in all phases of the technology evolution process.

The Design of Mobile Medical Image Communication System based on CDMA 1X-EVDO for Emergency Care (CDMA2000 1X-EVDO망을 이용한 이동형 응급 의료영상 전송시스템의 설계)

  • Kang, Won-Suk;Yong, Kun-Ho;Jang, Bong-Mun;Namkoong, Wook;Jung, Hai-Jo;Yoo, Sun-Kook;Kim, Hee-Joung
    • Proceedings of the Korean Society of Medical Physics Conference
    • /
    • 2004.11a
    • /
    • pp.53-55
    • /
    • 2004
  • In emergency cases, such as the severe trauma involving the fracture of skull, spine, or cervical bone, from auto accident or a fall, and/or pneumothorax which can not be diagnosed exactly by the eye examination, it is necessary the radiological examination during transferring to the hospital for emergency care. The aim of this study was to design and evaluate the prototype of mobile medical image communication system based on CDMA 1X EVDO. The system consists of a laptop computer used as a transmit DICOM client, linked with cellular phone which support to the CDMA 1X EVDO communication service, and a receiving DICOM server installed in the hospital. The DR images were stored with DICOM format in the storage of transmit client. Those images were compressed into JPEG2000 format and transmitted from transmit client to the receiving server. All of those images were progressively transmitted to the receiving server and displayed on the server monitor. To evaluate the image quality, PSNR of compressed image was measured. Also, several field tests had been performed using commercial CDMA2000 1X-EVDO reverse link with the TCP/IP data segments. The test had been taken under several velocity of vehicle in seoul areas.

  • PDF

Performance Analysis of Smart Antenna Base Station Implemented for CDMA2000 1X (CDMA2000 1X용으로 구현된 스마트 안테나 기지국 시스템의 성능분석)

  • 김성도;이원철;최승원
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.28 no.9A
    • /
    • pp.694-701
    • /
    • 2003
  • In this paper, we present a hardware structure and new features of a smart antenna BTS (Base Transceiver Station) for CDMA2000 1X system. The proposed smart antenna BTS is a composite system consisting of many subsystems, i.e., array antenna element, frequency up/down converters, AD (Analog-to-Digital) and DA (Digital-to-Analog) converters, spreading/despreading units, convolutional encoder/Viterbi decoder, searcher, tracker, beamformer, calibration unit etc. Through the experimental tests, we found that the desired beam-pattern in both uplink and downlink communications is provided through the calibration procedure. Also it has been confirmed that the adaptive beamforming algorithm adopted to our smart antenna BTS is fast and accurate enough to support 4 fingers to each user. In our experiments, commercial mobile terminals operating PCS (Personal Communication System) band have been used. It has been confirmed that the smart antenna BTS tremendously improves the FER (Frame Error Rate) performance compared to the conventional 2-antenna diversity system.

Quasi-Complementary Turbo Codes (QCTC) for cdma2000 1xEV-DV

  • Kim, Min-Goo;Ha, Sang-Hyuk;Kim, Yong-Serk
    • Proceedings of the IEEK Conference
    • /
    • 2003.07a
    • /
    • pp.97-100
    • /
    • 2003
  • The quasi-complementary turbo codes (QCTC) proposed by Kim [1] is used for a fast hybrid ARQ scheme with incremental redundancy and adaptive modulation coding in the cdma2000 1xEV-DV [2]. The QCTC provides various code rates with good performance, a very simple encoder structure, and an inherent channel interleaving. It is shown that the QCTC is a unified scheme of channel coding and channel interleaving. In this paper, we introduce the properties of QCTC and various hybrid ARQ-QCTC schemes for the system.

  • PDF

A PN-code Acquisition method Using Array Antenna Systems for CDMA2000 1x (CDMA2000 1x용 배열 안테나 시스템에서 PN 동기 획득 방법)

  • Jo, Hee-Nam;Yun, Yu-Suk;Choi, Seung-Won
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.42 no.8 s.338
    • /
    • pp.33-40
    • /
    • 2005
  • This paper presents a structure of the searcher using a diversity in array antenna systems operating in the cdma2000 1x signal environments. The new technique exploits the fact that the In-phase and quadrature components of interferers can respectively be viewed as an independent gaussian noise at each antnna element in most practical cdma signal environments. The proposed PN acquisition scheme is a singles-dwell PN acquisition system consisting of two stages, that is, the searching stage and the verification stage. The searching stage independently correlates the receiver multiple signals with PN generator of each antenna element for obtaining the synchronous energy at the entire region. Then, the searching results of each antenna element are non-coherently combinind. The verification stage compares the searching energy with the optimal threshold, which is predesigned in the lock detector, and decides whether the acquisition is successful or fail. In this paper, we analyzed the effect of tile diversity order to determine the mean acquisition time. In general, it is known that the mean acquisition time significantly decrease as the number of antenna elements increases. But, as the diversity order goes up, the enhancement of the performance is saturated. Therefore, to decrease the mean acquisition time of the searcher, we must design the optimal array antenna systems by considering the operating SNR range of the receiver, the probability of detection $P_D$ and that of false alarm $P_{FA}$ . The Performance of the proposed PN acquisition scheme is analyzed in frequency selective Rayleigh fading channels. In this paper, the effect of the number of antenna elements on PN acquisition scheme is shown according to the probability of detection $P_D$ and that of false alarm $P_{FA}$.

Reverse link rate control for high-speed wireless systems based on traffic load prediction (고속 무선통신 시스템에서 트래픽 부하 예측에 의한 역방향 전송속도 제어)

  • Yeo, Woon-Young
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.45 no.11
    • /
    • pp.15-22
    • /
    • 2008
  • The cdma2000 1xEV-DO system controls the data rates of mobile terminals based on a binary overload indicator from the base station and a simple probabilistic model. However, this control scheme has difficulty in predicting the future behavior of mobile terminals due to a probabilistic uncertainty and has no reliable means of suppressing the traffic overload, which may result in performance degradation of CDMA systems that have interference-limited capacity. This Paper proposes a new traffic control scheme that controls the data rates of mobile terminals effectively by predicting the future traffic load and adjusting the forward-link control channel. The proposed scheme is analyzed by modeling it as a multi-dimensional Markov process and compared with conventional schemes. The numerical results show that the maximum cell throughput of the proposed scheme is much higher than those of the conventional schemes.

A Study on Improvement of a Performance by Preventing the Ping-pong Effect when IP Handover (IP Handover 시 Ping-pong효과 방지에 따른 성능개선방안 연구)

  • Kim, Tae-Wan;Cho, Il-Kwon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.34 no.8B
    • /
    • pp.760-767
    • /
    • 2009
  • While network evolution toward all IP based wired and wireless converged network is on the move, services are being progressed into converged and complex services from simply coupled services, and telecommunication operators are developing new technologies which enable users to move between heterogeneous networks without discontinuity of a current service. In this paper, we propose a IP handover mechanism which reduces ping-pong effect during IP handover between WLAN and CDMA2000 1x EV-DO Rev.A neworks. We present stability and enhanced latency of the proposed IP handover mechanism by experimentation. The mechanism was developed under the 3rd phase of BcN project.

Mobile Positioning Without GPS in CDMA2000 1X

  • Eun-Tae Won;Su-ki Paik
    • Journal of Internet Computing and Services
    • /
    • v.2 no.5
    • /
    • pp.49-58
    • /
    • 2001
  • Mobile positioning measurement is the most important technology for Location Based Services in the cellular networks. Generally, we are expecting to use GPS to guarantee high accuracy of the mobile position, A CDMA network-based technique for the Mobile Station position calculation needs to be implemented in the cdma2000 network whether the handsets have GPS or not, The most reliable methods of the network-based location technologies are based on the estimation of time of signal traveling between MS and B18 in a network whose coordinates are identified, Other signal parameters such as the power of the received signal and the signal arrival direction cannot be used as main data for a location system because adoption of only the signal parameters will not meet the FCC requirements, In practice, the estimates of the time of signal propagation between MS and BTS always have errors resulting from low-resolution power of measurements and multi path signal propagation, This paper describes the combined network-based location technology in the cdma2000 1× necessary to meet US FCC requirements. The issues of a calibration table and statistic processing based on the pilot strength as well as combined network-based location technologies(TOA/ TDOA) will help to achieve higher location accuracy than specified in the US FCC Rule.

  • PDF