• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.7
• /
• pp.762-770
• /
• 2005

Adsorption and biodegradation performance of chlorinated by-products such as trihalomethanes(THMs) and haloacetic acids(HAA5) on granular activated carbon were evaluated in this study. The coconut-based activated carbon was found more effective than others in adsorption of THMs due to larger pore volume of less than $20{\AA}$. The wood-based activated carbon was less effective than coconut- and coal-based activated carbon in adsorption nevertheless having larger pore volume and specific surface area than others. The maximum adsorption capacity(X/M) of coconut-based carbon for THMS was 1.1-1.5 times larger than coal based carbon and 14.1-31.4 times larger than wood based activated carbons. Activated carbon usage rate(CUR) of coconut-, coal- and wood-based activated carbons for chloroform were 9.4, 11.2 and 38 g/day respectively. In the evaluation of adsorption isotherm of THM species for coconut-, coal- and wood-based activated carbons, k value of chloroform was the lowest in the THM species, It menas that chloroform is difficult to remove by activated carbon adsorption. and BDCM, CDBM, bromoform are in the succeeding order of adsorption. In the evaluation of biodegradation rate, mean biodegradation rate was chloroform 7%, BDCM 5%, CDBM 4% and bromoform 3%, respectively THMs are difficult materials to be biodegraded. In the evaluation of characteristics of adsorption and biodegradation for HAA5 species, HAA5 species appear to be removed effectively by activated carbon. Most of the HAA5 are adsorbed at the beginning of operation periods and HAA5 except TCAA were almost biodegraded from bed volume of 2,000 and more than 90 percent of biodegradation of TCAA was started from bed volume around 4,000 and after that biodegradation rate was increased with increasing bed volume.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.3
• /
• pp.171-178
• /
• 2013

In this study, the sludge that occurs in the initial operation of coagulation system developed for the treatment of CSOs were returned to the flocculation reactor. The purposes of this study were to analyze the Characteristics of flocs that are generated through the recycling sludge and settling characteristics of sludge, and to evaluate the possibility that high concentrations of particulate matter in the initial inflow of CSOs could be used as an weighted coagulant additive. As a result, the concentration of treated CSOs pollutants at the beginning of the CSOs influent with a large amount of particulate matter over 20 ${\mu}m$ was low, after gradually increasing the concentrations of them. The flocs generated from the sludge return were similar in size compared to flocs generated through injection of micro sands, and settling velocity in case of return sludge injection was decreased from 55.1 cm/min to 21.5 cm/min. SVI value of the sludge accumulated at the bottom of the sedimentation tank was 72, and settled sludge volume decreased rapidly due to the consolidation of sludge to the time it takes to 10 minutes. these mean that sludge used for recycling has good settling characteristic. A condition of returned sludge which is 0.1% return of 0.3% extraction was formed in the balance of settlement and extraction. In this case, This condition was to be adequate to maintain the proper concentration such as 100~200 mg/L of TS and 50~100 mg/L of VS in the flocculation reactor. The usage of the return sludge containing particulate matters of CSOs as an weighted coagulant additive was able to secure a stable treated water quality despite the change of influent water quality dynamically. Furthermore, it can be expected to reduce the alum dosage along with the sludge production.

• Journal of The Korean Association For Science Education
• /
• v.35 no.1
• /
• pp.159-167
• /
• 2015

RI-Biomics is a promising radiation convergence technology that combines radiation with bio science as new growth power technology. Many developed countries are focusing active support and constant exertion to dominate the RI-Biomics market in advance. In order to achieve global leadership in the RI-Biomics field, we need more highly advanced technologies and professional manpower. In fact, we have less manpower compared to technology we currently hold. In this study, we established a basic infrastructure to train professional manpower in the RI-Biomics field by developing/operating optimum training program through expert interviews and survey. The developed program has four organized sections to understand overall procedure of RI-Biomics. To evaluate our training program, we performed test operations with eight students who have a major related to RI-Biomics for three weeks in KARA (Seoul) and KAERI (Jung-eup). In detail, radioisotope usage and safety management were conducted for one week as basic course, RI-Biomics application technology was conducted for two weeks as professional course. To verify performance results of training program, we conducted to journal research, daily reports, and survey on participants. The results show a high level of satisfaction with training programs and continuous intention of involvement in our program. We also need to develop an intensive course to train high-quality human resources and to operate training program continuously. This training program will be used as basic materials for the development of RI-Biomics curriculum for university. Hence, we will expect that our training program contributes in training a professional manpower and develop RI-Biomics technology.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.4
• /
• pp.371-383
• /
• 2012

Shaping the root canal system to maintain original canal curvature is essential to clinical success in endodontic treatment. Opposed to most root canals that are curved, endodontic instruments are made from straight metal blanks. They have a tendency of straightening the root canal during preparation and frequently result in procedural errors. A new treatment method to maintain original canal curvature during shaping has been introduced for preventing procedural errors. The aim of this study was to compare the ability of instruments to maintain original canal curvature of continuous rotary system and single file system. Thirty ISO 15, 0.02 taper, Endo Training Blocks(Dentsplay Maillefer) were used. Specimens were assigned to 1 of 3 groups for shaping: specimens in group 1 were shaped with ProFile #20/.06 at the WL. Specimens in group 2 were shaped with Mtwo #35/.04 at the WL. Specimens in group 3 were shaped with WaveOne Primary reciprocating files at the WL after the glide path was achieved with PathFile. Pre- and postinstrumentation digital images were superimposed and processed with Matlab r2010b(The MathWorks Inc, Natick, MA) software to analyze the curvature-radius ratio(CRr), representing canal curvature modification. Data for comparison on the ability of instruments to maintain original canal curvature depending on each Ni-Ti file were analyzed with 1-way ANOVA(P<.05). Data for comparison on the ability of instruments to maintain original canal curvature depending on each Ni-Ti file system were analyzed with independent t-test(P<.05). A statistically significant difference(P<0.05) was noted on each Ni-Ti file. ProFile and WaveOne instrumentations maintained the original canal curvature significantly better(P<0.05) than Mtwo file. There were no significant difference(P>0.05) between continuous rotary system and single file system. Under the conditions of this study, ProFile and WaveOne instruments maintained the original curvature significantly better than Mtwo file and were less modification of the canal curvature compared. There was no significant difference between continuous rotary system and single file system in shaping of simulated canals. As clinical practitioners, it may be advantages to use hybrid approach when root canal shapes depending on the design and usage of Ni-Ti files.

• 대한공업교육학회지
• /
• v.39 no.1
• /
• pp.23-46
• /
• 2014

The purpose of this study was to analyze the textbooks of career counseling which are written or translated in Korean so as to understand the usefulness and limitation on the usage of career counseling textbooks. Research questions are as follows: 1) what contents are included in textbooks of career counseling? 2) what are the differences of content rates among textbooks of career counseling? 10 textbooks of career counseling were analysed(6 textbooks: introduction to career counseling, 4 textbooks: focused on career counseling skills and techniques) based on the competency components for career counseling professionals presented by Yoo(2009). Results indicated that 1) 6 textbooks of introduction to career counseling have the most content of 'category1: theories and concepts related to career counseling'. In comparison, 4 textbooks focused on career counseling skills and techniques have the most content of 'category4: career counseling competency'. 2) Based on the unit of analysis chapter, the highest rates are 'category4: career counseling competency(33.33%)' and 'category1: theories and concepts related to career counseling(28.15%)'. 3) It is hard to find the contents related to the knowledge and skills of individual and group counseling(category 2), the competencies of network, problem solving, peer counselor feedback, administration, ethic(category 8,9,10,11,13), the growth and self-management as professionals(category 12,14).

• Journal of Chest Surgery
• /
• v.31 no.9
• /
• pp.867-872
• /
• 1998

Background: The fixed dose regimen with activated coagulation time(ACT) is the most commonly employed method for determining the required dosage of heparin and protamine during cardiopulmonary bypass(CPB). Material and Method: We performed a prospective study on a fixed dose regimen for analyzing adequate dosages of heparin and protamine, the incidence of heparin resistance and heparin-induced thrombocyt openia, factors affecting ACT during CPB, and changes of ACT during aprotinin usage. 300 units/kg of heparin were administered to patients, and ACTs were measured after 5 mins. ACTs were checked at 10 mins and 30 mins after the onset of CPB, and then at 30 min intervals thereafter. If the measured ACT was under 400 secs, we added 100 units/kg of heparin. The heparin was reversed with 1 mg of protamine for each 100 units administered. If the measured ACT was longer than 130 secs 30 mins after protamine administration or if there was definitive evidence of a coagulation defect, we administered a further 0.5 mg/kg of protamine. Result: We studied 80 patients(50 adults and 30 children) who underwent open heart surgery(OHS) at Seoul National University Hospital. Preoperative ACT was 114.3${\pm}$19.3 secs in adults, and 119.5${\pm}$18.2 secs in children. There were no differences in preoperative ACT due to age, body weight, body surface area, or sex. The preoperative ACT was not influenced by a positive past history of OHS. Ten adults(20%) and 3 pediatric patients(10%) needed additional doses of heparin to maintain the ACT above 400 secs. Additional protamine administration was needed in 9 adults(18%) and 10 children(33%). Heparin resistance was found in only two adults. Heparin-induced thrombocytopenia was detected in 2 adults and 1 child. During CPB, ACT was prolonged. 12 adult patients received a low dose of aprotinin and showed longer celite activated ACT compared to the control group.The kaolin activated ACT showed a lower tendency than the celite activated ACT in aprotinin users. Conclusion: In conclusion, fixed dose regimen of heparin and protamine can be used without significant problems, but the incidence of need of additional dosage remains unsatisfactory.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.4
• /
• pp.51-58
• /
• 2008

Purpose: This study was assessed to investigate adverse effect induced by overuse of disposable soft contact lenses (CL). Methods: Three disposable lenses (etafilcon A, hilabilcon A, and nelfilcon A) were applied to 19 normal subjects free from any eye diseases for either a single day or variable periods by when subjects complained any discomforts. On the first and last days, localizations of lens' center on corneal surface and blink rates were recorded at every case. Results: Among CL wearers, 10.5% and 47.4% of total subjects quit wearing on the second day and third day, respectively. The case of stopping disposable lens wear was continuously increased with extended hour of lens application. On fourth day, 70.2% of CL wearers reported severe discomforts such as redness, dryness, irritation, pain and blurred vision. When subjects stopped CL wear, decentration of lens from the center of cornea was observed when it compared to the case of single usage of disposable CL. Also about 80% of total subjects showed increased blink rate when CL were worn for more than 2 days. These changes in lens centration and blink rate were consistantly shown regardless of lens types. Conclusions: Blurred vision and acute/chronic discomforts could occur to CL wearers by decentration of lens and increased blink rate when CL were overused more than 2 days even the numbers of two parameters measured in this study were variable by each subject or lens types. Therefore, consideration of individual characteristics and lens types is critical to prevent adverse effects may induced by overusage of disposable lens.

• Journal of Animal Environmental Science
• /
• v.18 no.2
• /
• pp.111-122
• /
• 2012

Establishment of the LFQC (Liquid Fertilizer Quality Certification) system is very urgent issue for recycling livestock manure as renewable resources in Korea faced with environmental problem of manure application to land due to intensive livestock farming. In this study, we investigated relevant laws and regulations on livestock manure fertilizer, certifications of eco-friendly agricultural products, government policies on livestock manure management to establish reasonable direction of Korean LFQC (Liquid Fertilizer Quality Certification) system. As a result from this study, the liquid fertilizers in 'LFQC' system could be classified as three levels according to the usage patterns in field; 1st. Individual Farm Level (IFL), 2nd. Joint Farm Level (JFL), and 3rd. Commercial Level (CML). And finally, we found some characteristics in 'Main Level-Grading Factors' of liquid fertilizer such as fertilizing value, harmfulness, stability, uniformity, economic effect, storage potential, commercial value, functionality. Those items were considered to be the key factors for the establishment of 'LFQC' system. More research on 'Evaluation Standards' for concrete guideline and on the 'Main Level-Grading Factors' be needed to complete Korean LFQC system.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.4
• /
• pp.95-112
• /
• 2013

Jangchungdan Park is now perceived as a mere park at the foot of Namsan mountain, but originally it was created to commemorate soldiers of Korean Empire on a site which name was Namsoyeong(南小營) during Joseon Dynasty. During the period of Japanese colonial rule, it was transformed into a park due to the rapidly changing circumstances, so the components expressing the validity of the colonial rule were introduced into the park. This paper examines the time sequential changes of Jangchungdan Park during the period of Japanese colonial rule, and the conclusions can be summarized as given below. Firstly, the park originally was a space to commemorate the soldiers who fought for the Korean Empire. It was built on formerly restricted area at the foot of Namsan Mountain in 1900, and it was arranged putting the ceremonial shrine Dansa (壇祠) as a central building and the annexes in the surroundings of it. The memorial ceremonies were held regularly in spring and autumn until 1909. Secondly, it became a city park for citizens of Gyeongseong-bu(the name of Seoul under the Japanese colonial rule). The authorities of Gyeongseong-bu reorganized Jangchungdan as a park in 1919, prohibited the performance of memorial ceremonies, and the existing buildings except the ceremonial shrine Dansa began to be used as park management facilities. Resting areas and amenities were supplemented for the usage of people from various backgrounds, and the large scale planting of cherry trees made the park a famous place to enjoy cherry-blossoms and other flowers in spring. Thirdly, it was reconstructed as a space to honor the influential personalities of Japanese colonial system. In 1932, Bankmun temple (博文寺) to commemorate Ito Hirobumi was constructed at a location that made it possible for a number of people to overlook Jangchungdan area. During that time, the buildings of traditional Joseon architecture were removed and reconstructed to serve as annexes to Bankmun temple. Due to the strategy to make Jangchungdan park a tourist attraction, Bankmun temple was included into the Gyeongseong sightseeing course, since the wide panorama of Jangchungdan Park and the whole city of Gyeongseong was opening from the temple. Various different components were introduced into Jangchungdan Park due to the rapidly changing circumstances; therefore the nature of the park was either altered or reproduced. Hopefully, the park rearrangement works will be executed paying respects to the memories of the past hereafter.

• Korean Journal of Plant Resources
• /
• v.32 no.5
• /
• pp.519-542
• /
• 2019

Twenty soybean cultivars developed recently were assessed using 27 insertion and deletion (InDel) markers derived from dense variation blocks (dVBs) of soybean genome. The objective of this study is to identify the distinctness and genetic relationships among a total of 169 soybean accessions including new cultivars. The genetic homology between 149 accessions in the soybean barcode system and 20 new cultivars was 61.3% on average with the range from 25.9% to 96.3%, demonstrating the versatile application of these markers for cultivars identification. The phylogenic analysis revealed four subgroups related to their usage. The 80% of cultivars for vegetable and early maturity and the 65.9% of cultivars for bean sprouts were clustered in subgroup I-2 and II-2, respectively, indicating of the limited gene pools of their crossing parents in breeding. On the other hands, the cultivars for soy sauce and tofu with considerable gene flow by genome reshuffling were distributed evenly to several subgroups, I-1 (44.4%), I-2 (26.4%) and II-2 (23.6%). We believe that the 27 InDel markers specific to dVBs can be used not only for cultivar identification and genetic diversity, but also in breeding purposes such as introduction of genetic resources and selection of breeding lines with target traits.