Efrida BASRI;SAEFUDIN;Mahdi MUBAROK;Wayan DARMAWAN;Jamal BALFAS;Yelin ADALINA;Yusuf Sudo HADI
Journal of the Korean Wood Science and Technology
/
제51권6호
/
pp.542-554
/
2023
This study is a continuation of our previous work, which focused on the resistance of jabon wood to termites after impregnation with wood vinegar (WV) and animal-based adhesive (kak). This paper presents the physicomechanical properties of fast-growing jabon wood impregnated with kak at two concentrations (8% and 10%) in wood vinegar or water as a solvent with and without 4% borax. The physical properties of the impregnation solution, that is, viscosity, density, pH, and solid content, were evaluated according to SNI 06-4567-1998. Some physical parameters, such as weight percent gain (WPG), density, water uptake, anti-swelling efficiency (ASE), crystallinity, and mechanical properties, i.e., modulus of elasticity (MOE), modulus of rupture (MOR), and compression strength parallel to the grain (CS), of the impregnated wood were determined. Based on these results, wood impregnated using a mixture of kak in WV presented better physical (increased WPG, density, dimensional stability, and crystallinity) and mechanical (increased MOE/MOR and compression strength) properties than wood impregnated with a water solvent or untreated wood. The wood impregnated using WV and water solvent improved the physical and mechanical properties. The density of the wood increased by 44%-58% and 32%-47%, ASE radial-tangential increased by 38%-45%; 15%-28% after 24 h of water immersion, crystallinity increased by 59%-74%; 36%, MOE increased by 46%-57%; 28%-31%, MOR increased by 29%-34%; 14%-27%, and compression strength increased by 40%-76%; 38%-72% values to untreated wood.
As new technologies change a society, librarians need to understand and adapt to technology innovations. However, most innovations that librarians are supposed to adopt are government-driven or top-down changes; and there have been very few studies conducted to identify any patterns or consistencies in librarians' perceptions of innovation. This paper, therefore, has two research purposes. First, it introduces the Concern Based Adoption Model (CBAM) as one method to gain a deeper understanding of how librarians see such changes. Second, this study identifies school librarians' concerns regarding digital textbooks in South Korea applying the CBAM theory. The test signifies that school librarians present a typical non-user profile, and the pattern anticipates a potential resistance to digital textbooks. Also, it discovers the less experienced and innovator librarians had higher concerns across every stage. The findings underscore a need of various interventions. The CBAM theory suggests, in terms of intense Stage 0 and 1, it is required for school librarians to have events to gain information about digital textbook implementation. Regarding targeted interventions, since the biggest gaps occurs in Stage 4, Consequence and Stage 5, Collaboration, according to school librarians' experience and adoption style, new school librarians need stronger engagement with the community, which including associations, mentors or peer support, and collaborating with public libraries; innovator school librarians require opportunities to test and present their use of digital textbooks (Hall and Hord 1987).
As the next generation of smartphone and tablet computers, wearable devices are currently being developed and available in market in various forms. Smart clothing is a wearable device that holds the greatest potential for future development but low in market penetration. This study was designed to identify factors that influence adoption and diffusion of smart clothing. In-depth interviews with potential consumers who were knowledgeable about and interested in smart clothing were conducted. A semantic network analysis method was used. The results showed that consumers perceived smart clothing as a garment rather than as a type of wearable device and had a positive perception of smart apparel as more convenient and advanced than functional apparel. At the same time, however, consumers had a negative perception of smart clothing as unnecessary, ugly, and injurious to health. Consumers also worried that wearing smart apparel over long periods of time would negatively impact their health. Factors affecting resistance to smart apparel included low utility, perceived risk, and lack of aesthetic completeness. Usefulness and convenience were factors that affected the acceptance of smart clothing. The innovativeness of the product was more influential than consumer innovativeness in the process of adoption and diffusion of smart clothing.
Graphene nanoplatelet (GNP)-reinforced alumina ($Al_2O_3$) is a promising material for micro-partapplications, particularly micro-nozzle shapes, because of its excellent wearresistance. In this study, a $Al_2O_3$/GNPcomposite with 15 vol% graphene nanoplatelets (GNP) was highly densified and fabricated via spark plasma sintering for micro-electrical discharge drilling (Micro-ED drilling) and the wear resistance property of the composite is evaluated via the ball-on-disk method. In addition, the diameter and shape of the micro-electrodes machined by wire electrical discharge grinding (WEDG), block electrical discharge grinding (BEDG), and new linear block moving electrical discharge grinding (LBMEDG) methods are systematically compared and analyzed to observe the micro-hole machining in the micro-ED drilling of the $Al_2O_3$/15vol% GNP composite.
Gray leaf spot (GLS)은 Pyricufaria oryzae Cavara에 의해 발병하는 중요한 곰팡이병으로 최근 주요 잔디류 및 목초류에 해당하는 퍼레니얼 라이그래스 (Perennial ryegrass; Lolium perenne L.)에서 발생되는 것으로 보고되었다. 또한 이 곰팡이는 벼의 도열병을 일으키는데, 이는 기주 저항성에 의해 방제될 수 있지만 이 저항성의 지속기간에 문제가 있는 것으로 알려져 있다. 지금까지 퍼레니얼 라이그래스에서는 GLS 저항성에 관한 내용이 거의 보고되지 않았다. 그러나 이탈리안 라이그래스 x 퍼레니얼 라이그래스 mapping population에서 GLS 저항성에 관한 주요 양적형질 유전자좌 (QTL)가 연관군 (linkage group) 3과 6 상에서 각각 발견되었다. 이 두 가지 양적형질 유전자좌가 다음 세대에서도 여전히 나타나고, 이들이 다른 유전적 배경 하에서도 기능할 수 있다는 사실을 확인하기 위해 기존의 mapping population으로부터 나온 저항성 개체를 저항성을 갖고 있지 않은 다른 퍼레니얼 클론과 교잡시켜 새로운 mapping population을 만들었다. 이 새로운 mapping population에서 RAPD, RFLP 및 SSR 마커를 이용하여 QTL 분석을 실시하였다. 이 결과, 비록 연관군 6 상에서는 양적형질 유전자좌가 확인되지 않았지만 연관군 3 상의 양적형질 유전자좌는 새로운 mapping population에서도 여전히 나타나고 있음이 확인되었다. 또한 두 개의 새로운 양적형질 유전자좌가 저항성을 갖고 있지 않았던 부모개체에서도 발견되었다. 본 실험 결과는 라이그래스에 있어서 GLS 저항성의 유전적 구조를 이해하는데 도움을 줄 뿐만 아니라 퍼레니얼 라이그래스 육종 프로그램에 사용상 편의성을 제고시킬 것이다.
Statement of problem: Implant screw loosening has been remained problem in restorative practices. Surface treatment of screw plays a role of preventing screw from loosening in implant screw mechanism. Purpose : The purpose of this study was to investigate surface characteristics of TiN and ZrN film ion plated screw with titanium and gold alloy screw and to evaluate wear resistance, surface roughness, and film adhesion on screw surface using various instruments. Material and methods : GoldTite screws and titanium screws provided by 3i (Implant Innovation, USA) and TorqTite screws or titanium screws by Steri-Oss (Nobel Biocare, USA) and gold screws and titanium screws by AVANA (Osstem Implant, korea) were selected. Ion plating which is much superior to other surface modification techniques was carried out for gold screws and titanium screws using Ti and Zr coating materials with nitrogen gas. Ion nitrided surface of each abutment screw was observed with field emission scanning electron microscopy (FE-SEM, micro-diamond scratch tester, vickers hardness tester, and surface roughness tester. Results : 1) The surface of gold screw and GoldTite is more smooth than ones of other kinds of non coated screw. 2) The ZrN and TiN coated surface is the more smooth than ones of other kinds of screw. 3) The hardness of TiN and ZrN coated surface showed higher than that of non coated surface. 4) The TiN coated titanium screw and ZrN coated gold screw have a good wear resistance and adhesion on the surface. 5) The surface of ZrN coated screw showed low surface roughness compared with the surface of TiN coated screw. Conclusion : It is considered that the TiN and ZrN coated screw which would prevent a screw from loosening can be applicable to implant system and confirmed that TiN and ZrN film act as lubricant on surface of screw due to decrease of friction for recycled tightening and loosening.
Loke, Chi K.;Gunawardena, Yasoja K.R.;Aslani, Farhad;Uy, Brian
Steel and Composite Structures
/
제33권6호
/
pp.823-836
/
2019
Spiral welded tubes (SWTs) are fabricated by helically bending a steel plate and welding the resulting abutting edges. The cost-effectiveness of concrete-filled steel tube (CFST) columns can be enhanced by utilising such SWTs rather than the more conventional longitudinal seam welded tubes. Even though the steel-concrete interface bond strength of such concrete-filled spiral-welded steel tubes (CF-SWSTs) is an important consideration in relation to ensuring composite behaviour of such elements, especially at connections, it has not been investigated in detail to date. CF-SWSTs warrant separate consideration of their bond behaviour to CFSTs of other tube types due to the distinct weld seam geometry and fabrication induced surface imperfection patterns of SWTs. To address this research gap, axial push-out tests on forty CF-SWSTs were carried out where the effects of tube material, outside diameter (D), outside diameter to wall thickness (D/t), length of the steel-concrete interface (L) and concrete strength grade (f'c) were investigated. D, D/t and L/D values in the range 102-305 mm, 51-152.5 and 1.8-5.9 were considered while two nominal concrete grades, 20 MPa and 50 MPa, were used for the tests. The test results showed that the push-out bond strengths of CF-SWSTs of both mild-steel and stainless-steel were either similar to or greater than those of comparable CFSTs of other tube types. The bond strengths obtained experimentally for the tested CF-SWSTs, irrespective of the tube material type, were found to be well predicted by the guidelines contained in AISC-360.
정보화 사회로의 변화와 더불어 교육에서도 정보통신기술(ICT)의 활용을 보다 적극적으로 권장하고 있다. 이러한 ICT를 활용한 교육의 활성화를 위한 정부의 노력으로 현재 초,중등 학교의 교육 정보 인프라는 높은 수준으로 구축되었다. 이와 더불어 수업에 ICT의 보다 효과적인 효과적으로 하기 위한 방안에 대한 연구는 많이 있었으나 학교에서의 ICT활용을 촉진하는 요인들에 대한 연구는 상대적으로 부족했다. 그나마 이러한 연구들도 단순한 실태조사에 의한 문제점 지적과 개인의 제언들이 대부분이었으며 실질적으로 혁신의 확산과 수용이라는 이론적 배경에 근거한 분석과 제언은 거의 없었다. 이에 본 연구에서는 학교에서의 ICT활용 교육의 확산과 실행을 증진시키기 위한 방안을 제시하기 위해서 그동안의 ICT활용의 촉진과 방해 요인들에 관한 연구들을 살펴보고 그 연구들의 결과를 혁신의 확산과 수용이론과 촉진환경요인들과의 비교를 통해 분석하였다.
정보 통신 기술과 함께 급격하게 발전한 플랫폼은 그 혁신성에서 전통 산업과 많은 차이를 보여주고 있다. 기술 수용 모델을 기반으로 플랫폼의 수용을 촉진하거나, 혁신성에 저항하는 요인을 개별적으로 연구하던 선행 연구를 보완하기 위해, 본 연구는 듀얼 팩터 이론을 적용하여 촉진과 억제 요인이 소비자의 저항에 동시에 미치는 영향을 살펴보았다. 연구 대상으로 타 플랫폼과 차별적 특성을 보이는 온라인 중고 거래 플랫폼의 구매자를 선정했으며, 선행 연구를 기반으로 이들의 과거 구매 횟수가 플랫폼의 저항과 사용 의도의 관계에 미치는 조절 효과를 같이 살펴보았다. 연구 결과, 촉진 요인인 경제적 이익은 저항에 부(-)의 유의한 영향을 미쳤으나, 사회적 영향은 영향을 미치지 못했다. 억제 요인의 경우, 인지된 복잡성과 인지된 위험이 모두 저항에 정(+)의 유의한 영향을 미쳤다. 저항은 사용 의도에 부(-)의 유의한 영향을 미쳤으나, 사용자들의 구매 횟수가 늘어날수록 그 영향력은 정(+)의 방향으로 조절되었다. 마지막으로 저항은 선행요인(경제적 이익과 인지된 복잡성)과 사용 의도 사이에서 매개 효과를 가졌다.
Garcia, Harkaitz;Cuadrado, Jesus;Biezma, Maria V.;Calderon, Inigo
Structural Engineering and Mechanics
/
제78권1호
/
pp.67-75
/
2021
This work studies the behaviour of a steel portal frame selection under fire exposure, considering both span lengths and fire exposure times as variables. Such structures combine carbon steel (S275), fireproof micro-alloyed steel (FR), and coatings of intumescent paint with variable thicknesses, improving thereby the flame retardant behaviour of the steel structure. Thus, the main contribution of this study is the optimization of the portal frames by combining both steels, analysing the resulting costs influence on the final dimensions. Besides, the topological optimization of each steel component within the structure is also defined, in accordance with the following variables: weather conditions, span, paint thickness, and cost of steel. The results mainly confirmed that using both FR and S275 grades with intumescent painting is the Pareto optimum when considering performance, feasibility and costs of such portal frames widely used for industrial facilities.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.