• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.2
• /
• pp.166-179
• /
• 2008

Excessive concentration of stress which is occurred in occlusion around the implant in case of the implant supported fixed partial denture has been known to be the main cause of the crestal bone destruction. Therefore, it is essential to evaluate the stress analysis on supporting tissue to get higher success rates of implant. The purpose of this study was to evaluate the effects of stress distribution and deformation in 3 different types of three-unit fixed partial denture sup-ported by two implants, using a three dimensional finite element analysis in a three dimensional model of a whole mandible. A mechanical model of an edentulous mandible was generated from 3D scan, assuming two implants were placed in the left premolars area. According to the position of pontic, the experiments groups were divided into three types. Type I had a pontic in the middle position between two implants, type II in the anterior posi-tion, and type III in the posterior position. A 100-N axial load was applied to sites such as the central fossa of anterior and posterior implant abutment, central fossa of pontic, the connector of pontic or the connector between two implants, the mandibular boundary conditions were modeled considering the real geometry of its four-masticatory muscular supporting system. The results obtained from this study were as follows; 1. The mandible deformed in a way that the condyles converged medially in all types under muscular actions. In comparison with types, the deformations in the type II and type III were greater by 2-2.5 times than in the type I regardless of the loading location. 2. The values of von Mises stresses in cortical and cancellous bone were relatively stable in all types, but slightly increased as the loading position was changed more posteriorly. 3. In comparison with type I, the values of von Mises stress in the implant increased by 73% in Type II and by 77% in Type III when the load was applied anterior and posterior respectively, but when the load was applied to the middle, the values were similar in all types. 4. When the load was applied to the centric fossa of pontic, the values of von Mises stress were nearly $30{\sim}35%$ higher in the type III than type I or II in the cortical and cancellous bone. Also, in the implant, the values of von Mises stress of the type II or III were $160{\sim}170%$ higher than in the type I. 5. When the load was applied to the centric fossa of implant abutment, the values of von Mises stress in the cortical and cancellous bone were relatively $20{\sim}25%$ higher in the type III than in the other types, but in the implant they were 40-45% higher in the type I or II than in the type III. According to the results of this study, musculature modeling is important to the finite element analysis for stress distribution and deformation as the muscular action causes stress concentration. And the type I model is the most stable from a view of biomechanics. Type II is also a clinically accept-able design when the implant is stiff sufficiently and mandibular deformation is considered. Considering the high values of von Mises stress in the cortical bone, type III is not thought as an useful design.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.6
• /
• pp.69-80
• /
• 2015

This can be promoted collaboration environment for the system and the system is very important for competitiveness, it is equipped. If so, could work in collaboration with members of the organization to promote collaboration what factors? Organizational collaboration and cooperation of many people working, or worth pursuing common goals by sharing information and processes to improve labor productivity, defined as collaboration. Factors that promote collaboration are shared visions, the organization's principles and rules that reflect the visions, on-line system developments, and communication methods. First, it embodies the vision shared by the more sympathetic members are active and voluntary participation in the activities of the organization can be achieved. Second, the members are aware of all the rules and principles of a united whole is accepted and leads to good performance. In addition, the ability to share sensitive business activities for self-development and also lead to work to make this a regular activity to create a team that can collaborate to help the environment and the atmosphere. Third, a systematic construction of the online collaboration system is made efficient and rapid task. According to Student team and A corporation we knew that Cloud services and social media, low-cost, high-efficiency services could achieve. The introduction of the latest information technology changes, the members of the organization's systems and active participation can take advantage of continuing education must be made. Fourth, the company to inform people both inside and outside of the organization to communicate actively to change the image of the company activities, the creation of corporate performance is very important to figure. Reflects the latest trend to actively use social media to communicate the effort is needed. For development of systematic collaboration promoting model steps to meet the organizational role. First, the Chief Executive Officer to make a firm and clear vision of the organization members to propagate the faith, empathy gives a sense of belonging should be able to have. Second, middle managers, CEO's vision is to systematically propagate the organizers rules and principles to establish a system would create. Third, general operatives internalize the vision of the company stating that the role of outside companies must adhere. The purpose of this study was well done in collaboration organizations promoting factors for strategic alignment model based on the golden circle and collaboration to understand and reflect the latest trends in information technology tools to take advantage of smart work and business know how student teams through case analysis will derive the success factors. This is the foundation for future empirical studies are expected to be present.

• Archives of design research
• /
• v.11 no.1
• /
• pp.185-197
• /
• 1998

The domestic publishing market has heen ranked at No.7 in the word publishing market(stastics material in Cultu re and Gymnastics m inistrv )Es pe cia Ill'. publishing quantity of children'book is about to reacb No.3. Such a publishing condition i." showing that Korean publishing world has limit,llion of kind and genre despite of its quant.iative improvement On the ot.her hand. t',reign juvenile publi."hing has multi-publishing form, which is a simultaneous publishing with dolls, audio stuff, game programs and CD-ROM t.itles. Even the animation is considered as of the publication at the planning s tsge. However, when we take a look at domestic condition we come to know that Korean juvenile publishing has been occupied mostly by the studying book. Also, the cautious book selection by the well educated parents in l990's has brought up the change of juvenile publishing world. Such a presen t condition bears of juvenlie publi.,;hing world. Such a present condition bears problem, which is the checking 190 translat.ions among the published picture- books of the last ye ar children's book Nevertheless, there was a sucessful domestic planned creative picture book last year. That is "Puppy s shit", which was sold out 15 000 copies and be st se ller of children's book. Whe n we take a look at the commercial success of "Puppy s shit", it is possible that domestic work holds a position in the publishing market. "Puppy s shit" is the story about valuable nature with Korean styled illustration, which tells the prefemece of Korean book in do mestic pu blis hin f.i market. With the motto "Finding prospect of the Korean creative children's book", this paper was went throu gh. By searchinf.i for creative com ponent.s of picture-book planning such as theme, story, illustration, and edit design through the foreign picture-book "What 1 want. to know from the little mole is who made it on top of his head"-and domestic creative picture/book 'Puppy's shit", this study tried to tell a couple of things like followings publication of Korean creative picture book in t.he world. professional and more artistic inner fabric and originality(the relatio nship be tween stort and illu,tration), improvement of illustration through new formative language with well expressed con ten t, planning improvem ent of Korean creative pictive picture book including literary, artistic and educative component and finally examples of planning, artict and educative component and finally example, of planning the good book with a story and illu,;tration which can in the long run improve the value of life for the children.h can in the long run improve the value of life for the children.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.168-176
• /
• 2011

Purpose: This study aims at investigating the influence of various insertion torques on thermal changes of bone. A proper insertion torque is derived based on the thermal analysis with two different implant designs. Materials and methods: For implant materials, bovine scapula bone of 15 - 20 mm thickness was cut into 35 mm by 40 - 50 mm pieces. Of these, the pieces having 2 - 3 mm thickness cortical bone were used as samples. Then, the half of the sample was immersed in a bath of $36.5^{\circ}C$ and the other half was exposed to ambient temperature of $25^{\circ}C$, so that the inner and surface temperatures reached $36.5^{\circ}C$ and $28^{\circ}C$, respectively. Two types of implants ($4.5{\times}10\;mm$ Br${\aa}$nemark type, $4.8{\times}10\;mm$ Microthread type) were inserted into bovine scapula bone and the temperature was measured by a thermocouple at 0.2 mm from the measuring point. Finite element method (FEM) was used to analyze the thermal changes at contacting surface assuming that the sample is a cube of $4\;cm{\times}4\;cm{\times}2\;cm$ and a layer up to 2 mm from the top is cortical bone and below is a cancellous bone. Boundary conditions were set on the basis of the shape of cavity after implants. SolidWorks was used as a CAD program with the help of Abaqus 6.9-1. Results: In the in-vitro experiment, the Microhead type implant gives a higher maximum temperature than that of the Br${\aa}$nemark type, which is attributed to high frictional heat that is associated with the implant shape. In both types, an Eriksson threshold was observed at torques of 50 Ncm (Br${\aa}$nemark) and 35 Ncm (Microthread type), respectively. Based on these findings, the Microthread type implant is more affected by insertion torques. Conclusion: This study demonstrate that a proper choice of insertion torque is important when using a specific type of implant. In particular, for the Microthread type implant, possible bone damage may be expected as a result of frictional heat, which compensates for initial high success rate of fixation. Therefore, the insertion torque should be adjusted for each implant design. Furthermore, the operation skills should be carefully chosen for each implant type and insertion torque.

• Journal of Korea Technology Innovation Society
• /
• v.12 no.4
• /
• pp.788-818
• /
• 2009

Renewable energy refers to solar energy, biomass energy, hydrogen energy, wind power, fuel cell, coal liquefaction and vaporization, marine energy, waste energy, and liquidity fuel made out of byproduct of geothermal heat, hydrogen and coal; it excludes energy based on coal, oil, nuclear energy and natural gas. Developed countries have recognized the importance of these energies and thus have set the mid to long term plans to develop and commercialize the technology and supported them with drastic political and financial measures. Considering the growing recognition to the field, it is necessary to analysis up-to-now achievement of the government's related projects, in the standards of type of renewable energy, management of sectional goals, and its commercialization. Korean government is chiefly following suit the USA and British policies of developing and distributing renewable energy. However, unlike Japan which is in the lead role in solar rays industry, it still lacks in state-directed support, participation of enterprises and social recognition. The research regarding renewable energy has mainly examinedthe state of supply of each technology and suitability of specific region for applying the technology. The evaluation shows that the research has been focused on supply and demand of renewable as well as general energy and solution for the enhancement of supply capacity in certain area. However, in-depth study for commercialization and the increase of capacity in industry followed by development of the technology is still inadequate. 'Cost-benefit model for each energy source' is used in analysis of technology development of renewable energy and quantitative and macro economical effects of its commercialization in order to foresee following expand in related industries and increase in added value. First, Investment on the renewable energy technology development is in direct proportion both to the product and growth, but product shows slightly higher index under the same amount of R&D investment than growth. It indicates that advance in technology greatly influences the final product, the energy growth. Moreover, while R&D investment on renewable energy product as well as the government funds included in the investment have proportionate influence on the renewable energy growth, private investment in the total amount invested has reciprocal influence. This statistic shows that research and development is mainly driven by government funds rather than private investment. Finally, while R&D investment on renewable energy growth affects proportionately, government funds and private investment shows no direct relations, which indicates that the effects of research and development on renewable energy do not affect government funds or private investment. All of the results signify that although it is important to have government policy in technology development and commercialization, private investment and active participation of enterprises are the key to the success in the industry.

• Journal of Intelligence and Information Systems
• /
• v.16 no.3
• /
• pp.99-120
• /
• 2010

Due to the wide spread of customers' frequent access of non face-to-face services, there have been many attempts to improve customer satisfaction using huge amounts of data accumulated throughnon face-to-face channels. Usually, a call center is regarded to be one of the most representative non-faced channels. Therefore, it is important that a call center has enough agents to offer high level customer satisfaction. However, managing too many agents would increase the operational costs of a call center by increasing labor costs. Therefore, predicting and calculating the appropriate size of human resources of a call center is one of the most critical success factors of call center management. For this reason, most call centers are currently establishing a department of WFM(Work Force Management) to estimate the appropriate number of agents and to direct much effort to predict the volume of inbound calls. In real world applications, inbound call prediction is usually performed based on the intuition and experience of a domain expert. In other words, a domain expert usually predicts the volume of calls by calculating the average call of some periods and adjusting the average according tohis/her subjective estimation. However, this kind of approach has radical limitations in that the result of prediction might be strongly affected by the expert's personal experience and competence. It is often the case that a domain expert may predict inbound calls quite differently from anotherif the two experts have mutually different opinions on selecting influential variables and priorities among the variables. Moreover, it is almost impossible to logically clarify the process of expert's subjective prediction. Currently, to overcome the limitations of subjective call prediction, most call centers are adopting a WFMS(Workforce Management System) package in which expert's best practices are systemized. With WFMS, a user can predict the volume of calls by calculating the average call of each day of the week, excluding some eventful days. However, WFMS costs too much capital during the early stage of system establishment. Moreover, it is hard to reflect new information ontothe system when some factors affecting the amount of calls have been changed. In this paper, we attempt to devise a new model for predicting inbound calls that is not only based on theoretical background but also easily applicable to real world applications. Our model was mainly developed by the interactive decision tree technique, one of the most popular techniques in data mining. Therefore, we expect that our model can predict inbound calls automatically based on historical data, and it can utilize expert's domain knowledge during the process of tree construction. To analyze the accuracy of our model, we performed intensive experiments on a real case of one of the largest car insurance companies in Korea. In the case study, the prediction accuracy of the devised two models and traditional WFMS are analyzed with respect to the various error rates allowable. The experiments reveal that our data mining-based two models outperform WFMS in terms of predicting the amount of accident calls and fault calls in most experimental situations examined.

• (The) Research of the performance art and culture
• /
• no.36
• /
• pp.751-781
• /
• 2018

Task of circling the pagoda of Waljeongsa(Woljeongsa Tabdori) is the major intangible cultural heritage with representativeness and historical meaning as a Buddhism culture, one of the Buddhism folk plays, which was firstly played after the liberation. Woljeongsa Tabdori holds significant designation importance in terms of Buddhism folklore heritage with Korean unique tradition and identity of Gangwon-do province. Temples are demonstrating Tabdori nationwide but Woljeongsa Tabdori is the unique case that systematically inherits the culture based on the designation of being intangible cultural heritage. That is why it is needed to focus on the cultural and internal value of Woljeongsa Tabdori. Tabdori is the integrated symbol of Buddhism respect and worship to the Buddha and pagoda. It is hard to presume the originality of Woljeongsa Tabdori: given the history of Woljeonsa temple, it lies into Goguryeo traditional play and Bokhui(Pagoda circling folk play) in Silla era. It fits into the courtesy of Circumambulating Stupa considering Moon in Goguryo mural, background of Odaesan Hwaeom thought/tripitaka and essence of Octagonal 9-story stone pagoda. At the first stage of Tabdori, Buddhist musical instruments such as Buddhism temple bell, singing bowl, cloud-shaped gong and wooden-fish. However, later, Samhyeon Yukgak has been added and then, Boyeom and Bakpaljeongjinga were singing: it could be interpreted that it was a pure Buddhist ceremony but it has become to have traditional aspect and been spread to the public. The origin of Woljeongsa Tabdori is related to the explanation of Circumambulating Stupa that experiences the glory of the ending ceremony. When a temple has a rite, the Buddhists make an offering to the Buddha. At that time, Buddhist prayer, sermon and chant are followed. After the rite, the Buddhists are circling the pagoda with the monks while praying for Buddhist charity and making their own wishes. It prays not only going after death to Nirvana of the one but also national prosperity and the welfare of the people for peaceful reign. As the temple holds bigger rites, many Buddhists gather and the Tabdori was a success. The scene of circling the pagoda and making own wishes in line with the Buddhist sermon was solemn. The idea on changes and convergence of Woljeongsa Tabdori requires strategic inheritance to promote the transmission while maintaining the paragon and purpose of designating the cultural heritage and reviving its identity. Korean Tabdori was held in Buddha's birthday in April and the mid-autumn day. Tabdori is a memorial service type Buddhist ceremony that once the monk holds the Buddhist rosary, circles the pagoda and sings the great mind and charity of the Buddha, Buddhists follow the step, lighting the lantern, circling the pagoda and praying for the gentle and easy death. Transmission education of the successor, diversified approach of the expert's advice and discourse on the revival of the origin should be reinforced in phases.

• (The) Research of the performance art and culture
• /
• no.32
• /
• pp.651-700
• /
• 2016

The keyword of contemporary art in 21st is audience participation. London has emphasized the importance of audience participation since 2000. The National Theater of London is trying a new method, which is live performance to search new audiences. Also, they are trying to cross the boundaries between 'stage' and 'spectator'. This leads the other theaters to search new audiences and try new genre of performance. Therefore, they establish a new form of performance, which is that audience actively moves and find a new story in a theater. For example, "environmental theater" is the one. This theater escapes from the traditional stage, but it is based on "site-specific performance." Lots of new forms of theater have emerged. In this study, I focused on one of these new forms of theater, which is "Punchdrunk." "Punchdrunk" was founded by few students graduated from London University's Laban Center in 1999. They started at an empty stage in small school with only three audiences. 7 years after, it became one of major theaters in London. 10 years after, it showed their performances in the United state. Since then, their performances in New York have never been stopped. More strikingly, for last decades, this theater has been always full. In this study, I reasoned that the key of "Punchdrunk" success is audience participation. Therefore, I investigated the features of Punchdrunk theater and how they engage their audience in this performance. In this study, I focused on one of their performances, . Also, I categorized the audiences in three different ways: narrative visitor, walking visitor, and engaging visitor with mask. Three-part transition of Disney Theme Park from Louis Marin was applied to study "narrative visitor." For "walking visitor", Normadism from Gilles Deleuze was applied. For "engaging visitor with mask", Voyeurism was applied.

• Cross-Cultural Studies
• /
• v.44
• /
• pp.315-342
• /
• 2016

There exists a general misunderstanding of the Musical as being both a dramatic genre and a musical genre. This misunderstanding lies in the fact that music fills the role of the drama. In other words, there exist a series of narrative episodes that help the development of the drama and music generates the ambience that corresponds to each episode. In this case, music is subordinated to the drama and thus becomes secondary. However, this paper seeks to show that in the Musical, musical composition is so strongly linked to the development of the drama that it is through the musical development that the drama unfolds. This paper seeks to explore this view through one of the most successful musicals of our time, Les $Mis{\acute{e}}rables$. A musical adapted from a novel is not the retrenchment of a series of episodes from the original novel. The process of dramatizing the novel compels the musical creators to observe what to draw out as a dramatic action. The interesting points of a musical consist of how the musical creator has reflected his understanding of the fiction through the composition of the music. This is why this paper has created a table analyzing the forty musical compositions in Les $Mis{\acute{e}}rables$. This table is meant to visualize the musical motifs employed in this play in order to explain the relationship between the musical composition and the development of the drama. The theme of Les $Mis{\acute{e}}rables$ lies in the transformation of Jean Valjean. His change includes the process of transformation from a thief to finding Jesus and his denial of being a sinner to his confessions of sinning. This paper explores the transformation of the dramatic action of Jean Valjean, which is symbolized by such themes as Misery, Love and Name established in musical form. The dramatic conflict between Jean Valjean and Javert as well as between Jean Valjean and $Th{\acute{e}}nardier$ is also explored through the composition of music. The success of Les $Mis{\acute{e}}rables$ lies in its successful constitution of music that embodies the in depth interpretation of the original play.

• Journal of Ginseng Culture
• /
• v.4
• /
• pp.13-37
• /
• 2022

Even before recorded history, the Korean people took ginseng. Later, poetry passed down from China developed into a literary style in which intellectuals from the Silla, Goryeo, and Joseon Dynasties expressed their thoughts concisely. The aim of this paper is to find Korean poems related to ginseng and to look for their semantic network. To this end, "Korea Classical DB ", produced by the Institute for the Translation of Korean Classics, was searched to find ginseng poems. As the result of a search in November 2021, two poems from the Three Kingdoms Period, two poems from the Goryeo Dynasty, and 23 poems from the Joseon Dynasty were searched. An examination of these poems found that the first ginseng poem was "Goryeoinsamchan," which was sung by people in Goguryeo around the 6th century. Ginseng poetry during the Goryeo Dynasty is represented by Anchuk's poem. Anchuk sang about the harmful effects of ginseng tributes from a realistic point of view. Ginseng poetry in the Joseon Dynasty is represented by Seo Geo-jeong in the early period and Jeong Yakyong in the late period. Seo Geo-jeong's ginseng poem is a romantic poem that praises the mysterious pharmacological effects of ginseng. A poem called "Ginseng" by Yongjae Seonghyeon is also a romantic poem that praises the mysterious medicinal benefits of ginseng. As a scholar of Realist Confucianism, Dasan Jeong Yak-yong wrote very practical ginseng poems. Dasan left five ginseng poems, the largest number written by one poet. Dasan tried ginseng farming himself and emerged from the experience as a poet. The story of the failure and success of his ginseng farming was described in his poems. At that time, ginseng farming was widespread throughout the country due to the depletion of natural ginseng and the development of ginseng farming techniques after the reign of King Jeongjo. Since the early 19th century, ginseng farming had been prevalent on a large scale in the Gaeseong region, and small-scale farming had also been carried out in other regions. What is unusual is Kim Jin-soo's poem. At that time, in Tong Ren Tang, Beijing (the capital of the Qing Dynasty), ginseng from Joseon sold well under the "Songak Sansam" brand. Kim Jin-Soo wrote about this brand of ginseng in his poem. In 1900, Maecheon Hwanghyeon also created a ginseng poem, written in Chinese characters. Thus, the semantic network of Korean ginseng poems is identified as follows: 1) Ginseng poetry in the spirit of the people - Emerging gentry in the Goryeo Dynasty (Anchuk). 2) Romantic ginseng poetry - Government School in the early Joseon Dynasty (Seo Geo-jeong, Seonghyeon, etc.). 3) Practical ginseng poetry - Realist School in the late Joseon Dynasty (Jeong Yak-yong, Kim Jin-soo, Hwang Hyun, etc.). This semantic network was extracted while examining the development of Korean ginseng poems.