• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.314-316
• /
• 2005

이 논문에서는 아크 용접시 발생하는 IR신호와 UV호의 상호 관계를 알아보려고 레이저 용접진단에 사용되는 IR-UV 센서 모니터링 시스템을 적용하였다. 그 결과 IR신호 크기는 용접폭에 관련이 있고, 펄스 형태의 UV신호는 IR신호 증가율이 임계값을 넘으면 나타나는 것을 알 수 있다.

• 조명전기설비학회논문지
• /
• 제26권12호
• /
• pp.37-43
• /
• 2012

UV-IR diagnostic technology is being used for predictive maintenance of high voltage equipment together with IR-thermography and ultrasonic devices. In this paper, the UV-IR camera design, fabrication, and perform a simple test to be take advantage of the diagnostic equipment. UV-IR camera developed a $6.4^{\circ}{\times}4.8^{\circ}$ of the field of view as a conventional camera to diagnose a wide range of slightly enlarged, and power equipment to measure the distance between the camera and the distance meter has been attached. In a distance of 5m with the UV-IR it is possible to detect partial discharge with a PD level of 2.5 pC and a RIV(Radio Influence Voltage) level of $3.6dB{\mu}V$.

• 조명전기설비학회논문지
• /
• 제27권4호
• /
• pp.54-61
• /
• 2013

UV-IR camera is being used for predictive maintenance of high voltage equipment together with measurement of temperature on localized heat and corona discharge. This paper was suggested the judgement method that is the discharge count, UV image pattern and discharge matching rate to apply the UV-IR camera on power facility. The discharge count method is counted by UV image pixel value. the UV image pattern method is determined by the UV image shape using neural network algorithm method, separated by Sunflower, Jellyfish, Ameba. The UV discharge matching is compare the breakdown the UV image size and measuring UV image size according to distance.

• Journal of Welding and Joining
• /
• 제23권4호
• /
• pp.53-58
• /
• 2005

We designed a weld monitoring system with UV and IR sensors using a embedded DSP controller for implementing a distribution system; running stand alone and communication with outside by industrial standard protocols. Also this system provided a USB port in order to be acquiring data in PC. The user interface program in PC visualized the IR and W data in time, frequency and state space. A correlation of IR and UV signals showed closely related to weld quality. A rapid change of geometry can be found through a moving average filter. And the average value of IR signal at an interval represented a welding width and depth. Through these results, we proposed a monitoring algorithm for a integer type DSP.

• 인터넷정보학회논문지
• /
• 제14권2호
• /
• pp.45-51
• /
• 2013

본 논문에서는 자외선(UV, ultraviolet) 및 적외선(IR, infrared) 센서를 결합함으로서 불이 연소하면서 방출하는 빛의 파장을 활용한 영상신호를 검출하는 결합형 불꽃영상 검출시스템은 적외선 센서와 자외선 센서 기반의 신호처리 알고리즘 설계방안을 제안한다. 또한, 설계한 듀얼모드인 결합형 불꽃영상 검출시스템은 단독형 적외선 또는 자외선 센서 기반의 영상검출 알고리즘의 검출 성능결과를 비교한다.

• 한국안전학회지
• /
• 제16권1호
• /
• pp.1-8
• /
• 2001

All objects emit thermal radiation and this radiation is the basis of the techniques used to detect flames. The usual phenomena occurring in the initial stage of the fire are generally invisible products of a combustion and visible smoke. Liquid or gaseous materials do not undergo a smoldering stage so that fires develop very rapidly. Also, the heat generated by the initial flames is usually not sufficient to activate a heat detector. In this case the most effective criterion for automatic fire detection is the flame. According to the fire regulation of korea, the compulsory standard provided that a flame detector shall be installed in a place that the attachment height of detector is higher than 20 m, chemical plants, hangar, refinery, etc.. The results of the research and development are discriminated between a flame and other radiant emitters, developed a UV detector tube contains an inert gas which absorbs UV radiation, developed PZT pyroelectric element is based on the use of photovoltanic cell, developed IR band-pass filter that only allow a 4.3 $\mu\textrm{m}$ radiation wavelength to reach the sensors and developed UV-IR combination flame detector combined into a single detection device.

• 한국표면공학회지
• /
• 제56권4호
• /
• pp.233-242
• /
• 2023

In recent years, energy-management studies in buildings have proven useful for energy savings. Typically, during heating and cooling, the energy from a given building is lost through its windows. Generally, to block the entry of ultraviolet (UV) and infrared (IR) rays, thin films of deposited metals or metal oxides are used, and the blocking of UV and IR rays by these thin films depends on the materials deposited on them. Therefore, by controlling the thicknesses and densities of the thin films, improving the transmittance of visible light and the blocking of heat rays such as UV and IR may be possible. Such improvements can be realized not only by changing the two-dimensional thin films but also by altering the zero-dimensional (0-D) nanostructures deposited on the films. In this study, 0-D nanoparticles were synthesized using a sol -gel procedure. The synthesized nanoparticles were deposited as deep coatings on polymer and glass substrates. Through spectral analysis in the UV-visible (vis) region, thin-film layers of deposited zinc oxide nanoparticles blocked >95 % of UV rays. For high transmittance in the visible-light region and low transmittance in the IR and UV regions, hybrid multiple layers of silica nanoparticles, zinc oxide particles, and fluorine-doped tin oxide nanoparticles were formed on glass and polymer substrates. Spectrophotometry in the UV-vis-near-IR regions revealed that the substrates prevented heat loss well. The glass and polymer substrates achieved transmittance values of 80 % in the visible-light region, 50 % to 60 % in the IR region, and 90 % in the UV region.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.642-645
• /
• 2012

본 논문에서는 자외선 및 적외선 필터를 기반으로 불이 연소하면서 에너지를 빛과 열의 형태로 방출하는 산화 과정으로 여러 가지의 연소반응에 의해 표출 형태가 열, 전기, 연소가스, 복사 등으로 나타날 때, 이중 열복사로 빛이 방출되는 화염의 온도에 따라 각각 특성이 다른 파장을 활용한 적외선과 자외선(IR/UV) 필터를 활용한 불꽃영상 감지시스템 설계방안을 제안한다.

• 폴리머
• /
• 제38권1호
• /
• pp.49-53
• /
• 2014

새로운 단량체형의 자외선흡수제를 triethylamine에서 2,4-dihydroxybenzophenone과 N-4-chlorocarbonyl-phenylmaleimide의 반응을 통하여 합성하였다. 이 자외선흡수제를 폴리프로필렌에 용융반응에 의해 그래프팅하였다. Maleimide의 그래프팅 수율은 IR 분광 데이터를 이용하여 결정하였다. 용융반응의 최적조건을 구하기 위하여 반응온도 및 시간, 단량체의 농도의 변화에 대하여 그래프팅 수율을 구하였다. Weatherometer에서 IR 스펙트럼의 카보닐 지수를 이용하여 그래프트된 폴리프로필렌의 광산화 정도를 조사하였으며, 우수한 광산화 억제작용을 보였다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2000년도 춘계학술대회 논문집
• /
• pp.140-145
• /
• 2000