• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.9
• /
• pp.784-790
• /
• 2012

In this paper, we propose a upstream transmission method to extend coverage in visible light communication (VLC) systems. We extend transmission distance by using focused infrared(IR) light emitting diodes(LEDs). Since the focused light covers just limited area, it might have a difficulty in transmitting data if the transmitter and receiver are not properly aligned. To solve this problem, we arrange multiple IR-LEDs in different direction and select a single best performing IR-LED among multiple IR-LEDs. Also, the transmission performance is periodically checked and another IR-LED is reselected to support the required quality of service (QoS) and to minimize battery consumption required by a mobile terminal.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.375-377
• /
• 2011

The augmented reality is a technology which expresses the information hardly obtained in the real world by synthesizing virtual objects in the real world. This study uses IR LED marker to obtain the coordination of real world for registration of virtual objects. Since the IR LED marker is inserted in target object thus it has properties of invisible markers. To realize the augmented reality, the existence of marker can be observed in camera input image. Therefore, this paper provides a method to give the properties of perfect invisible marker by using inpainting technology when realizing IR LED marker.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.433-438
• /
• 2012

With technologies available now, there are only a few virtual objects that augmented reality content can create. So, wider application of it is limited. If people want to realize any augmented reality content, out of a vast amount of materials available as well as virtual objects, the number of virtual objects that markers can render should be made to go up along with the content. In a precedent study, IR LEDs markers render marker information following On-Off signals. The number of LEDs should be raised to render as much information as possible, subsequently leading to the problem of oversized markers. This problem can be solved by generating data signals through the blinking of LEDs. This research puts forward OOK Code algorithm that represents the mode of data transmission using the light of LEDs. The amount of information that can be rendered by a marker increases and the size of the marker gets smaller, which is a merit, when it receives data signals from light.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1463-1464
• /
• 2013

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.245-246
• /
• 2007

Recently, the problem of binarization in night surveillance image using IR-LED(InfraRed-LED) is an issue because the same object has different intensity in the image according to the distance between camera and the object. This paper introduces a new local thresholding technique based on the relative intensity of IR-LED that is acquired with the camera and installation informations.

• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.20-30
• /
• 2012

The biggest advantage of AR is that it allows unique experience in the real world through a virtual object. However, there is a limit in the marker techniques to do registration for the virtual object. Therefore, it is possible for a complication that only allows restrictive interaction to come up. This paper provides marker technique of the next generation which can supplement limitations of existing marker technique. Such marker is a combination of IR LED's, and is a convergence of LED VCL concepts of M2M. Environment where the user belongs to and their unique choice will be expressed into one context. Also, the context will be delivered to the system through OOK IR LED marker algorithm. Marker can be operated on the spot to change virtual objects according to the user's taste, registration can be done at the same time for several virtual objects, and control become possible.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.3
• /
• pp.265-272
• /
• 2009

In this paper, a simple optical method that uses an infrared(IR) cut filter is proposed to minimize variation of eye image by external infrared(IR) sources in a video based head mounted eye tracking system that is used in the field of sports. For this, the IR cut filter is attached to a head mount of the eye tracking system, and the camera with an IR LED is located between the IR cut filter and eye. In this structure, external IR is blocked by the IR cut filter, and the IR intensity on the eye can be controlled by the IR LED. Therefore, the illumination condition of the camera to capture the eye can be stable without being affected by external IR illuminations. To verify the proposed idea, variation of the eye image and intensity of the IR with/without the IR cut filter is measured under various illumination conditions. The measured data show that the IR cut filter method can block external IR effectively, and complex pupil detection algorithms can be replaced by a simple binarized method.

• Journal of Adhesion and Interface
• /
• v.13 no.1
• /
• pp.31-37
• /
• 2012

In this study, we investigated the curing properties of UV-LED curable color coating. Specially, the effects of UV-LED wavelength (365, 395, and 405 nm), inert gas, the concentration of photosensitizer, and dual curing on the curing behavior of UV-LED coating systems were studied. The photopolymerization behaviors and the unreacted acrylate groups at Film-air (FA) interface and Film-substrate (FS) interface were investigated by photo differential scanning calorimetry (Photo-DSC) and Fourier-transform infrared spectroscopy with attenuated total reflection (FT-IR/ATR), respectively. Photo-DSC results showed that the heat flow and the ultimate conversion for coating system cured by 405 nm UV-LED were higher than the corresponding values for coating systems cured by 395 and 365 nm UV-LED. FT-IR/ATR results showed that the UV-LED curing systems improved interior and through curing of the coating film, but significantly are affected by oxygen inhibition at FA-interface. The inert environment such as nitrogen purging and the dual curing improved the surface and interior curing of the coating films.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.10
• /
• pp.673-677
• /
• 2014

In this paper, thermal analysis of HDU (Heat Dissipation Unit) for infrared CCTV is performed by using SolidWorks Simulation (Thermal analysis) package, in order to change the part materials and HDU shape is optimized. Furthermore, HDU disperses the aggregated heat around the LED inside the housing. The junction temperature of infrared LED checked by HDU check was $65.83^{\circ}C$, $42.02^{\circ}C$, respectively. In addition, the Thermoelement by changing the shape of the HDU was possibly designed and equipped with. Comparison with simulation and prototype measurement results, without HDU model was $65.83^{\circ}C$, $61.99^{\circ}C$, respectively. In addition to with HDU model was $42.02^{\circ}C$, $39.01^{\circ}C$, respectively. Only HDU mounted into infrared CCTV is usable in the ordinary house or outdoors. Also HDU with thermal element, fan mounted into infrared CCTV is usable in a blast furnace workplace or high temperature workplace.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.1
• /
• pp.44-49
• /
• 2021

Recently, infrared (IR) and near-infrared (NIR) light-emitting diodes (LEDs) were widely used for home medical applications owing to its low output power and wide exposed area for curing. For deep penetration of the light under the skin, multiple LEDs with wavelengths of 700~10,000 nm were located on a flexible printed circuit board. When multiple wavelengths of LEDs were soldered on a circuit board, the lifetime of LED module highly depends on LEDs with a short lifetime. The mean time to failure (MTTF) was able to calculate with the experimental results under high temperature and the Arrhenius model. The results of this study could help companies to approve the warranty of LED modules and its product.