• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.126-133
• /
• 2017

This paper deals with the effects of welding, which is done to fix the stator stack, on a motor in case of fabricating a prototype motor that is manufactured in a small quantity. In the case of a small motor, the stator is designed and fabricated with the segmented core as a way to raise the fill factor of winding wire to the utmost within a limited size. In case of fabrication by welding both inside and outside of the stator in order to fix the segmented-core stator, the effects of stack are ignored, and the eddy current loss occurs. This paper performed the no-load test on an IPM-type BLDC motor for driving the suction fan of a vacuum cleaner, which was manufactured by using a segmented-core stator. As a result of the test, it was found that input power more than expected was supplied. To analyze the effects of welding by using the finite element analysis method and verify them experimentally, a stator was re-manufactured by bonding, and input power supplied during the no-load test was compared.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.4
• /
• pp.659-666
• /
• 2006

Servo-motors are used as key components of automated system by performing precise motion control as accurate positioning and accurate speed regulation in response to the commands from computers and sensors. Especially, the linear brushless servo-motors have numerous advantages over the rotary servo motors which have connection with the friction induced transfer mechanism such as ball screws, timing belts, rack/pinion. This paper proposes an estimation method of unknown motor system parameters using the informations from the sinusoidal driving type linear brushless DC motor dynamics and outputs. The estimated parameters can be used to tune the controller gain and a disturbance observer. In order to meet this purpose high performance Digital Signal Processor, TMS320F240, designed originally for implementation of a Field Oriented Control(FOC) technology is adopted as a controller of the liner BLDC servo motor. Having A/D converters, PWM generators, rich I/O port internally, this servo motor application specific DSP play an important role in servo motor controller. This linear BLDC servo motor system also contains IPM(Intelligent Power Module) driver and hail sensor type current sensor module, photocoupler module for isolation of gate signals and fault signals.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.232-234
• /
• 2017

In this research, the BLDC motor 2 axis controller was designed using a dual core processor. The controller used TMS320F28377D which is TI's latest dual-core DSP, and the BLDC motor was selected with the position of resolver having high reliavility and the speed sensor built-in type motor.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.893_894
• /
• 2009

This paper study on the notch effect for d-q axis inductance of interior type permanent magnet (IPM) motor. The variations of d-q axis inductance are analyzed by finite element method (FEM). Applying the notch for cogging torque minimization and maximization of reluctance torque is confirmed to be improve the torque characteristics. Also, speed characteristics is analyzed according to the load current

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.732-733
• /
• 2015

본 논문에서는 외전형 영구자석 동기전동기(Outer rotor Permanent Magnet Synchronous Motor)의 회전자 형상에 따른 토크특성을 비교하였다. 표면부착형 영구자석(SPM) 형태의 FAN용 PMSM을 설계하고 이 모델을 기준으로 동일한 외경사이즈를 갖지만 더 높은 토크 밀도를 갖는 4가지 매입형 영구자석(IPM) 형태의 PMSM을 제시한다. Finite Element Analysis(FEM)을 통하여 각 모델의 특성을 해석하고 자석 사용량과 토크를 비교 및 분석하였다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.938-939
• /
• 2015

3상 BLDC 전동기의 경우, PMSM보다 간단하며 제어가 상대적으로 용이하다는 장점을 갖는다. 본 논문에서는 기존의 IPM의 최대 토크 운전 방식에서 착안하여 기존의 SPM타입의 전동기 운전방식과는 달리 최대 토크 지점에 인가되는 유효전압을 상승시켜 토크의 활용률 및 효율 특성을 향상시키는 운전방식을 제안한다. 유한요소해석 및 시뮬레이션을 통해 제안된 운전방식의 타당성을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.274-276
• /
• 2009

This paper presents a rotor shape optimization of interior type permanent magnet (IPM) motor for cogging torque minimization and maximization of reluctance torque. In order to minimize the cogging torque, the optimal notches are put on the rotor pole face and the arc type pole face is applied. The variations of cogging torque and d-q axis inductions are analyzed by finite element method (FEM).

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.399-400
• /
• 2020

본 논문은 Sensored BLDC 모터의 제어방법을 설명하고, 효율적인 최적 제어를 하기위해 Lead Angle 제어를 하는 방법에 대하여 설명하였다. Lead Angle 값을 실시간 Auto Tuning 하는 기법을 설계 및 구현하였다. 실제 Microchip 사의 DSC를 사용하여 Software로 동작을 구현하였으며, PWM 스위칭 하기 위한 반도체 소자는 IGBT 모듈인 IPM을 사용하여 BLDC 모터의 구동회로인 인버터를 구성하였다. 실제 사용하는 400W급 BLDC 모터를 사용하여 Lead Angle 제어와 Auto Tuning 실험결과를 비교 검증하였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1661-1667
• /
• 2013

This paper studies the dynamic irreversible demagnetization characteristics of an interior permanent magnet (PM) brushless DC motor with a stator turn fault. A new algorithm, which is a finite element method (FEM) combined with a line voltage equation of the motor, is developed to analyze irreversible demagnetization under dynamic and transient states and considers a stator turn fault. The input current, circulating current, magnetic distribution characteristics, and operating property of the PM, including the irreversible demagnetization in the fault state, are analyzed using this algorithm by considering the magnetic saturation effect. The feasibility of the proposed method confirmed from the analysis results is verified via an experiment. Through this fault analysis, we can accurately check the fault phenomena of a PM motor against the demagnetization fault for fault prevention.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.6
• /
• pp.959-965
• /
• 2008

This paper presents a novel method for cogging torque reduction of interior type permanent magnet motor. For calculation position and width of notch, energy formulation and cogging torque function in air gap are analyzed by analytical method(space harmonics method) and numerical method. The optimal shape of notchs is decided by using finite element method. The validity of the proposed method is confirmed with experiments.