• Title/Summary/Keyword: INTERPHASE

Search Result 196, Processing Time 0.022 seconds

Development of a Large Scale STATCOM Using Double-Connected Multistep Inverter (이중접속방식의 멀티스텝 인버터를 이용한 대용량 STATCOM의 개발)

  • 김태훈;배영상;최세완;이왕하
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.9 no.1
    • /
    • pp.36-41
    • /
    • 2004
  • In this paper a large scale STATCOM using double-connected multi-step inverter is proposed and operating principle along with control method is detailed. A simple auxiliary circuit including an interphase transformer is employed to improve output voltage waveform of 12-step into 36-step. The proposed scheme could be a cost effective approach in high power applications such as 10MVar to 30MVar STATCOM. Experimental results from a 2KVA laboratory prototype show validity of the proposed method.

Optimum signal setting based on phase sequence and interval in an isolated intersection (교통신호의 페이스순서 및 페이스간격을 고려한 신호최적화)

  • 김경철;임강원
    • Journal of Korean Society of Transportation
    • /
    • v.14 no.2
    • /
    • pp.45-58
    • /
    • 1996
  • In a large signal intersection, it is the most important to set phase sequences and phase intervals of traffic signal in order to improve the efficiency of the capacity as well as safety. These setting allows to select the best sequence of signal phase among several alternatives, and thus to rearrange the starting and ending points of the individual phase using an effective interphase periods (EIP). The EIP is a gap between previous and current traffic movements at a potential collision point in an intersection. Each of traffic movements has an equality for safety and efficiency at the balanced condition of EIP. This paper presents how to set optimally the phase sequences and intervals of traffic signal in an intersection using phase based approach. And in the second part, we applied the theory developed in the first part. In particular, a numerical example of phase base signal setting is presented using a matrix computation method in order to select the best sequence among several alternatives, and thus to rearrange the starting and ending points of the individual phase using the EIP. This method also allows to apply to optimum signal setting even in five-lag or staggered-type intersection.

  • PDF

Dependence of Electrolyte Concentration on SEI of Lithium Metal (리튬금속 SEI의 전해질 농도의존성)

  • Choi, Hye-Kang;Jeong, Soon-Ki;Kim, Yang-Soo
    • Proceedings of the KAIS Fall Conference
    • /
    • 2011.05a
    • /
    • pp.158-160
    • /
    • 2011
  • 본 연구에서는 리튬 금속을 음극소재로 사용하기 위해 수지상 리튬의 성장을 억제하기 위한 지침을 얻기 위한 목적으로 TEM(Transmission Electron Microscope)과 임피던스를 주된 분석 수단으로 이용하여 2. 15 M LiBETI/ PC, 2.04 M $LiClO_4$/ PC 전해질은 1 M LiBETI/ PC, 1 M $LiClO_4$/ PC 전해질보다 얇고 치밀한 SEI(Solid Electrolyte Interphase) 구조를 가지고, 클로로포름에 의해 SEI의 유기물이 녹아 두께가 얇아 졌다. 임피던스를 측정한 결과 두꺼운 두께를 가진 SEI는 저항이 더 크고, 클로로포름 처리 후에는 저항이 커진 것을 확인할 수 있었다.

  • PDF

Atomic Force Microscopy Applications to the Next Generation Lithium-ion Batteries (차세대 리튬이온이차전지 연구에서의 원자력 현미경 활용)

  • Lee, Ji Hyun;Gong, Sang Hyuk;Kim, Hyeong Woo;Kim, Hyung-Seok
    • Ceramist
    • /
    • v.22 no.4
    • /
    • pp.381-392
    • /
    • 2019
  • Recently, demands for lithium-ion batteries (LIB) in various fields are increasing. In particular, understanding of the reaction mechanism occurring at the electrode-electrolyte surface/interface is significant for the development of advanced LIBs. Meanwhile, research and development of LIBs highly requires a new specific characterization approach. For example, atomic force microscopy (AFM) has been utilized to the LIB research field for various purposes such as investigation of topography, electrochemical reactions, ion transport phenomena, and measurement of surface potential at high resolution. Advances in the AFM analysis have made it possible to inspect various material properties such as surface friction and Young's modulus. Therefore, this technique is expected to be a powerful method in the LIB research field. Here, we review and discuss ways to apply AFM to LIB studies.

Effect of Tris(trimethylsilyl) Phosphate Additive on the Electrochemical Performance of Nickel-rich Cathode Materials at High Temperature

  • Jang, Seol Heui;Mun, Junyoung;Kang, Dong-Ku;Yim, Taeeun
    • Journal of Electrochemical Science and Technology
    • /
    • v.8 no.2
    • /
    • pp.162-168
    • /
    • 2017
  • $LiNi_xCo_yMn_zO_2$ cathode materials have been the focus of much attention because of their high specific capacity. However, because of the poor interfacial stability between cathodes and electrolytes, the cycling performance of these materials fades rapidly, especially at high temperatures. In the present paper, we propose the use of tris(trimethylsilyl) phosphate (TMSPO), which contains phosphate and silyl functional groups, as a functional additive in electrolytes. The addition of TMSPO resulted in the formation of cathode electrolyte interphase (CEI) layers on the surfaces of the cathodes and effectively suppressed electrolyte decomposition reactions, even at high temperatures. As a result, cells cycled with TMSPO exhibited remarkable capacity, which remained after 50 cycles (82.0%), compared to cells cycled without TMSPO (64.6%).

Evaluation and monitoring of degradation mechanism of Li-ion battery for portable electronic device (휴대전자기기용 저용량 리튬이온 배터리의 충방전 열화 기구 분석 및 모니터링)

  • Byeon, Jai Won
    • Journal of Applied Reliability
    • /
    • v.13 no.2
    • /
    • pp.129-140
    • /
    • 2013
  • As a fundamental experimental study for reliability improvement of lithium ion secondary battery, degradation mechanism was investigated by microscopic observation and acoustic emission monitoring. Microstructural observation of the decomposed battery after cycle test revealed mechanical and chemical damages such as interface delamination, microcrack of the electrodes, and solid electrolyte interphase (SEI). Acoustic emission (AE) signal was detected during charge and discharge of lithium ion battery to investigate relationships among cumulative count, discharge capacity, and microdamages. With increasing number of cycle, discharge capacity was decreased and AE cumulative count was observed to increase. Observed damages were attributed to sources of the detected AE signals.

Fine Structural Observations on Spermatogenesis of the Goldeye Rockfish, Sebastes thompsoni (Teleostei: Scorpaenidae)

  • LEE Jung Sick;OH Yung Keun;HUH Sung-Hoi
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.30 no.6
    • /
    • pp.1005-1012
    • /
    • 1997
  • Fine structural changes of the germ cells during spermatogenesis in the goldeye rockfish, Sebastes thompson; were examined by means of the transmission and scanning electron microscopy. A spermatogonium has a large nucleus with a single nucleolus in the interphase. Primary spermatocytes are characterized by the formation of chromatin clumps and presence of the synaptonemal complex in the nucleus. The nucleoplasm of secondary spermatocytes is more condensed than that of primary spermatocytes, and the cytoplasm contains numerous mitochondria, endoplasmic reticulum and Golgi complex. The nuclei of spermatids in metamorphosis show sickle-like shape as the nucleoplasm becomes more condensed. In the cytoplasm of spermatids, the proacrosomal granules are not found at all. A spermatozoon consists of head, neck and tail. The acrosome is absent in the head. Four to five cytoplasmic collars are observed in the posterior portion of the head of spermatozoon. The well developed axonemal lateral fins are observed in the flagellum of spermatozoon.

  • PDF

Equal Current Distribution in Parallel Resistive SFCL Using SIPT (SIPT를 이용한 병렬 저항형 한류기의 평형전류분배)

  • 심정욱;최용선;김혜림;현옥배
    • Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
    • /
    • 2003.10a
    • /
    • pp.109-112
    • /
    • 2003
  • Small impedances in the superconducting parallel circuits cause unequal distribution of the currents in the circuits. This results in quenches or losses in some superconducting parts and decrease of total transport current. This paper presents the fabrication and test results of a superconducting multi- interphase transformers (SIPT) for equal current distribution in superconducting parallel circuits. The secondary loop configuration with air core SIPT seems to be the most efficient one for the SFCL. Test results show that the SIPT can effectively make the current distribution uniform in Parallel circuits that have unequal resistances.

  • PDF

Separation and Recovery of Cyclodextrin Glucanotransferase Using Aqueous Two-Phase Systems (수성2상계를 이용한 Cyclodextrin Glucanotransferase 분리 및 회수)

  • 김진현;홍승서;이현수
    • KSBB Journal
    • /
    • v.15 no.6
    • /
    • pp.556-559
    • /
    • 2000
  • Cyclodextrin Glucanotransferase(EC 2.4.1.19 : 1,4-${\alpha}$-glucano) transferase, cyclizing; CGTase) can be separated and recovered in an aqueous two-phase system composed of poly(ethylene glycol)(PEG)/dextran and PEG/salt. In an aqueous two-phase system consisting of PEG 35000 (5%) and dextran T2000 (7%), all cell and debris were collected at the interphase. CGTase partitioned to the denser dextran phase at an yield of 83.4%. On the other hand, in an aqueous two-phase system consisting of PEG 35000 (10%) and sodium phosphate (15%), CGTase partitioned to the denser salt phase at an yield of 95.5%. In order to recover CGTase using an aqueous two-phase system, the PEG/salt system proved to be more efficient than the PEG/dextran system in terms of yield and cost.

  • PDF

연속식 고정층 탑내에서의 휘발성 유기 화합물[VOCs]의 흡착 특성에 관한 연구

  • 최인호;최호석;이현재;구본탁;김인호
    • KSBB Journal
    • /
    • v.15 no.6
    • /
    • pp.578-583
    • /
    • 2000
  • Biofiltration has been identified as a promising method of odor, VOCs and air toxic removal from waste gas streams because of low capital and operating cost, low energy requirements and an absence of residual products requiring further treatment of disposal. Because biofiltration units are microbial systems in-corporationg microorganisms grown on a porous solid media like compost, peat, soil and mixtures of these materials, there is a need to study of the adsorptive behavior of these supports. The purpose of this study was to investigate the major parameters of adsorptive process. We adsorbed VOCs onto peats and bark, and examined the correlations between the interphase mass transfer coefficients and transfer units, at different stream flow rates, VOCs inlet concentrations and bed lengths.

  • PDF