• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.437-441
• /
• 2003

In this paper, the 30 W power amplifier for an IMT-2000 repeater was developed a gain flatness and the third IMD (Intermodulation distortion) by microwave absorber. The absorption ability of the absorber is shown up to -10 dB and -4 dB at 3.6 GHz, 2.3 GHz band, respectively. The power amplifier without absorber has the gain over 57 dB, the gain flatness of $\pm$0.33 dB and the third IMD of 27 dBc at 33.3 W output. Otherwise, the power amplifier with absorber has the gain over 58 dB, the gain flatness of less than $\pm$0.9, the third IMD over 29 dBc at the same output power. As a result, the characteristic of the different type shows improvement of 1 dB in gain, 0.3 dB in gain flatness and 1.77 dBc in IMD.

• Journal of KIISE:Software and Applications
• /
• v.33 no.6
• /
• pp.580-587
• /
• 2006

As PDA, IMT-2000, and e-Book are developed and popular in these days, the number of users who use these products has been increasing. However, available memory size of these machines is still smaller than that of desktop PCs. In these products, TrueType fonts have been increased in demand because the number of users who want to use good quality fonts has increased, and TrueType fonts are of great use in Windows CE products. However, TrueType fonts take a large portion of available device memory, considering the small memory sizes of mobile devices. Therefore, it is required to reduce the size of TrueType fonts. In this paper, two-phase compression techniques are presented for the purpose of reducing the sire of hangul bitmap data embedded in TrueType fonts. In the first step, each character in bitmap is divided into initial consonant, medial vowel, and final consonant, respectively, then the character is recomposed into the composite bitmap. In the second phase, if any two consonants or vowels are determined to be the same, one of them is removed. The TrueType embedded bitmaps in Hangeul Wanseong (pre-composed) and Hangul Johab (pre-combined) are used in compression. By using our compression techniques, the compression rates of embedded bitmap data for TrueType fonts can be reduced around 35% in Wanseong font, and 7% in Johab font. Consequently, the compression rate of total TrueType Wanseong font is about 9.26%.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.12-24
• /
• 2001

The key advantage of LTCC(low temperature co-fired ceramics) technology is the ability to integrate passive components such as resistors, capacitors, and inductors. More compact circuits with an increased scale of integration are needed with the development for advanced telecommunication system such as IMT-2000. LTCC technology can be obtained by removing these elements from the substrate surface to inside of ceramic body. And it can miniaturize the wireless phone through integration of planar patch antenna, duplexer, band pass filter, bias line, circuit of impedance matching and RF choke etc. Futhermore, with the multilayer chip process and its outstanding electrical material characteristics, LTCC is predestined for highly-integrated, cost effective wide band applications. This paper focuses on the general description of LTCC MCM technologies and the fabrication of the multilayer VCO module.

• The KIPS Transactions:PartC
• /
• v.8C no.1
• /
• pp.105-112
• /
• 2001

In this paper, we present the advanced QCELP codebook search improving the qualification of speech, which can make QCELP vocoder used in noise robust system. While conventional QCELP usually searches stochastic codebook once, we can find that two times search is the most suitable for improving the quality of speech after we did 2-5 times search. Consequently, the advanced QCELP vocoder represents excitation signal in detail using two times precise quantization and so improve the qualification of speech. In our experiment, we use the speeches collected from circumstance (such as lecture room, house, street, laboratory etc.) without regarding noise as input dat and measure the speech Qualification using SNR, segSNR. As the result of the experiment, we find that the advanced QCELP makes SNR and segSNR improved by 38.35% and 65.51% respectively compared with conventional QCELP.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.5 no.1
• /
• pp.43-59
• /
• 2006

A compact and broadband $4\times1$ array antenna was developed for 3G smart antenna system testbed. The $4\times1$ uniform linear away antenna was designed to operate at 1.885 to 2.2GHz with a total bandwidth of 315MHz. The array elements were based on the novel broadband L-probe fed inverted hybrid E-H (LIEH) shaped microstrip patch, which offers 22% size reduction to the conventional rectangular microstrip patch antenna. For steering the antenna beam, a commercial variable attenuator (KAT1D04SA002), a variable phase shifter (KPH350SC00) with four units each, and the corporate 4-ways Wilkinson power divider which was fabricated in-house were integrated to form the beamforming feed network. The developed antenna has an impedance bandwidth of 17.32% $(VSWR\leq1.5)$, 21.78% $(VSWR\leq2)$ with respect to center frequency 2.02GHz and with an achievable gain of 11.9dBi. The design antenna offer a broadband, compact and mobile solution for a 3G smart antenna testbed to fully characterized the IMT-2000 radio specifications and system performances.

• Korean Management Science Review
• /
• v.25 no.2
• /
• pp.43-55
• /
• 2008

Contingent valuation method(hereafter CVM) is generally believed to be one of the most popular methods used for quantifying the value of non-market goods or services particularly by asking respondents of willingness to pay. This study deals with how to use CVM in calculating the value of mobile telephone service by suggesting methodology of estimation and eliminating biases. This study represents an attempt to estimate the WTP(Willingness To Pay) of the mobile telephone service using the face-to-face interview which is the qualitative technique is used. In this study, by using the single bound dichotomous choice model(SBDC) in order to analyze the valuation of mobile telephone service, WTP was estimated. Also we analyze the factors to pay for mobile service in which it becomes the important factor of demanding services. We used logit model. In order to provide robust estimates of WTP, we have used the Method of Montecarlo Simulation. Consequently, consumers showed that WTP about the mobile communications service is generally high. And it could know that the WTP will fell down as the specialized knowledge about the mobile communications frequency was high. It will be able to become the important part to not only the business carrier but also the policy maker to estimate the economic value of mobile telephone service.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.230-236
• /
• 2002

A study on architecture of new parallel interference canceller which can be applied for reverse link of next generation mobile communication system supporting multi-rate is performed on this paper. The proposed method adopts new algorithm which can be applied for multi-rate system to reduce multiple access interference (MAI) which cause performance degradation of CDMA system and limit of channel capacity. The proposed system is evaluated by simulation results under various conditions. As a result, performance enhancement is achieved compared to existing conventional interference cancellers. Although the amount of calculation is increased, we can find that the performance is improved generally.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.7 no.1
• /
• pp.41-58
• /
• 2007

A compact and broadband $4{\times}1$ array antenna was developed for 3G smart antenna system testbed. The $4{\times}1$ uniform linear array antenna was designed to operate at 1.885 to 2.2GHz with a total bandwidth of 315MHz. The array elements were based on the novel broadband L-probe fed inverted hybrid E-H (LIEH) shaped microstrip patch, which offers 22% size reduction to the conventional rectangular microstrip patch antenna. For steering the antenna beam, a commercial variable attenuator (KAT1D04SA002), a variable phase shifter (KPH350SC00) with four units each, and the corporate 4-ways Wilkinson power divider which was fabricated in-house were integrated to form the beamforming feed network. The developed antenna has an impedance bandwidth of 17.32% ($VSWR{\leq}1.5$), 21.78% ($VSWR{\leq}2$) with respect to center frequency 2.02GHz and with an achievable gain of 11.9dBi. The design antenna offer a broadband, compact and mobile solution for a 3G smart antenna testbed to fully characterized the IMT-2000 radio specifications and system performances.

• Journal of information and communication convergence engineering
• /
• v.1 no.4
• /
• pp.183-188
• /
• 2003

The $4^{th}$ generation mobile communications, through several radio access networks such as WLAN, Bluetooth, UMTS, GPRS, CDMA 1X, and IMT-2000 in the same area offering different type of coverage, will support interactive multimedia services in additions to wider bandwidths, higher bit rates, and service portability. Regardless of various radio access networks, they will also support robust security mechanisms, as well as seamless mobility and common authentication. In this paper, we give an overview of WLAN security and examine its security problems. We also explain the enhanced security schemes, such as port-based authentication, EAP, and IEEE 802.1X. For secure wireless communications, several possible security solutions are offered and evaluated in various respects to improve WLAN security. This paper will make a contribution to provide more secure wireless communications to cellular operators embracing WLAN technology as a means to generate new revenues based on data services.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1312-1315
• /
• 2002

This research describes the design of a fully integrated fractional-N frequency synthesizer intended for the local oscillator in IMT-2000 system using 0.18-$\mu\textrm{m}$ CMOS technology and 1.8-V single power supply. The designed fractional-N synthesizer contains following components. Modified charge pump uses active cascode transistors to achieve the high output impedance. A multi-modulus prescaler has modified ECL-like D flip-flop with additional diode-connected transistors for short transient time and high frequency operation. And phase-frequency detector, integrated passive loop filter, LC-tuned VCO having a tuning range from 1.584 to 2.4 ㎓ at 1.8-V power supply, and higher-order sigma-delta modulator are contained. Finally, designed frequency synthesizer provides 5 ㎒ channel spacing with -122.6 dBc/Hz at 1 ㎒ in the WCDMA band and total output power is 28 mW.