• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.924-931
• /
• 2002

In this paper, a new λ/4 bias transmission line that is added dumbbell-shaped defected ground structure(DGS) on ground plane of the conventional λ/4 bias transmission line is proposed. This DGS λ/4 bias transmission line maintains high characteristic impedance, but physical width is wider and length is shorter than that of the conventional bias line. If the proposed bias line is attached on signal transmission line, this bias line can reduces the $3^{rd}$ harmonic signal as well as the$2^{nd}$ harmonic signal. With harmonic reduction characteristics, efficiency and linearity of amplifier are improved. The proposed bias line is adopted in power amplifier on IMT-2000 base-station transmitting band. This paper presents several simulations and experimental results of DGS to show validity of the proposed power amplifier using the new λ/4 bias transmission line. Experimental results represent that the $3^{rd}$ harmonic signal is reduced about 26.5 dB and efficiency is improved about 9.1 % and IMD3 is improved 4.5 dB than the conventional structure.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.1 s.92
• /
• pp.66-77
• /
• 2005

This paper proposed a novel broadband PIFA(Planar Inverted-F Antenna) for IMT-2000/WLAN/DMB terminal. Two branch lines for meander line were utilized in order to improve the characteristics of PIFA which usually has a narrow band. The shorting strip between the ground plane and meander-type radiation elements were used in order to minimize the size of the antenna. The -10 dB return loss bandwidth of a realized antenna was $38.2{\%}$(1.84~2.71 GHz), which contains the broadband bandwidth with triple band. And the simulated and measured values of 1 g and 10 g averaged peak SAR on human head caused by the triple band PIFA mounted on folder-type handsets were analyzed and discussed. As a result, the measured 1 g and 10 g averaged peak SARs of PIFA were similar with the simulated values and were lower than the 1.6 W/kg and 2 W/kg of 1 g and 10 g averaged peak SAR limits.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.1
• /
• pp.41-48
• /
• 2003

In this paper, a new equivalent circuit for a defected ground structure(DGS) is proposed and adapted to design of a power amplifier for performance improvement. The DGS equivalent circuit presented in this paper consists of parallel LC resonator and parallel capacitance to describe the fringing fields due to the etched defects on the metallic ground plane, and also is used to optimize the matching circuit of a power amplifier. A previous research has also used a DGS for harmonic rejection and efficiency improvement of a power amplifier(1), however, there was no exact equivalent circuit analysis. In this paper, we suggest a novel design method and show the performance improvement of a class AB power amplifier by using the equivalent circuit of a DGS applied to output matching circuit. The design method presented in this paper can provide very accurate design results to satisfy the optimum load condition and the desirable harmonic rejection, simultaneously. As a design example, we have designed a 20W power amplifier with and without circuit simulation of DGS, and compared the measurement results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.288-300
• /
• 2002

In this paper, a novel method of equalization of RF transceivers is suggested for MIMO(Multiple Input Multiple Output) antenna actively studied for high speed data transmission in the recent IMT-2000 system. The core of suggestion is in equalizing the transfer characteristics of multiple transceivers using feedback and memory during the predefined calibration time. This makes it possible to weight the signals in the intermediate frequency, which is easier in the application of recently developed DoA(Direction of Arrival) algorithms. In addition, the time varying optimum cell formation according to traffic is feasible by antenna beam-forming based on the DoA information. The suggested method of equalizing multiple transceivers are successfully verified using envelope simulation. two outputs. This paper is concerned with the diagnosis of multiple crosstalk-faults in OSM. As the network size becomes larger in these days, the convent.
nal diagnosis methods based on tests and simulation be.
me inefficient, or even more impractical. We propose a simple and easily implementable alg？ithm for detection and isolation of the multiple crosstalk-faults in OSM. Specifically, we develop an algorithm for isolation of the source fault in switc.
ng elements whenever the multiple crosstalk-faults are.
etected in OSM. The proposed algorithm is illustrated by an example of 16$\times$16 OSM.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.839-846
• /
• 2007

In this paper, the first attempt to design a novel structure of dual-band feedforward linear power amplifier(FFW LPA) was presented. Up to now, primary technical difficulty has been the extension of the conventional signal canceller to the dual-band operation. Therefore, we propose the design technique of the dual-band equal group delayed carrier canceller, the dual-band equal group delayed intermodulation distortion(IMD) canceller and the dual-band FFW LPA. The operation frequency bands of the implemented dual-band FFW LPA are digital cellular($f_0=880$ MHz) and IMT-2000($f_0=2.14$ GHz) band, which are separated about 1.26 GHz. With the high power amplifier of 120 W PEP for commercial base-station application, IMD cancellation loop shows 20.45 dB and 25.04 dB loop suppression at each band of operation for 100 MHz. From the adjacent channel leakage ratio(ACLR) measurement with CDMA IS-95A 4FA and WCDMA 4FA signal, we obtained 16.52 dB improvement at the average output power of 41.5 dBm for digital cellular band, and 18.59 dB improvement at the average output power of 40 dBm for IMT-2000 band simultaneously.

• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.299-313
• /
• 2002

Recently, the demand for mobile communications and multimedia services has rapidly increased so that conventional cellular system cannot fulfill the requirement of users (capacity and QoS) any more. Therefore, the hierarchical cellular system has been suggested in order to guarantee the QoS and to admit large population of users. IMT-2000 adopts the hierarchical cellular structure, which requires a call control algorithm capable of manipulating and utilizing the complicated structure of hierarchical cellular structure with handiness and efficiency. In this thesis, as an improvement of conventional combined algorithm, a new call control algorithm considering the moving speed of terminal and bandwidth is suggested. This algorithm employs buffers and guard channels to reduce the failure rate. Also, this algorithm considers the moving speed of terminal and bandwidth to elevate the efficiency. Furthermore, calls are handled separately according to the moving speeds of terminal and bandwidths to improve the QoS and reduce the handover rate. As an evaluation of the suggested algorithm, a model hierarchical cellular system is constructed and simulations are conducted with various types of traffic. As the result of the simulations, such indices as block rate, drop rate, channel utilization, and the number of inter layer handovers are examined to demonstrate the excellency fo the suggested algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1A
• /
• pp.26-34
• /
• 2002

Mobile telecommunication systems such as IS-95 and IMT-2000 employ frame based communication using frames up to 20 msec in length and the receiving end has to store the whole frome before it is being processed. The size of the frame buffer ofter dominates those of the processing unit such as soft decision Viterbi decoder. The frame buffer for IMT-2000, for example, has to be increased 80 times as large as that of IS-95. One of the parameters deciding the number of bits in a frame will be obviously the number of bits in soft quantization. Start after striking space key 2 times. This paper has studied a new aspect of offset and quantization step size on BER performance and proposes a new 3-bit soft quantization algorithm which shows similar performance as that of 4-bit soft decision Viterbi receiver. The optimal offset values and step sizes for the other practical quantization levels ---16, 8, 4, 2--- have also been found. In addition, a new optimal symbol metric table has been devised which takes the accumulation value of various repeated signals and produces a rescaled 3-bit valu.tart after striking space key 2 times.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.3
• /
• pp.304-315
• /
• 2001

In this paper, we peformed the real-time implementation of AMR(Adaptive Multi-Rate) speech coding algorithm which is adopted for IMT-2000 service using TMS320C6201, i.e., a Texas Instrument´s fixed-point DSP. With the ANSI C source code released from ETSI, optimization is performed to make it run in real-time with memory as small as possible using the C compiler and assembly language. Implemented AMR speech codec has the size of 32.06 kWords program memory, 9.75 kWords data RAM memory, and 19.89 kWords data ROM memory. And, The time required for processing one frame of 20 ms length speech data is about 4.38 ms, and it is short enough for real-time operation. It is verified that the decoded result of the implemented speech codec on the DSP is identical with the PC simulation result using ANSI C code for test sequences. Also, actual sound input/output test using microphone and speaker demonstrates its proper real-time operation without distortions or delays.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.1
• /
• pp.12-20
• /
• 2004

In this paper, the detection of 1 g and 10 g averaged SAR on human head caused by PCS/IMT-2000 handhold phones is analyzed and discussed. Planar structured Single-Semi-disc MPA and double-Semi-disc MPA is designed and resonance characteristics with variety of design parameters are analyzed. As a result, 2.0 ㎓ center frequency, at the bandwidth of single-semi-disc MPA and double-semi-disc MPA are 15.5 ％ and 31 ％, respectively. And monopole antenna with W4 length is designed and compared with double-semi-disc MPA in SARs. The SARs caused by double-semi-disc MPA on folder type handset are 0.811 W/kg and 0.507 W/kg and are about 32.7 ％ lower than monopole-1.206 W/kg and 0.7552 W/kg. While the radiation pattern of the monopole antenna is symmetrical, that of planar structured antenna is asymmetrical and SAR caused by double-semi-disc MPA is less than SAR by the monopole antenna.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.827-830
• /
• 2000

3GPP and ETSI adopted AMR(Adaptive Multi-Rate) as a standard for next generation IMT-2000 service. In this paper, we analyzed algorithm about AMR and optimized ANSI C source on the C complier and assembly language of Texas Instrument . The implemented AMR speech codec requires 28.2MIPS of complexity for encoder and 5.5MIPS for decoder. we performed real-time implementation of AMR speech codec using 82% of TMS320C5402 with 40 MIPS specification. We give proof that the output speech of the implemented speech codec on DSP board is identical with result of C source program simulation. Also the reconstructed speech is verified in the real-time environment consisted of microphone and speaker.