• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.993-994
• /
• 2008

Electrochromic (EC) devices are capable of reversibly changing their optical properties upon charge injection and extraction induced by the external voltage. The characteristics of the EC device, such as low power consumption, high coloration efficiency, and memory effects under open circuit status, make them suitable for use in a variety of applications including smart windows and electronic papers. Coloration due to reduction or oxidation of redox chromophores can be used for EC devices (e-paper), but the switching time is slow (second level). Recently, with increasing demand for the low cost, lightweight flat panel display with paper-like readability (electronic paper), an EC display technology based on dye-modified $TiO_2$ nanoparticle electrode was developed. A well known organic dye molecule, viologen, was adsorbed on the surface of a mesoporous $TiO_2$ nanoparticle film to form the EC electrode. On the other hand, ZnO is a wide bandgap II-VI semiconductor which has been applied in many fields such as UV lasers, field effect transistors and transparent conductors. The bandgap of the bulk ZnO is about 3.37 eV, which is close to that of the $TiO_2$ (3.4 eV). As a traditional transparent conductor, ZnO has excellent electron transport properties, even in ZnO nanoparticle films. In the past few years, one-dimension (1D) nanostructures of ZnO have attracted extensive research interest. In particular, 1D ZnO nanowires renders much better electron transportation capability by providing a direct conduction path for electron transport and greatly reducing the number of grain boundaries. These unique advantages make ZnO nanowires a promising matrix electrode for EC dye molecule loading. ZnO nanowires grow vertically from the substrate and form a dense array (Fig. 1). The ZnO nanowires show regular hexagonal cross section and the average diameter of the ZnO nanowires is about 100 nm. The cross-section image of the ZnO nanowires array (Fig. 1) indicates that the length of the ZnO nanowires is about $6\;{\mu}m$. From one on/off cycle of the ZnO EC cell (Fig. 2). We can see that, the switching time of a ZnO nanowire electrode EC cell with an active area of $1\;{\times}\;1\;cm^2$ is 170 ms and 142 ms for coloration and bleaching, respectively. The coloration and bleaching time is faster compared to the $TiO_2$ mesoporous EC devices with both coloration and bleaching time of about 250 ms for a device with an active area of $2.5\;cm^2$. With further optimization, it is possible that the response time can reach ten(s) of millisecond, i.e. capable of displaying video. Fig. 3 shows a prototype with two different transmittance states. It can be seen that good contrast was obtained. The retention was at least a few hours for these prototypes. Being an oxide, ZnO is oxidation resistant, i.e. it is more durable for field emission cathode. ZnO nanotetropods were also applied to realize the first prototype triode field emission device, making use of scattered surface-conduction electrons for field emission (Fig. 4). The device has a high efficiency (field emitted electron to total electron ratio) of about 60%. With this high efficiency, we were able to fabricate some prototype displays (Fig. 5 showing some alphanumerical symbols). ZnO tetrapods have four legs, which guarantees that there is one leg always pointing upward, even using screen printing method to fabricate the cathode.

• Applied Microscopy
• /
• v.17 no.1
• /
• pp.83-97
• /
• 1987

In order to discriminate the enteroendocrine cell types in the mucosal epithelium of the normal duodenum of the Korean hedgehog (Erinaceus koreanus). The tissues were fixed in the mixture of 1% paraformaldehyde and 1% glutaraldehyde in phosphate buffer (pH 7.2), and postfixed in 2% osmium tetroxide (phosphate buffer, pH 7.2). They were embedded in Araldite, and the ultrathin sections were made by LKB-V ultratome following the inspection of semithin sections stained with toluidine blue-borax solutions. Ultrathin sections contrasted with uranyl acetate and lead citrate were observed with JEM 100B electron microscope. At least six types of enteroendocrine cells distributed in the mucosal epithelium of the duodenum were identified according to their morphological characteristics mainly based on the size, shape, number and electron density of the secretory granules. Type I cells had moderately developed organelles. The secretory granules were pleomorphic ($370X510nm$), and the granule cores with high electron density were enveloped in limiting membrane and characterized by a narrow halo. Type II cells contained an indented nucleus and well-developed organelles. The secretory granules were round (350 nm) and classified in two kinds by electron density, moderate and high. Both granules were surrounded by limiting membrane and those with high electron density showed often a wide halo. Type III cells had an indented nucleus. The secretory granules with various electron density were round (220 nm) in shape. The granules with high electron density were enveloped in limiting membrane and characterized by a narrow halo, but those with low or moderate electron density had not been observed the limiting membrane. Type IV cells contained an indented nucleus and moderately developed organelles. The secretory granules were round (180 nm) in shape, and the granule cores with high electron density were enveloped in limiting membrane and showed often a wide halo. Type V cells had a large amount of rough endoplasmic reticulum. Secretory granules with low or moderate electron density were round (230 nm) in shape, and surrounded by limiting membrane and showed a narrow halo. Type VI cells contained an oval nucleus and well-developed organelles, especially Golgi complex. The secretory granules with high electron density were round (210 nm) in shape. The granules were enveloped in limiting membrane and showed often a wide halo.

• Korean Journal of Clinical Pharmacy
• /
• v.15 no.2
• /
• pp.75-81
• /
• 2005

Community acquired pneumonia (CAP) remains a prevalent and potentially life threatening illness. American Thoracic Society and Infectious Disease Society America recommend combination therapies with ${\beta}-lactam$ plus a macrolide or a fluoroquinolone monotherapy for the empirical treatment of CAP. The aim of this study was to compare moxifloxacin monotherapy with cephalosporin plus azithromycin combination therapies. From January 2004 to March 2005, 18 patients in the moxifloxacin group(MG) and 21 patients in the cefuroxime or ceftriaxone plus azithromycin group(CAG) with CAP were retrospectively reviewed with regard to clinical, laboratory and microbiological data. Each patient was stratified into mild (risk class I-II), moderate (risk class III) and severe (risk class VI, V) group according to and PSI (Pneumonia Severity Index) score. Each group was compared for microbiological eradication, clinical assessment, the length of hospital stay. As results, Total 39 patients with CAP were reviewed. The appropriateness of admission was 83.3% in MC vs. 76.2% in CAC. The mean length of the hospital day was for 8.31 days vs. 7.39 days, days switching parenteral to oral antibiotics in 5.19 days vs. 5.28 days, clinical improvement in 2.43 days vs. 2.61 days in MG vs. CAC. Radiological improvement required 3.75 days vs 3.63 days in MG vs. CAG and bacteriological eradication rate at discharge was the same in the both groups. Mortality rate was 11.1% (2 of 18) vs 14.3% (3 of 21) in MG vs. CAG (p=0.77). Drug cost of the mean 5 hospital days requiring parenteral antibiotics was the most inexpensive in moxifloxacin group for the 147,045 won, and ceftriaxone 1g-azithromycin group for the 170,285 won, cefuroxime bid-azithromycin group for the 207,800 won, ceftriaxone 2g-azithromycin group far the 220,570 won, cefuroxime tid-azithromycin group for the 251,700 won. There was no significant statistical difference in clinical, bacterial, radiological cure and hospital days, and switch to oral days. In conclusion, that i.v. moxifloxacin monotherapy was as effective as azithromycin plus cefuroxime or ceftriaxone combination therapies fur the treatment of CAP. In drug cost analysis, moxifloxacin is less expensive than CAG.

• The Journal of the Korean dental association
• /
• v.53 no.9
• /
• pp.644-655
• /
• 2015

Purpose: This study was conducted to evaluate the effect of the fixture abutment connection type and diameter on the screw joint stability in external butt joint for 2nd surgery and internal cone connected type implant system for 1st and 2nd surgery using ultimate fracture strength. Materials and Methods: USII system, SSII system and GSII system of Osstem Implant were used. Each system used the fixture with two different diameters and cement-retained abutments, and tungsten carbide / carbon coated abutment screws were used. Disc shaped stainless steel metal tube was attached using resin-based temporary cement. The experimental group was divided into seven subgroups, including the platform switching shaped specimen that uses a regular abutment in the fixture with a wide diameter in USII system. A static load was increased to the metal tube at 5mm deviated point from the implant central axis until it reached the compression bending strength at a rate of 1mm/min. Then the deformations and patterns of fracture in threaded connection were compared. Results and Conclusion: 1. In the comparison between the Regular diameter, compression bending strength of SSII system was higher than USII system and GSII system. There was no significant difference between USII system and GSII system. 2. In the comparison between wide diameter, compression bending strength was increased in the order of GSII system, USII system, and SSII system. 3. In comparison between the implant diameter, compression bending strength of the wide diameter was greater than the regular diameter in any system(P<0.05). 4. There was no significant difference between the platform switching (III group) and the regular diameter (I group) in USII system. 5. In USII system, fracture of abutment screw and deformation of both fixture and abutment were observed in I, II and III subgroups. 6. Failure pattern of SSII system, which was the fracture of abutment screw and deformation of the abutment and fixture, was observed in both IV and V subgroups. Fracture of some fixtures was observed in subgroup V. 7. Failure pattern of GSII system, which was the fracture of the abutment screw and deformation of the fixture and the abutment, was observed in both VI and VII subgroups. Apart from other subgroups, subgroup VII demonstrated no bending neither the fracture at the top of the fixture. The compressive deformation of internal slope in the fixture was the only thing observed in subgroup VII.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.7
• /
• pp.25-32
• /
• 2009

The main objective of this study was to examine the removal properties of Cu from water by inflated vermiculites. The component of vermiculites was analyzed by XRF and the concentration of Copper ion was measured by UV-VIS. Serial batch Kinetic tests and batch sorption tests were conducted to determine the removal characteristics for Cu in aqueous solutions. The result shows that removal rate, $K_{obs}$, of Cu are 0.73, 1.52, and 1.71 for initial pH 3, pH 4, pH 5, respectively, and are 3.19, 1.90, and 0.73 for the initial concentration of $1mg\;L^{-1}$, $5mg\;L^{-1}$, $10mg\;L^{-1}$, respectively. It leads to the conclusion that the removal rates are inversely proportional to the initial Cu concentration and are increased proportionally to the initial pHs. Finally, Sorption data were correlated with both Langmuir and Freundlich isotherms. As a result, Langmuir and Freundlich models were well fitted to batch isotherm data with good values of the determination coefficient. but the determination coefficient value for the Freundlich model fit was slightly higher than that of Langmuir model (0.965 for the Freundlich model and 0.936 for the Langmuir model). Using the Langmuir model, the maximum sorption capacity ($Q_{max}$), Freundlich partition coefficient, and the numerical value of n wrer estimated as $1,250mg\;kg^{-1}$, $635.1L\;kg^{-1}$ and 1.69, respectively. These results show that the inflated vermiculites could be used as an excellent adsorbent for copper contained in various types of aqueous solutions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.2
• /
• pp.246-252
• /
• 2010

In order to improve the availability of phytase and probiotics together, a phytase gene from Aspergillus ficuum has been expressed in Lactobacillus. In this study, the transformed Lactobacillus with phytase gene was fed to pigs to determine its effect on pig production, feed conversion and gut microbes. Forty eight, 60-day-old, castrated pigs (Duroc${\times}$Landrace${\times}$Pietrain) were assigned to 6 groups, 8 pigs for each group. Group 1 was the control, group 2 was added with chlortetracycline (500 mg/kg), group 3 was added with the transformed Lactobacillus (500 mg/kg) with 20% (w/w) of calcium monohydrogen phosphate (CMP, $CaHPO_{4}$) removed, group 4 was added with the natural Lactobacillus (500 mg/kg) with 20% (w/w) of CMP removed, group 5 was added with the transformed Lactobacillus (500 mg/kg) with 40% (w/w) of CMP removed, group 6 was added with phytase (500 mg/kg) with 40% (w/w) of CMP removed. The results showed: i) the average daily gain (ADG) was improved in groups 2, 3 and 4 (p<0.05); ii) the diarrhea rates in the groups added with Lactobacillus were lower than in the other groups (p<0.05), in which the transformed Lactobacillus had more effect on reducing digestive disease; iii) the transformed Lactobacillus was most effective in improving the digestibilities of crude protein (CP), calcium (Ca), phosphorus (P), compared with the other groups (p<0.05); iv) Lactobacillus could increase lactic acid bacterium number and ammonia concentrations, and decrease pH values and E. coli number in pig feces (p<0.05); v) the phytase activity in the feces of pigs fed with the transformed Lactobacillus was 133.32 U/g, which was higher than in group 4 (9.58 U/g, p<0.05), and was almost the same as group 6 (135.94 U/g); vi) the transformed Lactobacillus could increase serum concentrations of IgA, triglyceride, and glutamic oxaloacetic transaminase activity (p<0.05), and had no significant effect on other serum indexes (p>0.05).

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.11
• /
• pp.1582-1587
• /
• 2012

This experiment was performed to investigate the effects of lysine (Lys) to DE ratio on growth performance, and carcass characterics in finishing barrows. Ninety six cross-bred finishing barrows ((Landrace${\times}$Yorkshire)${\times}$Duroc, average BW $58.25{\pm}0.48$ kg) were assigned as a randomized complete block design by 2 energy levels and 4 Lys:DE ratios on the basis of BW to one of 8 treatments with 3 replications with 4 animals per pen. The levels of DE and Lys:DE ratio for each treatment were i) DE 3.35 Mcal/kg, 1.5 g Lys/Mcal DE, ii) DE 3.35 Mcal/kg, 1.8 g Lys/Mcal DE, iii) DE 3.35 Mcal/kg, 2.1 g Lys/Mcal DE, iv) DE 3.35 Mcal/kg, 2.4 g Lys/Mcal DE, v) DE 3.60 Mcal/kg, 1.5 g Lys/Mcal DE, vi) DE 3.60 Mcal/kg, 1.8 g Lys/Mcal DE, vii) DE 3.60 Mcal/kg, 2.1 g Lys/Mcal DE, viii) DE 3.60 Mcal/kg, 2.4 g Lys/Mcal DE. During finishing period from 58 kg to 103 kg of BW, increased energy density in the diet increased (p<0.05) ADG and gain:feed ratio, but did not influence ADFI. As Lys:DE ratio was increased, ADG, ADFI and gain:feed ratio were improved in finishing barrows (p<0.05). There were positive interactions (p<0.05) between carcass weight, grade, and backfat thickness and energy density and Lys level (p<0.05). In conclusion, data from our current study suggest that maximum yields including ADG, gain:feed ratio, carcass weight and grade can be achieved by administrating finishing pigs with an ideal Lys:DE ratio, Lys 2.1 g/DE Mcal.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.3
• /
• pp.243-250
• /
• 2011

The effects of food, temperature, salinity, and rearing density on the survival and growth of the swimming crab Portunus trituberculatus, were studied. With regard to food, the larval survival rate to zoea IV was the highest (53.9%) in the mixed feed group (rotifers+ Artemia), followed, in order, by the rotifer, commercial feed, and Artemia groups. The growth of young crabs reared on different diets was the highest in group VI. The survival rate to zoea II at 20 to $30^{\circ}C$ ranged between 77.2% and 83.1%, and was the highest for crab I (17.3%) at $25^{\circ}C$. When young crabs were cultured individually at four different temperatures (20, 25, 30, and $35^{\circ}C$), the growth did not differ significantly at 25 to $30^{\circ}C$, but was higher than at $20^{\circ}C$. The survival rate of larvae to crab I was 12.7 and 11.4% at 25 and 28 psu, respectively, while all of the larvae died at 15 psu. For young crabs, there was no significant difference in growth and survival from 20 to 30 psu. The survival rate decreased with increasing rearing density from zoea I to crab I. Each molting cycle took 1 month from crab I to VIII. Subsequently, the interval increased with growth. The mean body weight of crab XV after 24 months was $428.05{\pm}57.63\;g$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.7
• /
• pp.973-978
• /
• 2017

Objective: The aim of this study was to investigate the effects of simultaneous supplementation of laying hens with alpha-linolenic acid (ALA) resources (flax, perilla, and Eucommia ulmoides [E. ulmoides] seeds) and eicosapentaenoic acid/docosahexaenoic acid (EPA/DHA) resources (Schizochytrium sp.) on egg quality and n-3 polyunsaturated fatty acids (PUFA) profile. Methods: Dietary treatments were as follows: i) diet C (control diet); ii) diet F (diet C+10% flaxseeds); iii) diet P, (diet C+10% perilla seeds); iv) diet E (diet C+10% E. ulmoides seeds); v) diet A (diet C+1.5% microalage); vi) diet AF (diet C+10% flaxseeds+1.5% microalage); vii) diet AP (diet C+10% perilla seeds+1.5% microalgae); viii) diet AE (diet C+10% E. ulmoides seeds+ 1.5% microalage). Results: Egg weight, yolk weight and production ratio were not significantly affected by either algae or in combination with seeds (p>0.05). No significant difference was observed in ALA and DHA concentration in eggs between flaxseed, perila, and E. ulmodies seeds supplementation alone (p>0.05). N-3 PUFA in eggs was slightly improved by microalgae supplementation. The best supplementation, a combination of microalgae and perilla seeds, elevated (p<0.05) ALA from 19.7 to 202.5 mg/egg and EPA+DHA from 27.5 to 159.7 mg/egg. Highest n-3 PUFA enrichment (379.6 mg/yolk) was observed with supplementation of a combination of perilla seed and microalgae (362.2 mg/yolk), followed by a combination of flaxseed and microalgae (348.4 mg/yolk). The ALA, EPA, and DHA content obtained with a combination of microalgae and seeds surpassed the total sum of that obtained with microalgae or ALA-seeds alone. Conclusion: It is feasible to enrich eggs with n-3 PUFAs by perilla or E. ulmodies seeds instead of flaxseeds. Simultaneous supplementation of microalgae and seeds helped improve the transfer from EPA and docosapentaenoic acid into DHA.

• The Korean Journal of Mycology
• /
• v.37 no.1
• /
• pp.11-18
• /
• 2009

Phylogenetic relationships were investigated in the mushroom genus Agrocybe based on sequence data from the internal transcribed spaces(ITS) of nuclear ribosomal DNA(rDNA). Thirty strains including Agrocybe aegerita, A. grocybe cylindracea, A. grocybe praecox, A. grocybe pediades and Unknown Agrocybe species were subjected for the analysis. The Agrocybe spp. were separated into eight distinct groups. Phylogenetic analysis divided these species into eight groups as follows: A. chaxingu within group I, A. salicacola within group II, A. cylindracea and A. aegerita within group III, Agrocybe sp. within group IV and V, and other Agrocybe spp. were grouped within VI, VII, and VIII.