• 제목/요약/키워드: IEEE802.15.4x

검색결과 10건 처리시간 0.025초

Development of Data-Flow Control Algorithm of Wireless Network for Sewage Disposal Facility

  • Jung, Soonho;Shin, Jaekwon;Kang, Jeongjin;Lee, Seungyoun;Lee, Junghoon
    • International journal of advanced smart convergence
    • /
    • 제4권2호
    • /
    • pp.14-19
    • /
    • 2015
  • Recently, water sewage disposal facilities are able to manage real-time data collection and record management through compact broadband modem LAN switching technology. Therefore, it needs more stable and efficient facility management. So, we required practical use of environmental facilities convergence based on broadband integrated modem. In this paper, we proposed short distance wireless communication network of compact broadband modem for sewage disposal facilities. And it received data inside of water treatment facility using the two communication methods (IEEE802.11x and IEEE802.15.4x). Then, our proposed an data-flow control algorithm of wireless network technology will prioritize processing data when emergency happen through collecting data, analysis data and processing. Lastly, we proved usefulness by experiment and simulation analysis.

환경 시설물의 광대역 통합모뎀 근거리 통신망 스위칭 기술 연구 (A Study on Broadband Integrated Modem LAN Switching Technology of Environment Facility)

  • 조주필;신재권;윤경화;이정훈
    • 한국위성정보통신학회논문지
    • /
    • 제9권4호
    • /
    • pp.87-90
    • /
    • 2014
  • 환경시설물의 광대역 통합모뎀 근거리 통신망 스위칭 기술을 통하여 상시 실시간 자료 수집 및 이력관리가 가능함에 따라 안정적이고 효율적인 시설물 관리 및 광대역 통합모뎀을 기반으로 적용 가능한 신기술 융합의 환경 시설물의 실용화가 필요한 상황이다. 따라서 본 논문에서는 환경시설물에 적용 가능한 광대역 통합모뎀 근거리 통신망 스위칭 기술을 제시하였다. 광대역 통합모뎀의 구축방안 및 통신방식을 제시하여 광대역 통합망 유비쿼터스 기반의 환경시설물 관리용 신기술 동향 및 기술을 분석하고, IEEE802.11x와 IEEE802.15.4x 두 가지 통신방식의 연동을 통하여 환경시설물 내 시설물로부터 수신되어지는 데이터의 수집, 해석 및 처리를 통해 이상현상 발생 시 우선순위 부여 등의 워크플로우 기능과 다수의 측정 데이터를 사용자 정의 로직에 따라 서버로 전송하는 기능을 모의실험하고 분석하여 그 유용성을 입증하였다.

TI C66x DSP를 위한 적응형 PCIe 시스템 (Adaptive PCIe system for TI C66x DSPs)

  • 김민재;진화종;안흥섭;최승원
    • 디지털산업정보학회논문지
    • /
    • 제15권4호
    • /
    • pp.31-40
    • /
    • 2019
  • This paper proposes an adaptive PCIe system for TI C66x DSPs. Conventionally, the PCIe system provided by the C66x is a system dependent on the structure in which the primary core writes an application to the DSP memory through the PCIe interface, then activate the secondary core. Due to the dependency between the cores, when developing a project using a PCIe interface, the remaining cores have to be programmed with a concern of the primary core used as the PCIe interface. Therefore, in order to de-couple the connections among the cores, an adaptive PCIe system is proposed, in the paper, in which the cores operate independently compared to the conventional system. Since the core used as the PCIe interface only runs PCIe related operations in the new system, the remaining cores can be fully utilized without concerning the connections with the core for PCIe interface. In order to verify the feasibility of the proposed adaptive PCIe system, the implementations of LTE-A down link, and IEEE 802.11ac are carried out using the evaluation board which includes a TMS320C6670 chip. Altogether, these results support that we demonstrated that the digital signal processing systems with the PCIe Interface can be developed more rapidly by applying the proposed system.

인체 착용형 다중 생체신호 실시간 모니터링 시스템 (Wearable System for Real-time Monitoring of Multiple Vital Signs)

  • 이영동;정완영
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2008년도 춘계종합학술대회 A
    • /
    • pp.249-252
    • /
    • 2008
  • 유비쿼터스 헬스케어에서의 착용형(Wearable) 생체신호 모니터링 시스템은 가슴 부착형, 손목시계형, 신발, 의복형 등과 같은 형태로 많은 연구들이 진행 중에 있으며, 본 논문에서는 가슴 부착형태의 인체 착용형 다중 생체신호 시스템을 설계하고, 다중 생체신호 모니터링 시스템을 위해 심전도와 3축 가속도 센서를 사용하여 심전도 신호 측정 및 신체 움직임에 따라 변화하는 값을 측정할 수 있도록 구현하였다. 구현한 시스템은 생체센서노드, 센서보드, 생체신호 수집을 위한 베이스스테이션 노드로 구성된다. 생체센서노드는 가슴 부착형으로 신체에 착용하여 사용자의 심전도와 가속도 신호를 계측하도록 설계하였으며, 서버 PC에 연결된 베이스스테이션 노드로 계측된 생체신호를 전송한다. 센서보드는 심전도와 가속도 신호를 측정하기 위한 센서로 구성되며, 생체센서노드와 일체형으로 장착이 가능하도록 설계하였다. 또한, 생체신호 수집을 위한 베이스스테이션 노드는 IEEE 802.15.4 무선통신을 통해 생체센서노드로부터 전송된 생체신호를 수집하여 그 수집된 생체신호를 실시간으로 서버 PC에 디스플레이가 가능하다. 본 논문에서 구현한 시스템을 통해 P, QRS, T파로 구성된 심전도 신호를 계측할 수 있었으며, 계측된 신호에서 심전도 신호의 파형 성분들이 나타남을 확인 할 수 있었다. 또한, 3축 가속도 센서에 의해 신체의 움직임에 따라 변화하는 x, y, z의 3축 가속도 출력 값을 얻을 수 있다.

  • PDF

TLSA: A Two Level Scheduling Algorithm for Multiple packets Arrival in TSCH Networks

  • Asuti, Manjunath G.;Basarkod, Prabhugoud I.
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제14권8호
    • /
    • pp.3201-3223
    • /
    • 2020
  • Wireless communication has become the promising technology in the recent times because of its applications in Internet of Things( IoT) devices. The IEEE 802.15.4e has become the key technology for IoT devices which utilizes the Time-Slotted Channel Hopping (TSCH) networks for the communication between the devices. In this paper, we develop a Two Level Scheduling Algorithm (TLSA) for scheduling multiple packets with different arrival rate at the source nodes in a TSCH networks based on the link activated by a centralized scheduler. TLSA is developed by considering three types of links in a network such as link i with packets arrival type 1, link j with packets arrival type 2, link k with packets arrival type 3. For the data packets arrival, two stages in a network is considered.At the first stage, the packets are considered to be of higher priority.At the second stage, the packets are considered to be of lower priority.We introduce level 1 schedule for the packets at stage 1 and level 2 schedule for the packets at stage 2 respectively. Finally, the TLSA is validated with the two different energy functions i.e., y = eax - 1 and y = 0.5x2 using MATLAB 2017a software for the computation of average and worst ratios of the two levels.

절반의 X-슬롯을 가진 무선랜용 이중대역 모노폴 안테나 (Dual-band Monopole Antenna with Half X-slot for WLAN)

  • 신동기;이영순
    • 한국항행학회논문지
    • /
    • 제22권5호
    • /
    • pp.449-455
    • /
    • 2018
  • 본 논문에서는 소형화를 위해 방사패치에 절반으로 절단된 X-슬롯을 가지며, WLAN 이중대역인 2.4 GHz 대역 (2.4 ~ 2.484 GHz) 및 5 GHz 대역 (5.15 ~ 5.825 GHz)용 마이크로스트립 급전 모노폴 안테나를 제안하였다. 여러 파라미터들의 수치들을 최적화하여 주파수 특성을 만족하였으며, 5 GHz 대역의 반사손실 개선을 위해 DGS (defected ground structure)를 사용하였다. 제안된 안테나는 크기가 $24{\times}41mm^2$, 두께는 1.6 mm, 유전상수가 4.3인 FR-4 기판에 설계 및 제작 되었다. 제안된 안테나의 제작 및 측정 결과, 임피던스 대역폭(${\mid}S_{11}{\mid}{\leq}-10dB$)이 2.4 GHz 대역에서는 약 450 MHz (2.27 ~ 2.72 GHz), 5 GHz 대역에서는 약 1340 MHz (4.79 ~ 6.13 GHz)인 대역폭을 얻어 제안한 두 대역의 IEEE 규격(IEEE 802. 11n)을 충분히 만족하는 안테나를 구현했다. 특히 두 대역에서 안정되고 비교적 좋은 무지향성 경향의 방사패턴을 얻을 수 있었으며, 각 대역에서의 안테나 이득은 각각 1.31, 1.98 dBi 임을 확인할 수 있었다.

무선 센서 네트워크 에서 에너지 효율적인 싱크노드 기반 MAC 프로토콜 (SB-MAC : Energy efficient Sink node Based MAC protocol for Wireless Sensor Networks)

  • 전준헌;김성철
    • 한국정보통신학회논문지
    • /
    • 제18권1호
    • /
    • pp.177-182
    • /
    • 2014
  • 본 논문에서는 무선 센서 네트워크에서 에너지 효율적인 싱크노드 기반의 MAC 프로토콜을 제안한다. 본 논문에서 제안되는 싱크 노드 기반 MAC 프로토콜(Sink node-Based MAC: SB-MAC)은 송신자 노드의 에너지 소모를 줄이고 전송 지연을 감소시키기 위해 RB (rapid beacon) 프레임이 사용된다. RB 프레임은 IEEE 802.15.4의 비콘 프레임의 수정된 형태이다. RB 프레임에 포함된 전송 노드의 데이터 길이 정보를 이용하여, 데이터 전송에 참여하지 않는 다른 노드들이 오랫동안 sleep 모드에 머물게 함으로써 에너지 소모를 줄일 수 있다. 이를 통하여 기존의 X-MAC 및 RI-MAC 프로토콜들에 비해 데이터 전송 지연 및 에너지 소모 면에서 더 좋은 성능을 가진다. SB-MAC 프로토콜은 하나의 싱크노드와 다수의 송신 노드들로 구성되어 있는 네트워크 환경에 에너지 효율적인 프로토콜이다.

무선 센서네트워크 기술을 활용한 RSSI기반의 실내위치인식 시스템 (RSSI based Indoor Location Tracking System using Wireless Sensor Network technology)

  • 권준달;신재욱;신광식;이은아;정완영
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2007년도 춘계종합학술대회
    • /
    • pp.364-367
    • /
    • 2007
  • 실내위치인식을 위한 플랫폼으로서 RSSI(Received Signal Strength Indicator)기반으로 Zigbee/IEEE802.15.4표준을 따르는 CC2431(Chipcon, Norway)과 베이스스테이션노드를 결합하여 실내위치인식 시스템을 구현하였다. CC2431은 지정된 위치에서 자신의 현재위치를 전송해주는 레퍼런스노드와 인접해있는 레퍼런스노드들의 현재위치(X, Y좌표)와 RSSI값을 수신받아 내장된 Location Engine에서 자신의 현재위치를 계산하여 베이스스테이션노드로 전송해주는 블라인드노드로 구성이 되어있다. 베이스스테이션노드는 블라인드노드의 현재위치를 전송받아서 PC로 데이터를 넘겨주기 위한 게이트웨이로 사용하였으며 서버측의 원격지뿐만 아니라 외부에서도 블라인드노드의 현재위치를 실시간으로 확인할 수가 있다.

  • PDF

Initial Timing Acquisition for Binary Phase-Shift Keying Direct Sequence Ultra-wideband Transmission

  • Kang, Kyu-Min;Choi, Sang-Sung
    • ETRI Journal
    • /
    • 제30권4호
    • /
    • pp.495-505
    • /
    • 2008
  • This paper presents a parallel processing searcher structure for the initial synchronization of a direct sequence ultra-wideband (DS-UWB) system, which is suitable for the digital implementation of baseband functionalities with a 1.32 Gsample/s chip rate analog-to-digital converter. An initial timing acquisition algorithm and a data demodulation method are also studied. The proposed searcher effectively acquires initial symbol and frame timing during the preamble transmission period. A hardware efficient receiver structure using 24 parallel digital correlators for binary phase-shift keying DS-UWB transmission is presented. The proposed correlator structure operating at 55 MHz is shared for correlation operations in a searcher, a channel estimator, and the demodulator of a RAKE receiver. We also present a pseudo-random noise sequence generated with a primitive polynomial, $1+x^2+x^5$, for packet detection, automatic gain control, and initial timing acquisition. Simulation results show that the performance of the proposed parallel processing searcher employing the presented pseudo-random noise sequence outperforms that employing a preamble sequence in the IEEE 802.15.3a DS-UWB proposal.

  • PDF

The 3 Dimensional Triangulation Scheme based on the Space Segmentation in WPAN

  • 이동명;이호철
    • 공학교육연구
    • /
    • 제15권5호
    • /
    • pp.93-97
    • /
    • 2012
  • Most of ubiquitous computing devices such as stereo camera, ultrasonic sensor based MIT cricket system and other wireless sensor network devices are widely applied to the 2 Dimensional(2D) localization system in today. Because stereo camera cannot estimate the optimal location between moving node and beacon node in Wireless Personal Area Network(WPAN) under Non Line Of Sight(NLOS) environment, it is a great weakness point to the design of the 2D localization system in indoor environment. But the conventional 2D triangulation scheme that is adapted to the MIT cricket system cannot estimate the 3 Dimensional(3D) coordinate values for estimation of the optimal location of the moving node generally. Therefore, the 3D triangulation scheme based on the space segmentation in WPAN is suggested in this paper. The measuring data in the suggested scheme by computer simulation is compared with that of the geographic measuring data in the AutoCAD software system. The average error of coordinates values(x,y,z) of the moving node is calculated to 0.008m by the suggested scheme. From the results, it can be seen that the location correctness of the suggested scheme is very excellent for using the localization system in WPAN.