• Journal of information and communication convergence engineering
• /
• v.4 no.2
• /
• pp.62-66
• /
• 2006

The objective of this thesis is to measure the limit of the real space where wireless Local Area Network (LAN) is used, and to apply this result as reference to set up a real Wireless LAN environment. The organized circumference was composed of Wireless LAN based on IEEE 802.11b of the American standard, and the examination is carried out on the campus. On the real condition of office environment and open space, the ratio of available distance to a signal at each distance was measured and this result was studied as data to embody wireless LAN on the campus. The measurement under an indoor environment was executed under circumstance having two walls and open space, however, was executed respectively under three circumstances: Where no obstacle, where one wall exists, and where two or more walls exist.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.635-639
• /
• 2010

A multi-resonance antenna for wireless communications is reported. By using double inverted-L strips, the antenna demonstrated compact size (15 mm ${\times}$ 14 mm) including the ground, multi-band operation for IEEE 802.11 a/b/g/p applications, and wide bandwidth of 1.7 GHz at 5 GHz band. Good radiation features of omni-directional patterns and 1.98 and 2.29 dBi peak antenna gains for the lower and upper bands, respectively, have been achieved.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2266-2284
• /
• 2012

Recent studies have indicated that a significant improvement in wireless video throughput can be achieved by Cross Layer Design with Side-information (CLDS) protocols. In this paper, we derive the operational rate of a CLDS protocol operating over a realistic wireless channel. Then, a Rate-Distortion (R-D) empirical model for above-capacity Scalable Video Coding (SVC) is deduced to estimate the loss of video quality incurred under inaccurate rate estimation scenarios. Finally, we develop a novel Unequal Error Protection (UEP) scheme which leverages the characteristics of LDPC codes to reduce the distortion of video quality in case of typically-observed burst wireless errors. The efficacy of the proposed rate adaptation architecture over conventional protocols is demonstrated by realistic video simulations using actual IEEE 802.11b wireless traces.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1A
• /
• pp.34-40
• /
• 2003

Because that the wireless LAN and the Bluetooth which are currently used are operating at the ISM 2.4GHz, we must meet the frequency interference So performance degradation is occurred by frequency interference between the wireless LAN and the Bluetooth In this paper, for decreasing the errors between the communication systems because of the interferences, we analysis the influence of mutual interference between the local communication systems and the specification of frequency interference problem on the Bluetooth, the wireless LAN and home electronic products

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.607-610
• /
• 2005

무선랜은 유선랜의 대안으로 개발되어 설비의 용이성으로 인하여 특수분야와 특수용도로만 이용되어오다가 최근 들어 그 표준과 기술이 급속도로 발전하여 현재는 건물간의 중계회선 또는 광범위의 유저들을 위한 일대일 통신등의 수단과 고속인터넷의 중계회선, 그리고 멀티미디어 대폭을 요구하는 화상통신의 수단으로 이용되고 있다. 개발당시 10Mbps의 전송속도에서 시작하여 최근에는 100Mbps 대역까지 확장되어가고 있는 추세이다. 특히 캠퍼스무선랜의 경우 인터넷 중계회선으로서 체감적으로 차이는 있지만 최소 10Mbps속도로 반경 100~200m 범위를 보장하여야한다고 사료된다. 본 논문에서는 실제이용환경에서 무선랜이 인터넷 중계회선으로서의 효용성입증을 위하여 측정하였다. 측정한 결과 IEEE802.11b 를 기반으로 네트워크를 구성하는 경우 최소 3개 이상의 AP로서 구성하여야한다는 것을 입증하였다. 향후 해양환경에서의 무선랜의 성능평가를 수행함에 그목적이 있다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.883-886
• /
• 2005

This paper proposed a wireless measurement system (WMS) for an effective condition monitoring using wireless communication. WMS consists of two parts: transmitter(TM) acquired a dynamic signal from physical system using ICP type accelerometer sensor. An acquired signal modulated through the low/high pass filter and amplifier in DAQ board, which converted to digital signal. Embedded board(E-board) transferred digital signals to base station(BS) through the socket IEEE.802.11.b. BS is adopted IOCP server structure. Because it can acquired signal well during transferred digital signal. Signal processing used LabVIEW Library, BS(server) designed to realize multi-thread using visual C++.NET for 1 many meaning data processing

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11A
• /
• pp.1027-1034
• /
• 2005

IEEE802.15.4a, which is started to realize the PHY layer including high precision ranging/positioning and low data rate communication functions, requires a simple and low power consumable transceiver architecture. To satisfy this requirements, the simple noncoherent on-off keying (OOK) UWB transceiver with the parallel energy window banks (PEWB) giving high precision signal processing interface is proposed. The flexibility of the proposed system in multipath fading channel environments is acquired with the pulse and bit repetition method. To analyze the bit error rate (BER) performance of this proposed system, a noise model in receiver is derived with commonly used random variable distribution, chi-square. BER of $10^{-5}$ under the line-of-sight (LOS) residential channel is achieved with the integration time of 32 ns and signal to noise ratio (SNR) of 15.3 dB. For the non-line-of-sight (NLOS) outdoor channel, the integration time of 72 ns and SNR of 16.2 dB are needed. The integrated energy to total received energy (IRR) for the best BER performance is about $86\%$.

• Journal of Internet Computing and Services
• /
• v.5 no.3
• /
• pp.99-108
• /
• 2004

We have designed and implemented a Voice Messenger System(VMS) for sending and receiving voice data in order to measure and analyze the performance of a multimedia data transfer system using PDAs(Personal Digital Assistants) in a fast wireless LAN environment. The VMS has been configured as an infrastructure network by integrating a wireless intra-network based on IEEE 802,11 b standard with a wired network based on Ethernet. A sending time, a receiving time and a round-trip time(RTT) have been measured by varying its pecket size from 256 to 6656 bytes, Besides, we have performed the experiments to see which NIC is more stable between CF and PCMCIA type in such a wireless LAN environment, The results of such experiments show that the NIC with PCMClA type is better than that with CF type from the points of both efficiency and stability. The performance of a notebook computer with the attachment of a wireless NIC that is used as a VMS client is almost constant by varying its packet size when transferring voice data. However, with PDA client, in the case of receiving packets from the VMS server, the performance is the best when the pecket size is 6656 bytes, In addition, in the case of sending packets from PDA client to the VMS server, the performance is the best when the packet size is 4096 bytes. Even with the same pecket size, the time of receiving packets from the VMS server to PDA is longer than the time of sending packets from PDA to the VMS Server, Thus, we conclude that when PDA is used as a client by applying different pecket size when sending and receiving packets should be achieved a better performance over a wireless LAN environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.272-278
• /
• 2015

This paper analyzed interference impact between wireless headset and Wireless Fidelity which get a high possibility of simultaneously operating in the Industry Science Medical(ISM) bands. Analysis methods of Minimum Coupling Loss(MCL) and Monte Carlo(MC) were applied by using the characters and parameters referenced to Institute of Electrical and Electronic Engineers(IEEE) 802.11b. The protection distance between interferer (WiFi transmitter) and victim (Wireless headset receiver) was calculated through the MCL. The protection distance was obtained for the case of single interferer, and the maximum allowable number of multiple interferers was computed according to the cell radius of a victim system to meet 5 % below of interference probability by using a statistical analysis based on the MC method. The analysis results are expected to be used as a guideline to coexist the wireless headset and low power devices in the ISM band.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.274-276
• /
• 2003

전력선 통신은 새로운 통신전용 선로나 별도의 추가 시설 없이, 기존의 전력 공급용 전력선로를 통신선로로 병용할 수 있다는 장점을 갖고 있다. 하지만 이러한 전력선 통신은 다양한 부하의 운전과 빈번한 부하의 기동 정지로 인하여 잡음이 발생하며 이에 본 연구에서는 전력선 채널의 협대역 잡음에 대처하는 변조방식을 제시함과 동시에 최근 들어 고용량 데이터 전송이 빈번한 홈 네트워크분야에 응용될 수 있는 고속 전력선 통신 기법을 제안하고자 한다. 본 논문에서 제안한 전력선 통신의 변조기법은 현재 무선 LAN에서 보편화된 변조방식으로 적용되고 있는 IEEE 802.11b의 CCK(Complementary Code Keying) 변조 방식이다. 채널 모델링은 댁내 전력선망을 기준으로 $10kHz{\sim}30MHz$ 대역에서의 전력선로 및 가정용 부하 특성에 기초한 모델링을 하였고 전력 계통 과도해석 소프트웨어인 PSCAD로 채널 모델을 구성하여 홈네트워크 환경에서의 전력선 통신의 신호 특성을 분석하였다.