• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.6
• /
• pp.726-732
• /
• 2019

In this study, we proposed an asymmetric differential inductor to improve the linearity of differential power amplifiers. Considering the phase error between differential signals of the differential amplifier, the location of the center tap of the differential inductor was modified to minimize the error. As a result, the center tap was positioned asymmetrically inside the differential inductor. With the asymmetric differential inductor, the AM-to-AM and AM-to-PM distortions of the amplifier were suppressed. To confirm the feasibility of the inductor, we designed a 2.4 GHz differential CMOS PA for IEEE 802.11n WLAN applications with a 64-quadrature amplitude modulation (QAM), 9.6 dB peak-to-average power ratio (PAPR), and a bandwidth of 20 MHz. The designed power amplifier was fabricated using the 180-nm RF CMOS process. The measured maximum linear output power was 17 dBm, whereas EVM was 5%.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.1
• /
• pp.121-128
• /
• 2018

Internet of Things architecture connected to the Internet is a technology. However, Many paper research for the lightweight Protocol of IoT Environment. In these Paper excluded secure problem about protocol. So Light weight Protocol has weakness of secure in IoT environment. All of IoT devices need encryption algorithm and authentication message code for certain level of security. However, IoT environment is difficult to using existing security technology. For this reason, Studies for Lightweight IPsec is essential in IoT environment. For Study of Lightweight IPsec, We analyze existing protocols such as IPsec, 6LoWPAN for IEEE 802.15.4 layer and Lightweight IPsec based 6LoWPAN. The result is to be obtained for the lightweight IPsec protocols for IoT environment. This protocol can compatible with Internet network.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.6
• /
• pp.2263-2268
• /
• 2010

In this paper, the hybrid compensation algorithm($A_{HB}$) for localization using the Compensation Algorithm distance($CA_d$) and the Algorithm of Equivalent Distance Rate(AEDR) in SDS-TWR(Symmetric Double-Sided Two-Way Ranging) is suggested and the performance of the proposed algorithm is analyzed by practical experimentations. From experimentations, it is confirmed that the errors are reduced in 28 coordinates of total 32 coordinates in the experimental region and the errors are reduced about above 70% in the assigned 3 type error level ranges by $A_{HB}$. Also, it is analyzed that the average localization error is reduced from 2.67m to 1.19m as 55.4% in total 32 coordinates by $A_{HB}$ and the error compensation capability of $A_{HB}$ is very excellent as above 90%. From above results, we have seen that the error reduction ratio and error compensation capability of $A_{HB}$ is more excellent than each $CA_d$ or AEDR.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.8 s.350
• /
• pp.91-96
• /
• 2006

High efficiency switching mode circuits such as class I amplifiers have been well known in the MHz frequency range. The class E amplifier is a type of switching mode amplifier offering very high efficiency approaching 100%. In this paper, the class E amplifier has been designed by using the harmonic balance method of circuit simulator. The designed amplifier is realized by using pHEMT and microstrip line, shows 66% power added efficiency (PAE) at 2.4GHz with 17.6dBm output power. With -3dBm input power of wireless LAN, measured output spec01m can meet the required IEEE 802.11g standard spectrum mask. That means the required amplifier back off of 9dB from $P_{ldB}$ to satisfy the required wireless LAN spectrum mask.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.145-151
• /
• 2008

In this paper, a dual band microstrip antenna with similar radiation pattern for the satellite internet service is proposed. The proposed antenna has two Y-shaped slots on the microstrip patch that is fabricated on RO4003 substrate with a dielectric constant of 3.38 and a thickness of 0.508 mm, and operates in the 2 GHz and 5 GHz bands. The size of the antenna is $50\times47.5\times6.5\;mm^3$, and fed by coaxial cable. The measured bandwidths of the antenna are 2.398$\sim$2.507 GHz and 5.458$\sim$5.972 GHz for VSWR<2. The measured gains are 8.92 dBi and 7.74 dBi, respectively, for the lower and upper bands.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6B
• /
• pp.433-442
• /
• 2012

We have proposed a solution to multicast services and an advanced quality of service (QoS) mechanism on a packet transport system (PTS) based on PBB-TE. The point-to-multipoint (PtMP) connection in the PBB-TE system have been realized by grouping point-to-point (PtP) PTL trunks and mapping a BSI onto the PtP PTL trunks using a multicast backbone destination address. To provide end-to-end QoS of the PtMP services, the hierarchical QoS scheme for backbone service instances and connection-oriented paths has been implemented in the PTS. For providing different capabilities for service selection and priority selection, the PTS offers to customers three basic types of the port-based, C-tagged, and S-tagged service interface defined by the IEEE 802.1ah. To offer to customers different capabilities of the layer 3 applications and services, moreover, an IP-flow service interface have been added. In order to evaluate traffic performance for PtMP services in the PTS, the PtMP throughputs for the link capacity of 1 Gbps at the four service interfaces were measured in the leaves of the ingress edge node, the transit node, and the egress edge node. The throughputs were about 96 % because the B-MAC overhead of 22 bytes occupies 4% of the 512-byte packet. The QoS performance is ability to guarantee an application or a user a required bandwidth, and could be evaluated by the accuracy of policing or shaping. The accuracy of the policing scheme and the accuracy of the shaping scheme were 99% and 99.3% respectively.

• Journal of Internet Computing and Services
• /
• v.15 no.2
• /
• pp.9-18
• /
• 2014

The sensors attached on/in a person are moved since human body frequency changes their activity, therefore in wireless body area networks, nodal mobility and non-line-of-sight condition will impact on performance of networks such as energy efficiency and reliable communication. We then proposed schemes which study on forwarding decisions against frequent change of topology and channel conditions to increase reliable connections and improve energy efficiency. In this work, we control the size of packets, forwarding rate based on ratio of input links and output links at each node. We also robust the network topology by extending the peer to peer IEEE 802.15.4-based. The adaptive topology from chain-based to grid-based can optimal our schemes. The simulation shows that these approaches are not only extending network lifetime to 48.2 percent but also increase around 6.08 percent the packet delivery ratio. The "hot spots" problem is also resolved with this approach.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.705-711
• /
• 2013

In this paper, we present a low-complexity non-coherent demodulation algorithm and hardware architecture for LR-WPAN systems which can support the variable data rate for various applications. The need for LR-WPAN systems that can support the variable data rate is increasing due to the emergence of various sensor applications. Since the existing symbol based double correlation (SBDC) algorithm requires the increase of complexity to support the variable data rate, we propose the sample based double correlation (SPDC) algorithm which can be implemented without the increase of complexity. The proposed non-coherent demodulator was designed by verilog HDL and implemented with FPGA prototype board.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6A
• /
• pp.634-639
• /
• 2006

In this paper an MMIC 2-stage power amplifier is designed and fabricated for 5GHz wireless LAN applications using $0.5{\mu}m$ gate length PHEMT transistors. The PHEMT gate width is optimized in order to meet the linearity and efficiency of the MMIC power amplifier. The $0.5{\mu}m\times600{\mu}m$ PHEMT for the drive stage and $0.5{\mu}m\times3000{\mu}m$ PHEMT for the amplification stage are the optimized sizes to achieve more than 25dBc of third order IMD at the power level of 3dB back-off from the input P1dB and more than 22dBm output power under a supply voltage of 3.3V. The two-stage MMIC power amplifier is designed to be used for the both of HIPERLAN/2 and IEEE 802.11a because of its broadband characteristics. The fabricated PHEMT MMIC power amplifier exhibits a 20.1dB linear power gain, a maximum 22dBm output power, a 24% power added efficiency under 3.3V supply voltage. The input and output on-chip matching circuits are included on a chip of $1400\times1200{\mu}m^2$.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.106-114
• /
• 2015

Wireless Body Area Network(WBAN) is a network standard around a human body which connects various medical sensor and devices It has to satisfy various demands such as data transmission rate, priority, and delay time. In this paper, considering a data priority and transmission delay time, is proposed to improve efficiency of WBAN service depending on congestion status of network. The proposed algorithm operates with adapted data removal probability according to data priority when the hub buffer is congested than before. And in the case of lower congestion within the hub buffer data is served considering data delay time. Through the comparison with other existing scheduling algorithms, it is confirmed that quality of WBAN service is improved due to lower data loss rate of medical data and less delay time in the proposed algorithm.