• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.336-340
• /
• 2007

This paper proposes a multicast scheme over IEEE 802.16 networks which support multiple upper layer protocols such as ATM, IPv4 packets, IPv6 packets, IEEE 802.3 over IPv4 and so on. The multicast capabilities over IEEE 802.16 are important both control plane and data plane. The proposed multicast scheme can be divided into two types: direct mapping and indirect mapping. The direct mapping scheme is that layer 3 address is directly mapped into CID information which is used for connection identifier at IEEE 802.16 link layer. The indirect mapping scheme has two steps for mapping between layer 3 address and layer 2 CID. Firstly, a layer 3 address translates to Ethernet MAC address with group MAC address. Secondly, a group MAC address is mapped into CID. The mapping scheme depends on the upper layer protocols.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.6
• /
• pp.112-120
• /
• 2009

Both security enhancement in wireless and fast access for mobility are required to employ wireless LAN in ITS (Intelligent Transportation Systems). However, for the case of employing IEEE 802.11i security standard, it is known that the user authentication procedure of IEEE 802.1x and 4-way handshake procedure for stronger security enforcement may not be suitable for ITS due to its large delay. In this paper, we propose fast authentication method to resolve the above authentication delay problem, and verify its performance via simulation analysis.

• Journal of Korea Multimedia Society
• /
• v.15 no.5
• /
• pp.587-594
• /
• 2012

IEEE 802.15.6 standard technology is proposed for low-power wireless communication in, on and around body, where vital signs such as pulse, blood pressure, ECG, and EEG signals are transmitted as a type of data packet. Especially, these vital signs should be delivered in real time, so that the latency from slave node to hub node can be one of the pivotal performance requirements. However, in the case of IEEE 802.15.6 technology data retransmission caused by transmission failure can be done in the next superframe. In order to overcome this limitation, we propose an adaptive polling algorithm for IEEE 802.15.6 technology. The proposing algorithm makes the hub to look for an appropriate time period in order to make data retransmission within the superframe. Through the performance evaluation, the proposing algorithm achieves a 61% and a 73% latency reduction compared to those of IEEE 802.15.6 technology in the environment of 70% traffic offered load with 10ms and 100ms superframe period. In addition, the proposing algorithm prevents bursty traffic transmission condition caused by mixing retransmission traffic with the traffic reserved for transmission. Through the proposing adaptive polling algorithm, it will be possible to transmit time-sensitive vital signs without severe traffic delay.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.4
• /
• pp.243-248
• /
• 2011

A FFT/IFFT processor is the key component for orthogonal frequency division multiplexing (OFDM) systems based IEEE 802.11n wireless local area network (WLAN). There exists many radix algorithms according to the structure of butterfly as FFT sub-module, each has the pros and cons on hardware complexity. Here, mixed radix algorithms for 64 and 128 FFT/IFFT processors are proposed, which reduce hardware complexity by using mixture of radix-23 and radix-4 algorithms. The proposed algorithm finish calculation within 3.2${\mu}s$ in order to meet IEEE 802.11n standard requirements and it has less hardware complexity compared with conventional algorithms.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.6
• /
• pp.823-829
• /
• 2013

IEEE 802.16 standard specifies the broadband wireless access (BWA) system including sleep mode to minimize the power consumption by a mobile station (MS). This paper outlines the overall operation of sleep mode and proposes a method to improve the power saving efficiency of the IEEE 802.16 sleep mode. The proposed method not only decreases the number of bytes that a MS in sleep mode needs to receive during listening interval but allows to indicate a control-specific operation such as periodic ranging.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.6
• /
• pp.1175-1180
• /
• 2009

Frame Aggregation is a promissing technology for improving MAC throughput in IEEE 802.11n. In IEEE 802.11n, two frame aggregation schemes, Aggregate MSDU (A-MSDU) and Aggregation MPDU (A-MPDU), are defined. In this paper, we analyze the performance the two-level frame aggregation scheme where A-MSDU and A-MPDU are combined. We develop the analytical model for the two-level frame aggregation scheme and present numerical results on the effect of bit error rate, aggregation size, and the number of nodes.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.12
• /
• pp.45-51
• /
• 2010

The main issue in mobile cloud computing is how to support a seamless service to a mobile mode. Mobile IPv6 (MIPv6) is a mobility supporting protocol which is standardized by the Internet Engineering Task Force (IETF). Mobile IPv6 fast handovers (FMIPv6) is the extension of MIPv6 which is proposed to overcome shortcomings of MIPv6. Recently, fast handovers for Mobile IPv6 over IEEE 802.16e which is one of broadband wireless access systems has been proposed by the IETF. It was designed for supporting cross-layer fast handover. In this paper, we propose an enhanced cross-layering mobile IPv6 fast handover over IEEE 802.16e networks. In our scheme, a new access router generates a new address for the mobile node by using a layer 2 trigger. We utilize a layer 2 message which is sent from a new base station to the new access router in order to inform the new access router of information of the mobile node. A previous access router sends a binding update message to the mobile node's home agent when it acquires the new address of the mobile node. We evaluate the performance of the proposed scheme compared with the existing schemes in terms of the signaling cost and the handover latency. From the results, we observe that the proposed scheme can support fast handover effectively over IEEE 802.16e networks than existing schemes.

• Journal of Advanced Navigation Technology
• /
• v.13 no.2
• /
• pp.214-223
• /
• 2009

In this paper, we analysed and simulated the high speed mobile wireless channel for IEEE802.11p WAVE/DSRC standard draft. IEEE802.11p working group measured and suggested 6 channel model for WAVE/DSRC systems which is used for vehicle to vehicle or vehicle to infra communication. However, the models only provides numerical model, it did not provide Computer based software simulation model. So it can not be used directly for performance estimation of WAVE system. In this paper we suggested simulation technique of WAVE channel simulation which is developed S/W based WAVE channnel simulator. The simulation results for PSD, LCR, and AFD are also obtained, which can be used for performance estimation of IEEE802.11p based vehicular communication system.

• Information and Communications Magazine
• /
• v.8 no.12
• /
• pp.57-72
• /
• 1991

• The Magazine of the IEIE
• /
• v.32 no.6 s.253
• /
• pp.43-51
• /
• 2005

시속 60 km/hour의 시내 주행 속도로 이동하면서도 언제 어디서나 인터넷 서비스를 제공받을 수 있는 휴대인터넷 서비스는 정보통신부 IT839 전략의 일환으로 추진되고 있다. 휴대인터넷 서비스는 2003년부터 HPi (High-speed Portable Internet) 라는 프로젝트 명으로 한국전자통신연구원, 주요 제조업체 및 사업자를 중심으로 규격 및 시스템이 개발되고 있으며 운용 주파수 대역은 2300$\~$2400 MHz of고 TDD (Time Division Duplex), OFDMA (Orthogonal Frequency Division Multiple Access) 방식을 사용한다. 휴대인터넷과 관련된 표준화 기구로는 IEEE 802.16 및 TTA PG302가 있다. 휴대인터넷 서비스 제공을 위한 국내 규격은 IEEE 802.16 표준과의 호환성이 완벽하게 유지되어야 한다. IEEE 802.16 표준은 성격상 프로파일 설정에 따라 다양한 형태의 시스템 형상이 가능하다. 따라서 TTA PG302에서 규정되는 표준은 IEEE 802.16 표준의 완전한 부분집합으로 정의되고 PG302 표준화 활동은 규격 작업과 더불어 시스템 형상 및 성능 검증을 위한 프로파일 및 컨포먼스 테스트를 위한 작업이 포함된다. 본고에서는 휴대인터넷과 관련된 IEEE 802.16 표준화 동향을 소개하고 향후 방향을 전망해 본다.