• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.5
• /
• pp.25-35
• /
• 2015

Handoff is a critical issue for seamless roaming in IEEE 802.11-based wireless networks. In order to provide real-time services, handoff mechanism must be provided. However, the IEEE 802.11 standard handoff is not appropriate to provide the services, because it is based on the full-scanning approach which spends too much time searching Access Point (AP). In this paper, we propose a new scheme, which can reduce the scanning latency. A station performs full-scanning operation for finding APs when it enters wireless networks for the first time. The station sends the scanned channel information to AP. AP maintains the neighbor channel table based on the information received from stations. A station performs the partial-scanning by using the table. Therefore, the proposed scheme can reduce the scanning latency.

• Journal of Advanced Navigation Technology
• /
• v.23 no.6
• /
• pp.589-596
• /
• 2019

With the proliferation of intelligent transportation system (ITS) with dedicated short-range communication (DSRC) deployment, there are various applications requiring different throughput and reliability performance. To meet the enhanced throughput requirements in newly generated applications, IEEE 802.11bd is proposed to standardize for support of enhanced throughput and latency, preserving the fairness with previously deployed WLAN V2X devices. One of the main features of IEEE 802.11 bd is 20 MHz transmission to support the high data rate. In this paper, the primary channel selection method is proposed to guarantee the fairness with frame transmissions with 10 MHz bandwith including communications in WLAN V2X devices deployed with IEEE 802.11p. Simulation shows that the proposed channel access method for 20 MHz transmission with primary selection preserves the fairness without the change of channel access method in wide-band transmission.

• Journal of KIISE:Information Networking
• /
• v.33 no.5
• /
• pp.355-368
• /
• 2006

This paper introduces a new split-TCP approach for improving TCP performance over IEEE 802.11-based wireless LANs. TCP over wireless LANs differently from wired networks is not aggressive, which is a fundamental reason for poor performance. Therefore, we propose TAS (TCP-Aware Sub-layer) to migigate this problem. Our scheme extends the split-connection approach that divides a connection into two different connections at a split point such as an access point (AP). Using TAS, a wireless node emulates TCP ACK packets using MAC ACK frames, instead of receiving real TCP ACK packets. We compared TAS with both normal TCP and I-TCP (Indirect TCP) by NS2 simulation. Results show that TAS achieves higher throughput, more fair resource allocation and, in power-saving mode, shorter delays.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.113-118
• /
• 2006

Recently, wireless LANs are often applied in home or office because of its various of convenience. Frequency rage of wireless LANs specified by IEEE 802.11b is at 2.4 GHz. The bluetooth, the microwave oven, and the PDA(Personal Digital Assistants) uses ,however, the same frequency band. So problems will be produced in these environments, such as multi-pass interference and system-to-system interference. These problems can be eliminated by using EM wave absorber. In this paper, we designed and fabricated EM wave absorber using Sendust, $Al(OH)_3$, and CPE. The double-layered EM wave absorber with thickness of 1.5 mm has absorption ability more than 10 dB at 2.4 GHz.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.2 s.332
• /
• pp.75-80
• /
• 2005

In this paper, 2-stage power amplifier has been designed for 5.8GHz wireless LAN application. The power amplifier PldB output power has 21.6dBm at 5.8GHz frequency. Also the power amplifier shows 17.6dB gain and -17.8dB input return loss at 5.725GHz to 5.825GHz. The OFDM modulation and transmission block have been modeled in order to analyse the relationship between the power amplifier distortion and output ACPR for the IEEE 802.11a wireless LAN. The nonlinear characteristic of the power amplifier has been modeled as AM-to-AM and AM-to-PM using the behavioral model, and the output spectrum is analysed with the phase distortion variation. Also, amplifier back-off value from PldB to satisfy the required IEEE 802.11a standard spectrum mask has been simulated with phase distortion, and the simulation data have been compared to the measurement result collected by using the pre-distortion technique.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05b
• /
• pp.1485-1488
• /
• 2003

IEEE 802.11 무선 랜 환경에서 멀티미디어 트래픽이 효과적으로 전송퇴기 위해서는 정해진 딜레이 바운드내에서 전송이 완료되어야 한다 대표적인 멀티미디어 트래픽인 음성신호를 전송할 때의 단방향 딜레이 바운드는 echo canceller를 쓰지 않았을 경우 $25ms{\sim}30ms$ 이다. 딜레이 바운드를 지키지 못하고 전송된다면 시간에 민감한 음성신호의 특성 때문에 음성품질이 유지되지 않을 뿐만 아니라 채널의 혼잡을 유발하게 된다. 본 논문에서는 음성의 품질이 보장되는 기준을 95%이상의 패킷이 성공적으로 전달되는 경우로 제한하여 음성의 딜레이 바운드에 관한 분석을 시도하였다. 이를 위해 음성패킷이 drop될 확률을 수학적인 분석을 통해 유도하고 시뮬레이션을 통한 검증을 시도하였다. 시뮬레이션에서는 IEEE 802.11의 두 가지 기본적인 MAC(Multiple Access Control) 프로토콜인 DCF와 PCF를 사용해서 음성신호를 전송할 때 딜레이 바운드를 지키지 못하는 음성 패킷을 사전에 drop 시킴으로써 몇 개의 음성 노드가 손실율 5% 이내 (음성의 품질이 유지되는 한계)를 만족시키는지를 음성신호를 발생시키는 STA 수와 손실율의 관계를 통해 알아보았다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10a
• /
• pp.667-669
• /
• 2003

IEEE 802.11 표준에 포함되어 있는 WEP 방식의 무선 랜 보안이 취약한 것으로 알려진 후 WEP을 대치할 새로운 표준이 802.1li 워킹그룹에 의하여 작성되고 있다. Wi-Fi는 중간단계로서 802.1li의 일부만을 구현하는 WPA 규격을 만들었다. 이 규격은 기존의 하드웨어를 그대로 사용하면서 소프트웨어와 펌웨어 갱신만으로 기존의 무선랜 취약점을 제거할 수 있게 한다. WPA규격을 준수하는 무선 랜 액세스포인트의 개발을 위하여 기존의 액세스포인트 디바이스 드라이버를 WPA를 지원하도록 수정하였으며, 사용자 인증 및 키 교환을 수행하는 소프트웨어를 설계 및 개발하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.9
• /
• pp.3-7
• /
• 2015

Recently, a lot of research effort has been directed toward spectrum sensing and identification of OFDM signals as the OFDM technique has been adopted for transmission in many wireless communications standards. Among them, two popular WLAN standards, IEEE 802.11a and IEEE 802.11n, have a very similar OFDM symbol structure in terms of the lengths of CP(cyclic prefix) and effective OFDM symbol and so it is not straightforward to distinguish them with existing spectrum sensing methods based on the difference in the parameters. In this paper, we present a spectrum sensing strategy for identifying them by exploiting the fact that they employ different bandwidths and examine its performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.177-181
• /
• 2004

It is as research about embodiment of MAC algorithm that is point of wireless LAN technology that is radio skill that is receiving present head of a family footlights, and embodied MAC that is algorithm that control modem Rf and host interface to level that existent common use radio AP and send-receive of high speed are available that embody function that is presented to IEEE 802.11 specs using H/W and S/W. When embody actually, tested module that embody actually using module modem and RF part because test is impossible after have common use product. Also, module that embody actually designed, and is expected to be utilized in radio LAN system construction of high speed late considering CRC and FCS ewer on channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3A
• /
• pp.288-292
• /
• 2004

Recently the application area of wireless LAN has been increased, rapidly. The application area was limited in indoor, but as the data throughput and performance of wireless LAN becomes better the application is to extend to the Internet connection and wireless bridge in outdoor. In this paper, the data throughput of wireless LAN in mobile environment is measured, and the usability of wireless LAN for ITS, Telematics, and LBS is confirmed.