• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04a
• /
• pp.127-129
• /
• 2003

현재 데이터의 양은 인터넷 관련 비즈니스/전자상거래 등 인터넷 프로토콜(IP) 네트워크를 이용한 저장 장치의 데이터 증가를 가져오게 되었다. 본 논문에서는 펜티엄 프로세서, 고속 이더넷 IDE RAID 시스템 (IDE RAID Controller와 IDE 디스크로 구성)과 iSCSI(Internet Small Computer System Interface) 프로토콜을 이용하여 저렴한 비용으로 비교적 우수한 성능의 리눅스 기반의 저장장치 시스템을 설계 구현하였다. 또한 저장장치 시스템의 벤치마크 프로그램인 ioZone을 사용하여 SCSI RAID 시스템으로 구성된 저장 장치 시스템과의 성능을 비교 분석하여 가격대비 성능이 비교적 우수함을 보여준다. 끝으로. 향후 SATA(Serial ATA)를 이용한 저장장치 시스템의 전망을 가늠해본다.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.1037-1040
• /
• 1999

In this paper, we designed the extended ATA(AT Attachment interface with extension) interface that combines with goods price and ability and intellectual behavior of SCSI, for make progress the ability and structure of ordinary interface for connect with device of using PC. ATA is establish a standard of IDE(Intelligent Drive Electronics) public in small form factor. SCSI bus is device behaving intellectual and have stable hardware structure, calssified instructions structure. But it is device that difficult to buy, because of price of more than two times. The other side, ATA device is worse than SCSI bus in part of ability, but it came to SCSI in part of speed after improve and it's price is less expensive. another improvement of ATA is a standard of ARAP(AT Attachment Packet Interface) and use method of packet transmission and behaves as if SCSI use a method. Finally, improvement of ATAPI behave from interface of only HDD to ability of ordinary interface. This paper propose the structure of extended interface that satisfied the price and ability.

• IE interfaces
• /
• v.15 no.1
• /
• pp.73-81
• /
• 2002

In mobile phone, complex user interface tend to cause the degradation of product usability. This problem is mainly due to the small hardware user interface of mobile phone. That is, because many functions must be operated in small hardware interface, the principle of one-to-one mapping between a function and a control is disregarded in design, often. In order to resolve this problem, users' characteristics must be considered in the user interface design of mobile phone. So, users' basic characteristics that must be considered in the user interface design of mobile phone were studied through two experiments, questionnaire survey and user testing.

• The KIPS Transactions:PartC
• /
• v.11C no.4
• /
• pp.463-470
• /
• 2004

ASN.1/GDMO is the management object used in network management of TMN(Telecommunication Management of Network). However, ASN.1/GDMO is not directly used for managing the network, but translated Into a language with object-oriented paradigm. Therefore we need a development environment for handling ASN.1/GDMO. In this paper we present an integrated development environment(IDE) which consists of an editor and a browser. A user manages ASN.1/GDMO elements with GUI. The IDE is implemented with FLEX and BYACC in UNIX. And Objectivity DB is used as the DB and Tcl/Tk is used for developing GUI. This paper shows how the integrated environment of ASN.1 and GDMO works, and that it enables to manage efficiently the network.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.6
• /
• pp.93-99
• /
• 2017

In this research the TOF (time of flight) of ultrasonic signal is measured using Xilinx's Zynq SoC (system on chip). The TOF is calculated from the difference between periods during which RF (radio frequency) and ultrasonic signals come across a distance, and then travelling distance is obtained by multiplying the TOF by the ultrasonic speed in the air. For this purpose, a ultrasonic pulse is generated from a Zynq's internal ADC, a FIR (finite impulse response) filter, and a Kalman filter. And a RF reference pulse is generated from a RF interface. Based on baremetal multiprocessing, the Kalman filter and the RF interface are c-programmed on Zynq's dual processor cores, with other components fabricated on Zynq's FPGA. With this HW/SW co-design, both lower resource utilization and much smaller designing period were obtained than the HW design. As a design tool, Vivado IDE(integrated design environment) is used to design the whole signal processing system in hierarchical block diagrams.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.324-327
• /
• 2000

In this paper, the effects of negative and positive bias stress on p-channel poly-Si TFT's fabricated by excimer laser annealing have been investigated After positive and negative bias stress, transcon-ductance(g$_{m}$) is increased because of a reduction of the effective channel length due to the injected electron in the gate oxide. In the positive bias stress, the injection of hole is appeared after stress time of 3600sec and g$_{m}$ is decreased. On the other hand, the gate voltage at the maximum g$_{m}$, S-swing and threshold voltage(V$_{th}$) are decreased because of the interface state generation due to the injection of electrons into the gate oxide.e.ide.e.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.6
• /
• pp.231-237
• /
• 2004

Current paper introduces the multimedia functional module and related interface development for digital TV. The module is developed for displaying the image captured by digital still camera, camcorder, or PC in the digital TV. For these purposes, the module has the interface circuit for accessing five media type of memory cards. It decodes JPEG, BMP, or TIFF image date saved in the memory card and converts the image data to analog RGB signal. It also supports three types of output image size from HD(High Definition) to WXGA(Wide Extended Graphics Array) resolution. So the introduced module could be adopted in all kinds of digital TV set.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.27-28
• /
• 2007

In this paper, the Wireless Sensor Network (WSN) based on ZigBee technology was devised and developed. Wireless communication was applied to petrochemical domain, like other industries. And sensor network of IEEE 802.15.4 protocol stack diagram was described. Then, by analyzing the protocol, the software systems included the communication Protocol and point-to-point network were implemented with Freescale Semiconductor's product MC13192-SARD DSK board. After that, the performance of this design system was evaluated, and finally, by using PC Graphic User Interface (GUI) and IDE CW08 V3.1 programming tool, the real time communication data and the curve function were displayed.

• The Journal of Society for e-Business Studies
• /
• v.1 no.1
• /
• pp.93-116
• /
• 1996

This study aims to develop an approach to construct IWSDB for National Defense CALS. Along with the introduction of Korean version of CALS conception, it is essential to analyze the national defense system with a new information technology for the construction of IWSDB. A long-tenn goal of CALS is to construct fully Integrated Data Environment (IDE) and establish IWSDB for the application of CALS conception to the life cycle management of weapon system. IWSDB is a set of databases that contain digital data. It supports common interface of data objects and databases throughout the life cycle management of weapon system, including design, engineering, analysis, manufacturing, operation, and logistics. etc. The goal of this study is threefold. First, we propose a right direction for the establishment of Integrated Data Environment. For the integrated database technology, we use the five schema architecture and the distributed object oriented technology that will lead to the "share of data." Second, we present the most effective IWSDB architecture for defense CALS, which will provide the efficient data sharing by business process modeling. Third, we suggest that IWSDB should be constructed based on the process which is related to the acquisition and logistics of weapon system for the national defense, and at the same time it should be implemented with GITIS for government agencies and CITIS for the industries in order to obtain the efficient data sharing.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.02a
• /
• pp.245-256
• /
• 2004

The extraction of three kinds of amido podands, N,N,N'N'-tetrabutyl-3-oxa-pentanedi- amide (TBDGA), N,N,N'N'-tetra-isobutyl-3-oxa-pentanediamide(TiBDGA) and N,N,N'N'-tetra- butyl-3,6-dioxa-oct-anediam- ide(TBDOODA) on U(VI),Pu(IV), Am(III), Eu(III) and other metal ions is studied in nitric acid solutions. 40%octanol-kerosene is chosen as diluents to eliminate third phase and emulsion. TBDGA and TiBDGA show extraction selectivity to An(III) and Ln(III) much higher than to U(VI) and Pu(IV). Fe, Ru and Mo is poorly extracted by the three kinds of amid podands in 2~3mol/L $HNO_3$ solutions. Aiming to eliminate interface crude when using simulated HLLW solution in the system of 0.2mol/L TBDGA/Octanol＋kerosene, acetohydroxyamic acid was adapted. Distribution ratio of zirconium was decreased when adding acetohydroxyamic acid in aqueous solution, and interface crude disappeared as mixing extractant with HLLW. The counter-current extraction test is carried out in a set of miniature mixer-settler, with 0.2mol/L TBDGA/ 40% octanol-kerosene as extractant to separate U(VI), Pu(IV), Am(III) and Eu(III) from simulated high level liquid waste(HLLW) solution. In battery A, lanthanides and actinides are coextracted into organic phase with the recovery of 99.98% for U(Ⅵ), >99.99% for Pu(IV), and >99.99% for Am(III) and Eu(III) respectively. In battery R1, 99.99% U, 86.2% Pu and a part of Am or Eu are stripped into aqueous phase by 0.2mol/L acetohydroxyamic acid (AHA) in 0.01mol/L $HNO_3$ solution. In battery $R_2$, Am, Eu and remained Pu are completely back-extracted by 0.2mol/L AHA. This separation process contains no salt reagent, and it is not necessary to dilute HLLW feed.