• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.1
• /
• pp.1-17
• /
• 2002

The purpose of this study is to examine the possibility of thermal injury to bone tissues during an implant site preparation under the same condition as a typical clinical practice of $Br{\aa}nemark$ implant system. All the burs for $Br{\aa}nemark$ implant system were studied except the round bur The experiments involved 880 drilling cases : 50 cases for each of the 5 steps of NP, 5 steps of RP, and 7 steps of WP, all including srew tap, and 30 cases of 2mm twist drill. For precision drilling, a precision handpiece restraining system was developed (Eungyong Machinery Co., Korea). The system kept the drill parallel to the drilling path and allowed horizontal adjustment of the drill with as little as $1{\mu}m$ increment. The thermocouple insertion hole. that is 0.9mm in diameter and 8mm in depth, was prepared 0.2mm away from the tapping bur the last drilling step. The temperatures due to countersink, pilot drill, and other drills were measured at the surface of the bone, at the depths of 4mm and 8mm respectively. Countersink drilling temperature was measured by attaching the tip of a thermocouple at the rim of the countersink. To assure temperature measurement at the desired depths, 'bent-thermocouples' with their tips of 4 and 8mm bent at $120^{\circ}$ were used. The profiles of temperature variation were recorded continuously at one second interval using a thermometer with memory function (Fluke Co. U.S.A.) and 0.7mm thermocouples (Omega Co., U.S.A.). To simulate typical clinical conditions, 35mm square samples of bovine scapular bone were utilized. The samples were approximately 20mm thick with the cortical thickness on the drilling side ranging from 1 to 2mm. A sample was placed in a container of saline solution so that its lower half is submerged into the solution and the upper half exposed to the room air, which averaged $24.9^{\circ}C$. The temperature of the saline solution was maintained at $36.5^{\circ}C$ using an electric heater (J. O Tech Co., Korea). This experimental condition was similar to that of a patient s opened mouth. The study revealed that a 2mm twist drill required greatest attention. As a guide drill, a twist drill is required to bore through a 'virgin bone,' rather than merely enlarging an already drilled hole as is the case with other drills. This typically generates greater amount of heat. Furthermore, one tends to apply a greater pressure to overcome drilling difficulty, thus producing even greater amount heat. 150 experiments were conducted for 2mm twist drill. For 140 cases, drill pressure of 750g was sufficient, and 10 cases required additional 500 or 100g of drilling pressure. In case of the former. 3 of the 140 cases produced the temperature greater than $47^{\circ}C$, the threshold temperature of degeneration of bone tissue (1983. Eriksson et al.) which is also the reference temperature in this study. In each of the 10 cases requiring extra pressure, the temperature exceeded the reference temperature. More significantly, a surge of heat was observed in each of these cases This observations led to addtional 20 drilling experiments on dense bones. For 10 of these cases, the pressure of 1,250g was applied. For the other 10, 1.750g were applied. In each of these cases, it was also observed that the temperature rose abruptly far above the thresh old temperature of $47^{\circ}C$, sometimes even to 70 or $80^{\circ}C$. It was also observed that the increased drilling pressure influenced the shortening of drilling time more than the rise of drilling temperature. This suggests the desirability of clinically reconsidering application of extra pressures to prevent possible injury to bone tissues. An analysis of these two extra pressure groups of 1,250g and 1,750g revealed that the t-statistics for reduced amount of drilling time due to extra pressure and increased peak temperature due to the same were 10.80 and 2.08 respectively suggesting that drilling time was more influenced than temperature. All the subsequent drillings after the drilling with a 2mm twist drill did not produce excessive heat, i.e. the heat generation is at the same or below the body temperature level. Some of screw tap, pilot, and countersink showed negative correlation coefficients between the generated heat and the drilling time. indicating the more the drilling time, the lower the temperature. The study also revealed that the drilling time was increased as a function of frequency of the use of the drill. Under the drilling pressure of 750g, it was revealed that the drilling time for an old twist drill that has already drilled 40 times was 4.5 times longer than a new drill The measurement was taken for the first 10 drillings of a new drill and 10 drillings of an old drill that has already been used for 40 drillings. 'Test Statistics' of small samples t-test was 3.49, confirming that the used twist drills require longer drilling time than new ones. On the other hand, it was revealed that there was no significant difference in drilling temperature between the new drill and the old twist drill. Finally, the following conclusions were reached from this study : 1 Used drilling bur causes almost no change in drilling temperature but increase in drilling time through 50 drillings under the manufacturer-recommended cooling conditions and the drilling pressure of 750g. 2. The heat that is generated through drilling mattered only in the case of 2mm twist drills, the first drill to be used in bone drilling process for all the other drills there is no significant problem. 3. If the drilling pressure is increased when a 2mm twist drill reaches a dense bone, the temperature rises abruptly even under the manufacturer-recommended cooling conditions. 4. Drilling heat was the highest at the final moment of the drilling process.

• Journal of Mushroom
• /
• v.18 no.1
• /
• pp.20-28
• /
• 2020

This study was conducted to determine the antioxidant, nitrite scavenging, melanin tyrosinase inhibitory, and melanogenesis inhibitory activities of fermented Coix lacryma-jobi L. var. mayuen Stapf. by Hericium erinaceum (Bull.: Fr.) mycelial hot water extract (FCLHE). Additionally, we analyzed β-glucan and ergosterol contents in FCLHE and C. lacryma-jobi hot water extract (CLHE). The ergosterol and β-glucan contents in FCLHE were 740.2 mg% and 245.3 mg%, respectively, whereas these components were not detected in CLHE. FCLHE showed higher cell viability than CLHE. When B16F10 cells were treated with 500 ㎍/mL each of CLHE and FCLHE, the FCLHE treated cells produced 8.9 uM nitric oxide (NO), which was lower than that produced by CLHE treated cells (10.6 uM). The FCLHE treated cells showed significantly greater tyrosinase inhibition and melanin production at all tested concentrations than when compared to the CLHE treated group. Antioxidant parameters such as DPPH and ABTS radical scavenging activities were higher in FCLHE than in CLHE. These results suggest that FCLHE can be used as a raw material for functional foods, for food additives, and in the cosmetic industry.

• Journal of Korean Philosophical Society
• /
• v.123
• /
• pp.347-377
• /
• 2012

We have numerous terms representing mind. We can understand them largely as the relationship of 'Discernible Mind' and 'Indiscernible Mind.' Because, our understanding mind is formed by linguistic discernment. When any discernment arise from our mind, we recognize the mind shown by discernment[Discernible Mind]. At the same time, we can think orignal mind[Indiscernible Mind] outside that discernment. Buddhism, generally, has understood mind in the relation with everything. That is to say, they have understood it from the perspective of dependent co-arising. In the early Buddhism and the abhidharma Buddhism, approaches to mind were mainly made by the discerning method. They explained arising and vanishing of 'Discernible Mind' by the law of dependent arising. Co-arisen 'Discernible Mind' is impermanent and temporary. But they never be denied on 'Discernible Mind' as an vainness. In $Mah{\bar{a}}y{\bar{a}}na$ Buddhism, $N{\bar{a}}garjuna$ understood the essence of dependent arising as the ${\acute{s}}{\bar{u}}nyata$ (emptiness) and the law of dependent arising as simultaneous dependence, not gradual dependences. $N{\bar{a}}garjuna$ criticized on vainness of Discernible Mind through ${\acute{s}}{\bar{u}}nyata$, and made possible to directly perceive Indiscernible Mind, before Discernment. Undiscriminating Mind can not be explained for being stayed beyond the state linguistic discernment(false discrimination), however, had been approached from various other names to potential consciousness or original nature. While ${\acute{s}}{\bar{u}}nata$ thought focused on criticizing vainness of discernment, Hwaeum thought suggested aspect of Indiscernible mind from the aspect of $ekay{\bar{a}}na$ dependant co-arising that everything has been co-arisen, the truth of discrimination. Furthermore, it opened the path to affirm the both indiscernible mind and discernible mind by illuminating that everything is manifestation of original nature itself, i.e. nature-arising. Hwaeum thought focused on perfect understanding by explicating the relation both indiscernible mind and discernible mind from the view point of non-abiding, rather than clarifying 'Discernible Mind' and 'Indiscernible Mind', itself. That is to say, from the aspect of dependant co-arising, Hwaeum thought plays a role that enters the indiscernible world from discernible world, and also, another role, from the aspect of nature-arising that is manifesting discernible world from indiscernible world. These aspects are important for righteous understanding on mind, and also simultaneously, very effective for healing disease of obsession, a kind of metal disease.

• Journal of dental hygiene science
• /
• v.9 no.2
• /
• pp.169-179
• /
• 2009

This study aims to present a fundamental data base to figure out the mental and the physical conditions that the dental technicians are facing and ultimately to develop a health care program to deal with their health related problems. To this end, we took an analysis on the health status among the subjects of 895 dental technicians currently working at the dental lab around the nation from January 15 to March 31, 2009 by way or Todai Health Index(THI). Of the average scale point in accordance with 12 scale scores of the physical and the mental subjective symptom, the results revealed that the physical appeals (21.10) were higher than the mental appeals (18.49) and the multiple subjective symptom was marked as 38.44 followed by the mental irritability (25.92). In gender differences, the females proved to be higher than the males in both physical appeals and mental appeals while the physical appeals were dominant in both genders. The physical appeals were higher than the mental appeals with regard to the general characteristics. In the case or the group or age twenties as shown in the physical and mental average scale point, the other groups showed 21.55% of the physical appeals among the married whereas the mental appeals showed the highest point as 18.70 in the unmarried group. In job position, the other groups marked the highest, in working condition, below average group marked the highest, in frequency of break time, none group marked the highest. We drew a conclusion form this study that the dental technicians gained the higher points in the item or the multiple subjective symptom, the menial irritability, and the irregular life. More research on th is phenomena should be followed along with the development of various and practical health care programs to promote the health or dental technicians.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.11 no.2
• /
• pp.61-71
• /
• 2009

Most deciduous trees in temperate zone are dormant during the winter to overcome cold and dry environment. Dormancy of deciduous fruit trees is usually separated into a period of rest by physiological conditions and a period of quiescence by unfavorable environmental conditions. Inconsistent and fewer budburst in pear orchards has been reported recently in South Korea and Japan and the insufficient chilling due to warmer winters is suspected to play a role. An accurate prediction of the flowering time under the climate change scenarios may be critical to the planning of adaptation strategy for the pear industry in the future. However, existing methods for the prediction of budburst depend on the spring temperature, neglecting potential effects of warmer winters on the rest release and subsequent budburst. We adapted a dormancy clock model which uses daily temperature data to calculate the thermal time for simulating winter phenology of deciduous trees and tested the feasibility of this model in predicting budburst and flowering of Niitaka pear, one of the favorite cultivars in Korea. In order to derive the model parameter values suitable for Niitaka, the mean time for the rest release was estimated by observing budburst of field collected twigs in a controlled environment. The thermal time (in chill-days) was calculated and accumulated by a predefined temperature range from fall harvest until the chilling requirement (maximum accumulated chill-days in a negative number) is met. The chilling requirement is then offset by anti-chill days (in positive numbers) until the accumulated chill-days become null, which is assumed to be the budburst date. Calculations were repeated with arbitrary threshold temperatures from $4^{\circ}C$ to $10^{\circ}C$ (at an interval of 0.1), and a set of threshold temperature and chilling requirement was selected when the estimated budburst date coincides with the field observation. A heating requirement (in accumulation of anti-chill days since budburst) for flowering was also determined from an experiment based on historical observations. The dormancy clock model optimized with the selected parameter values was used to predict flowering of Niitaka pear grown in Suwon for the recent 9 years. The predicted dates for full bloom were within the range of the observed dates with 1.9 days of root mean square error.

• The Korean Journal of Air & Space Law and Policy
• /
• v.27 no.1
• /
• pp.29-73
• /
• 2012

Aviation safety is the State and industry's top priority and more scientific approaches for fatigue management should be needed. There are lately various studies and regulation changes for crew fatigue management with ICAO, FAA and EASA. ICAO issued the provisions of fatigue management for flight crew since 1st edition, 1969, of Annex 6 operation of aircraft as a Standards and Recommended practice(SARPs). Unfortunately, there have been few changes and improvement to fatigue management provisions since the time they were first introduced. However the SARPs have been big changed lately. ICAO published guidance materials for development of prescriptive fatigue regulations through amendment 33A of Annex 6 Part 1 as applicable November 19th 2009. And then ICAO introduced additional amendment for using Fatigue Risk Management System (FRMS) with $35^{th}$ amendment in 2011. According to the Annex 6, the State of the operator shall establish a) regulations for flight time, flight duty period, duty period and rest period limitations and b) FRMS regulations. The Operator shall implement one of following 3 provisions a) flight time, flight duty period, duty period and rest period limitations within the prescriptive fatigue management regulations established by the State of the Operator; or b) a FRMS; or c) a combination of a) and b). U.S. FAA recently published several kinds of Advisory Circular about flightcrew fatigue. U.S. passed "Airline Safety and FAA Extension Act of 2010" into law on August 1st, 2010. This mandates all commercial air carriers to develop a FAA-acceptable Fatigue Risk Management Plan(FRMP) by October 31st, 2010. Also, on May 16, 2012, the FAA published a final rule(correction) entitled 'Flightcrew Member Duty and Rest Requirements; correction to amend its existing prescriptive regulations. The new requirements are required to implement same regulations for domestic, flag and supplemental operations from January 4, 2014. EASA introduced a Notice of Proposed Amendment (NPA) 2010-14 entitled "Draft opinion of the European Aviation Safety Agency for a Commission Regulation establishing the implementing rules on Flight and Duty Time Limitations and Rest Requirements for Commercial Air Transport with aeroplanes" on December 10, 2010. The purpose of this NPA is to develop and implement fatigue management for commercial air transport operations. Comparing with Korean and foreign regulations regarding fatigue management, the provisions of ICAO, FAA, EASA are more considering various fatigue factors and conditions. Korea regulations should be needed for some development of insufficiency points. In this thesis, I present the results of the comparative study between domestic and foreign regulations in respect of fatigue management crew member. Also, I suggest legal proposals for amendment of Korea Aviation act and Enforcement Regulations concerning fatigue management for crew members. I hope that this paper is helpful to change korea fatigue regulations, to enhance aviation safety, and to reduce the number of accidents relating to fatigue. Fatigue should be managed at all level such as regulators, experts, operators and pilots. Authority should change surveillance mind-set from regulatory auditor to expert adviser. Operators should identify various fatigue factors and consider to crew scheduling them. Crews should strongly manage both individual and duty-oriented fatigue issues.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.4 no.2
• /
• pp.187-203
• /
• 1998

The purpose of this study was to identify the correlation between burden and teaching effectiveness on clinical nursing practice. The subjects were collected 135 clinical nurses who have taught nursing students and worked at hospitals which have over 400 beds in Seoul, Inchon, and Kyoung-gi Do. The instruments used in this study were : the burden on clinical nursing education was measured by Montgomery (1985) developed and visual analogue scale, and effectiveness of clinical instruction was measured by Reeve (1994) developed. The results of this study were as follows. 1) Seeing that the general characteristics of participants : average ages we 32.8 years old, 29.6% of them have Catholics in religions. 75.6% of them were graduated from 3-year nursing college. 20.7% of nurses are working at the surgery ward and I.C.U in each. Clinical nursing career is average 10.03 years, clinical instructional career is 5.22 years, and clinical teaching time is 5.26 hours in a day. Contents of clinical teaching were composed of basic nursing skills 80.7%, orientation 78.5%, inspection(making rounds) 71.9%. 2) The mean score of the burden on clinical nursing instructor was 2.42 by Montgomery's scale and 4.69 by the visual analogue scale. Theses scores represented that subjects were not affected burden highly. The mean score of leaching effectiveness on clinical nursing education was 3.47 and the almost items were found to have higher level. 3) There is no statistically significant differences in the burden according to general characteristics. And the teaching effective ness on clinical nursing education according to general characteristics regarding the age, job position, clinical career and clinical educational time were shown statistically significant differences. 4) There is a negative correlation between the burden and teachin effectiveness on clinical nursing education with a correlation efficient(r=-0.396, p<0.01). Further study is recommended to explore the meaning of burden experiences of clinical instructor deeply and to identify the correlation between the burden of clinical instructor and teaching effectiveness as the job position, and to analysis differences in teaching effectiveness as subcategories.

• Journal of the Korean Magnetics Society
• /
• v.2 no.3
• /
• pp.233-238
• /
• 1992

Melt-spun $Nd_{14}Fe_{76}Co_4B_6$ and $Nd_{10.5}Fe_{79}Co_2Zr_{1.5}B_7$ ribbons were prepared under an externally applied magnetic field. Magnetic properties in terms of anisotropy were evaluated by discussing the effect of textured structure of the ribbon samples as well as its powders. About 32 % increase in $(B{\cdot}H)_{max}$ and 18.8 % increase in $B_r$ were observed along the perpendicular direction of the ribbon plane which is more prominent for the Nd-Fe-Co-Zr-B than for the Nd-Fe-Co-B alloy. The enhancement of magnetic anisotropy was monitored by measuring the anisotropy constant of each alloy as a function of quenching rate of the ribbon. It was found that for the melt-spun ribbon quenched at slow rate(less than 7 m/s) the magnetic field effect was overwhelmed by the heat gradient effect through the ribbon thickness while the field effect was prominent at intermediate quenching rate (more than 7~11 m/s). The reproducible maximum energy product, $(B{\cdot}H)_{max}$=16.4 MGOe can be obtained from the Nd-Fe-Co-Zr-B alloy.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.1
• /
• pp.144-158
• /
• 2014

This research presented a conceptual design of damage assessment inventory for efficient response to natural disaster damage of infrastructure close to the river. It consists of classification and categorization of facilities for accomplishing the conceptual design of inventory for damage of infrastructure close to the river. However, there are arising problems of efficient management on disaster, such as poor management of data facilities and constructions which is managed by the different types of government departments. Therefore, this research presented conceptual models of damage assessment inventory on risks of damage infrastructure close to the river using the United states' HAZUS-MH to analyze damage facilities, type of asset classification, classification of domestic facilities and guidelines for computing the value of assets. Conceptual models of inventory this research presented is to be used on the data for damage response on protected inland damage assessment and to increase efficiency for evaluating detailed damage amount of private property by natural disaster and to establish a restoration plan.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.1
• /
• pp.118-129
• /
• 2011

This Study has developed the information system of the rivers based on 3D image GIS by converging the latest information technology of GIS(Geographic Information System), RS(Remote Sensing), GNSS(Global Navigation Satellite System), aerial laser survey(LiDAR) with real time network technology in order to understand the current situation of all the four major rivers and support the administrative management system. The said information system acquires the high resolution aerial photographs of 25cm, aerial laser survey and water depth surveying data to express precise space information on the whole Youngsan River which is the leading project site out of the four river sites. Monitoring the site is made available on the transporting means such as a helicopter, boat or a bus in connection with locational coordinate tracking skill for the moving objects in real time using GNSS. It makes monitoring all the information on the four river job sites available at a glance, which can obtain the reliability of the people to such vast areas along with enhancing the recognition of the people by publicity of four Rivers Revitalizing Project and reports thereof.