• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.525-528
• /
• 2002

The objective of this study is to investigate characteristics of flow by the Rod shape and the choice of the turbulent intensity enhancement section. The Rod was setup vertically to the way of a nozzle exit flow and nozzle diameter is 17mm. Rod height is 5mm and its shapes are square, triangle, and circle. Characteristics of fluid such as velocity vector distribution, kinetic energy, turbulent intensity, and etc. were visualized, observed, and considered at 3 kinds of Re No. such as 2000, 3000, and 4000. The characteristics of flow field were investigated in each case of the distance rate from the nozzle exit to impinging plate(H/B=8, 10). The temperature of water is $20^{\circ}E$ and the measurement region divided by 3 sections(I, II, III). The nozzle diameter is 17mm. As the experimental result by PIV measurement, scale of the vector profile showed a tendency to an unbalance parabola distribution as increasing of the Re No. When the impinging plates such as square, triangle, and circle shape are installed respectively in front of the flow accelerated, rod shape of the highest velocity vector is circle shape and rod shape of the highest turbulent Intensity is square shape.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.257-265
• /
• 2009

The present study deals with the leading edge shape on a wing-body junction to decrease a horseshoe vortex, one of the main factors to generate the secondary flow losses. The shape of leading-edge is optimized with design variables form the leading-edge shape. Approximate optimization design method is used for the optimization. The study is investigated using $FLUENT^{TM}$ and $iSIGHT^{TM}$. As the result, total pressure coefficient of the optimized design case was decreased about 9.79% compare to the baseline case.

• Computational Structural Engineering
• /
• v.6 no.3
• /
• pp.89-97
• /
• 1993

General formulation to analyse the rectangular thin plate on a soil medium by energy method is developed. In the problem, Boussinesque's formular needs to be integrated after assuming the contact stress distribution. Two different functions, i.e., power series and Chebychev polynomials are used to approximate the contact stress distribution. It was found that Chebychev polynomials are better function to describe the contact stress than power series. Chebychev polynomials considering stress singularity around plate boundary is recommended as the desirable shape function for future research.

• Journal of Apiculture
• /
• v.33 no.4
• /
• pp.227-237
• /
• 2018

The majority parasitic bee mites of Thailand in genus Tropilaelaps are infesting colonies of native bees (Apis dorsata) and introduced bees (A. mellifera). The investigation aims to study morphological and genetic variation of Tropilaelaps mites infected different hosts. Adult mites were collected from honey bee brood throughout Thailand. Traditional and geometrical morphometrics were measured on photograph by using TPS program. Additional, COI gene variations were examined by PCR-RFLP and nucleotides sequencing. Tree of mites relationships were constructed by NJ and MP assumptions. Morphometric results indicated T. mercedesae were major species infesting on A. dorsata and A. mellifera. Mophological variation represented at anal and epigynial plate, which the shape of the anal plate apex margin has been key character to identify between T. mercedesae (bell to blunt shape) and T. koenigerum (pear shape). However, the discriminant analysis suggested that geometric results were potential to classify Thai Tropilaelaps populations from different hosts better than traditional morphometric. Otherwise, PCR-RFLP clearly detected the site of Dra I and Xba I digestion of Thai Tropilaelaps morphotypes. The COI sequences of T. koenigerum were founded infesting only A. dorsata in Thailand and four sequences that related to the Thai T. mercedesae morphotypes. The NJ and MP tree were clearly classified Thai Tropilaelaps species which were suggested both from morphological and molecular analysis. This information might be basically of taxonomic status, but this should have implication for controlling these mites in Thailand and other countries.

• Transactions of Materials Processing
• /
• v.22 no.1
• /
• pp.5-10
• /
• 2013

Steel plates are widely used in many manufacturing areas such as ship and bridge construction industries and are fabricated by different forming processes. Steel plates can have various shape defects, such as curl or camber. Roller leveling reduces the magnitude of the residual stress by using small amounts of reverse bending via an appropriate arrangement of the rolls and the associated plastic deformation in the steel plate. In this study a model for the residual stress after roller leveling is developed. In order to simplify the formulation, a plane-strain condition is assumed and the stress in the thickness direction is assumed to be negligible. The camber deformation in a real sized plate are measured and compared with the prediction values from the model to validate the accuracy of the model.

• Steel and Composite Structures
• /
• v.26 no.3
• /
• pp.329-345
• /
• 2018

This paper systematically investigated the mechanical performance of the weak-axis cover-plate connection, including a beam end monotonic loading test and a column top cyclic loading test, and a series of parametric studies for exterior and interior joints under cyclic loading using a nonlinear finite element analysis program ABAQUS, focusing on the influences of the shape of top cover-plate, the length and thickness of the cover-plate, the thickness of the skin plate, and the steel material grade. Results showed that the strains at both edges of the beam flange were greater than the middle's, thus it is necessary to take some technical methods to ensure the construction quality of the beam flange groove weld. The plastic rotation of the exterior joint can satisfy the requirement of FEMA-267 (1995) of 0.03 rad, while only one side connection of interior joint satisfied ANSI/AISC 341-10 under the column top cyclic loading. Changing the shape or the thickness or the length of the cover-plate did not significantly affect the mechanical behaviors of frame joints no matter in exterior joints or interior joints. The length and thickness of the cover-plate recommended by FEMA 267 (1995) is also suitable to the weak-axis cover-plate joint. The minimum skin plate thickness and a design procedure for the weak-axis cover-plate connections were proposed finally.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.4
• /
• pp.254-261
• /
• 2005

The purpose of this research is to develop a method for cutting non-circular holes on a bent thick plate. Generally in order to cut the holes on the large plates, a special-purpose 5-axis machine is needed. However, such a machine is unavailable in most of the machine shops. This paper provides a description of such a method that utilizes a general-purpose 5-axis water-jet machine in place of the special-purpose machine: First, the bent piece is transformed into a flat plate, where the shape of the holes is reconstructed by considering deformation during bending. Then, after a 5-axis NC data is generated, the holes on the flat plate are cut using the 5-axis water-jet machine. The final step is to return to its, original shape by bending the plate with its newly-cut holes. The proposed methodology is implemented as a dedicated system by customizing a commercial CAD/CAM system. Some illustrations are provided throughout the paper in order to show the validity of the proposed methods and the developed system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.349-352
• /
• 2008

In this study, a design method of developed shape for double-curved pressure vessel segment heads was proposed in consideration of in-plane strain induced by forming works. In order to obtain the developed shape of double-curved plate, at first, the segments are subdivided into elements and then they are stacked into a series of strips producing the outline of the approximately developed shape. The developed shape was determined by imposing the in-plane displacement obtained from forming analysis and regression analysis on the outline of the approximately developed shape. The validation of the proposed design method was verified by applying it to the actual products.

• Tribology and Lubricants
• /
• v.15 no.3
• /
• pp.265-271
• /
• 1999

Wherever there are rotating equipment and contact between surface, there is wear and the generation of wear particles. The particles contained in the lubricating oil carry detailed and important information about the condition monitoring of the machine. This information may be deduced from particle shape, composition, size distribution, and concentration. Therefore, This paper was undertaken to Ferrography system of wear debris generated from lubricated moving machine surface. The lubricating wear test was performed under different experimental conditions using the Falex wear test of Pin and V-Block type by Ti(C, N) coated. It was shown from the test results that wear particle concentration (WPC) and wear severity Index( $I_{S}$), size distribution in normal and abnormal wear have come out all the higher value by increases sliding friction time. Wear shape is observed on the Ferrogram it was discovered a thin leaf wear debris as well as ball and plate type wear particles. This kind of large wear shape have an important effect not only metals damage, but also seizure phenomenon.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.6
• /
• pp.24-33
• /
• 2009

The present study deals with the optimization of the leading edge shape around a wing-body junction to minimize the strength of the horseshoe vortex, which is one of the main factor generating the secondary flow losses. For this purpose, approximate optimization method is used for the optimization. The study is performed by using $FLUENT^{TM}$ and $iSIGHT^{TM}$. The total pressure coefficient for the optimized model was decreased about 9.79% compared with the baseline model.