• The Transactions of the Korea Information Processing Society
• /
• v.4 no.2
• /
• pp.552-562
• /
• 1997

This paper proposes a formal method on confromance testing for INAP(AIN) test sequence generation by optimization technique.In order to implement and prove the dffectiveness of the proposed method,we specify the SRSM of INAP protocol SRF in SDL and generate I/O FSM by using our S/W tool. We generate an opti-mal test sequence by applying our method our method to this reference I/O FSM. We prove experimentally that the length of the generated test sequence by our method is more effective and shorter(i.e 32% improved)than the one geverated by UIO method,and estimate that The test coverage space of our test sequence is larger that of UIO method.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.843-850
• /
• 2004

As mobile devices prevail, requests for various services using mobile devices have increased. Requests for application services that require large data space such as multimedia, game and database [1] specifically have greatly increased. However, mobile appliances have difficulty in applying various services like a wire environment, because the storage capacity of one is not enough. Therefore, research (5) which provides remote storage service for mobile appliances using iSCSI is being conducted to overcome storage space limitations in mobile appliances. But, when iSCSI is applied to mobile appliances, iSCSI I/O performance drops rapidly if a iSCSI client moves from the server to a far away position. In the case of write operation, $28\%$ reduction of I/O performance occurred when the latency of network is 64ms. This is because the iSCSI has a structural quality that is very .sensitive to delay time. In this paper, we will introduce an intermediate target server and localize iSCSI target to improve the shortcomings of iSCSI performance dropping sharply as latency increases when mobile appliances recede from a storage server.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.11
• /
• pp.13-21
• /
• 2013

The goal of this paper is to provide performance improvement and stability for satellite data correction of some distortions due to cloud or radiance through distributed processing on cluster. To do this, we proposed and implemented SGE(Sun Grid Engine) based distributed processing methods using local storages and a status table. In the verification, the experiment result revealed that the proposed system on seven nodes improved the processing speed by 138.81% as compare to the existing system and provided good stability as well. This result showed that the proposed distributed processing work is more appropriate to process CPU bound jobs than I/O bound jobs. We expect that the proposed system will give scientists improved analysis performance in various fields and near-real time analysis services.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.105-107
• /
• 2014

대량의 정보를 효과적으로 처리하기 위한 기술로 CPU 뿐만 아니라 iSSD 와 GPGPU 를 개별적으로 이용하는 연구가 진행되고 있다. 본 논문에서는 더 나아가 CPU, iSSD 와 GPU 를 협업시켜 프로그램 수행 성능을 향상시키는 방법을 연구한다. 이러한 이질 시스템의 협업을 위해 이질 스케줄링 알고리즘을 적용하고, 스케줄링 알고리즘에 따른 협업 시스템의 성능을 분석한다.

• Journal of Industrial Technology
• /
• v.40 no.1
• /
• pp.19-23
• /
• 2020

In this paper, we proposed a PC-based CNC control system using EtherCAT-based servo drive and I/O device. The default communication of LinuxCNC is a parallel port, and data processing with high bandwidth is impossible. However, it is possible to apply various bandwidth devices through the application of EtherCAT, one of the industrial Ethernet communications with high bandwidth. Therefore, the hardware control method of LinuxCNC was applied through EtherCAT communication from the existing parallel port. Finally, through HAL configuration, I/O device operation check and 3-axis motion control proved the LinuxCNC system with EtherCAT.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.13-17
• /
• 1997

The densification of $Al_2$O$_3$/15v/o ZrO$_2$ (Zirconia Toughened Alumina: ZTA) to the 99% of theoretical density was attempted by controlling the processing parameters affecting the each processing step i.e., milling, spray-drying, forming and pressureless sintering. The ZTA processed under the identical conditions showed a large variation in the green and sintered densities, and the mechanical properties. The deviation of 4-point bending strength was more than 100MPa for the ZTA with ~99% of theoretical density. Moreover, the relative green and sintered densities were deviated greatly from the average value. This low reproducibility could be caused by the variation of spray-dried granule properties. Thus, the effect of yield strength and morphology of spray-dried ZTA granule on the green and sintered densities and the mechanical properties needs to be studied in detail. The objective of this work is to fine out the optimum condition of compaction pressure and compaction method depending on the properties of spray-dried granules.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1508-1511
• /
• 1997

In this paper, design parameters of Rapid Thermal Processing(RrW) to minimize the wafer tempera ture uniformity errors are proposed. 1,anip ling positions and the wafer height are important parameters for waf er temperature uniformity in R'I'P. We propose the method to seek lamp ling positions and the wafer height for optimal temperature uniformity. l'he ~~roposed method is applied to seek optimal lamp ling positions and the waf er height of 8 inch wafer. 'I'o seek the optimal lamp ling positions and the wafer height, we var\ulcorner. lamp ling 110s itions and the wafer height and then formulate the wafer temperature uniformity problem to the linear programmi ng problem. Finally, it is shown that the wafer temperature uniformity in RI'I' designed by optimal prarneters is improved to comparing with Ii'l'P designed by the other method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.2022-2030
• /
• 2008

System such as FA and breakup TC is applied by real time and need to manage. This paper studies data processing skill that can divide TC and data of much quantity with collection by real time. Modularize to several system, and use of computer communication network that interlink computers that can achieve control function of each systems to network is spreading. Develop that can take advantage of Ideonet communication method and transmit signal of channel because do multiplex all. Do data that have semi-conductor equipment or many input of LCD equipment and output node multiplex, and several units real time Ideonet communication that control is available use that all input of point of contact and output module develop.

• Korean Journal of Materials Research
• /
• v.3 no.4
• /
• pp.381-387
• /
• 1993

The silicon oxynitride bonded $Si_3N_4-BN$ composite has been developed based on the selective oxidation behavier of $Si_3N_4$ over BN. The silicon oxynitride phase converted to the reaction between $Si_3N_4$ and $SiO_2$ formed on $Si_3N_4$ powder surface during oxidation treatment at the sintering temperature. The developed composite has excellent high-temperature strength, thermal shock resistance, precision machinability and corrosion resistance to the molten steel. The developed composite may therefore be used as, for example, break ring materials in continuous casting of steel.

• Journal of Ceramic Processing Research
• /
• v.19 no.5
• /
• pp.372-377
• /
• 2018

MgO or gadolinium-doped ceria (GDC, $Ce_{0.9}Gd_{0.1}O_{2-{\delta}}$) was added as a promoter to improve the oxygen transfer kinetics of $MgMnO_3$ oxygen carrier material for chemical looping combustion. Neither MgO nor GDC reacted with $MgMnO_3$, even at the high temperature of $1100^{\circ}C$. The average oxygen transfer capacities of $MgMnO_3$, 5 wt% $MgO-MgMnO_3$, and 5 wt% $GDC-MgMnO_3$ were 8.74, 8.35, and 8.13 wt%, respectively. Although the addition of MgO or GDC decreased the oxygen transfer capacity, no further degradation was observed during their use in 5 redox cycles. The addition of GDC significantly improved the conversion rate for the reduction reaction of $MgMnO_3$ compared to the use of MgO due to an increase in the surface adsorption process of $CH_4$ via oxygen vacancies formed on the surface of GDC. On the other hand, the conversion rates for the oxidation reaction followed the order 5 wt% $GDC-MgMnO_3$ > 5 wt% $MgO-MgMnO_3$ >> $MgMnO_3$ due to morphological change. MgO or GDC particles suppressed the grain growth of the reduced $MgMnO_3$ (i.e., (Mg,Mn)O) and increased the specific surface area, thereby increasing the number of active reaction sites.