• Korea-Australia Rheology Journal
• /
• 제14권2호
• /
• pp.71-76
• /
• 2002

Metal thin films, which are indispensable constituents of ULSI (Ultra Large Scale Integration) circuits, have been fabricated by physical or chemical methods. However, these methods have a drawback of using expensive high vacuum instruments. In this work, the fabrication of tungsten metal film by spin coating was investigated. First of all, inorganic peroxopolytungstic acid (W-IPA) powder, which is soluble in water, was prepared by dissolving metal tungsten in hydrogen peroxide and by evaporating residual solvent. Then, the solution of W-IPA was mixed with organic solvent, which was spin-coated on wafers. And then, tungsten metal films, were obtained after reduction procedure. By selecting an appropriate organic solvent and irradiating UV, the sheet resistance of the tungsten metal film could be remarkably reduced.

• 한국세라믹학회지
• /
• 제49권6호
• /
• pp.505-510
• /
• 2012

A study of the recovery of tin and nickel from steel ball scraps for barrel plating was carried out through a physical treatment, a leaching treatment, hydrogen reduction and an electrolysis experiment. The recovery of the iron component was over 95% by the physical treatment. We obtained tin oxide in the form of metastannic acid ($SnO_2{\cdot}xH_2O$) with impurities of less than 5% from the leaching treatment. We also recovered the high-purity metallurgical tin at a rate that exceeded 99.9% by the electrolysis of crude tin obtained from the hydrogen reduction of metastannic acid.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.422-423
• /
• 2006

Ultrasonic-milling of metal oxide nanopowders for the preparation of tungsten heavy alloys was investigated. Milling time was selected as a process variable. XRD results of metal oxide nanopowders ultrasonic-milled for 50 and 100h showed that mean crystallite size reduced with increasing milling time and there was no evidence of contamination or change of composition by impurities. It was found that nanocomposite powders reduced at $800^{\circ}C$ in $H_2$ atmosphere had a composition of 93.1W-4.9Ni-2.0Fe by EDX analysis. Hardness of sintered samples of 50 and 100h was 390 and 463 Hv, respectively, which corresponds to the hardness of commercial products.

• Archives of Metallurgy and Materials
• /
• 제63권3호
• /
• pp.1509-1512
• /
• 2018

In this research, we investigated the effects of reduction atmospheres on the creation of the Mo-Si-B intermetallic compounds (IMC) during the heat treatments. For outstanding anti-oxidation and elevated mechanical strength at the ultrahigh temperature, we fabricated the uniformly dispersed IMC powders such as Mo₅SiB₂ (T2) and Mo₃Si (A15) phases using the two steps of chemical reactions. Especially, in the second procedure, we studied the influence of the atmospheres (e.g. vacuum, argon, and hydrogen) on the synthesis of IMCs during the reduction. Furthermore, the newly produced IMCs were observed by SEM, XRD, and EDS to identify the phase of the compounds. We also calculated an amount of IMCs in the reduced powders depending on the atmosphere using the Reitveld refinement method. Consequently, it is found that hydrogen atmosphere was suitable for fabrication of IMC without other IMC phases.

• 한국분말재료학회지
• /
• 제31권4호
• /
• pp.336-341
• /
• 2024

Molybdenum, valued for its high melting point and exceptional physical and chemical properties, is studied in diverse fields such as electronics, petrochemicals, and aviation. Among molybdenum oxides, molybdenum dioxide stands out for its higher electrical conductivity than other transition metal oxides due to its structural characteristics, exhibiting metallic properties. It is applied as pellets to gas sensors, semiconductors, and secondary batteries for its properties. Thus, research on molybdenum dioxide compaction and pressureless sintering is necessary, yet research on pressureless sintering is currently insufficient. This study synthesized MoO₃ powder via solution combustion synthesis and reduced it using the 3% hydrogen/argon gas mixture to investigate the effect of reduction temperature on the powder. Additionally, the reduced powder was compacted and subjected to pressureless sintering with temperature as a variable. The density and the microstructure of brown parts were analyzed and discussed.

• 한국생물물리학회:학술대회논문집
• /
• 한국생물물리학회 1998년도 학술발표회
• /
• pp.33-33
• /
• 1998

Oxidation and reduction of amino acid residues in proteins affect their functional properties. Especially, redox modulation of ion channel activities has been reported in number of ion channel proteins. In this study, we investigated the effects of tertiary-butyl hydrogen peroxide (tBHP) on the large-conductance Ca$\^$2＋/ -activated K$\^$+/(Maxi-K) channel of rat brain using lipid bilayer reconstitution technique.(omitted)

• 전기의세계
• /
• 제22권2호
• /
• pp.11-18
• /
• 1973

This paper reports some results of Si and SiO$_{2}$ films obtained from the expitaxial growth by hydrogen reduction of SiCI$_{4}$ with a hydrogen and carbon dioxide mixture in an epitaxial-deposition chamber. The deposited Si and SiO$_{2}$ are studied by observing the process parameters affecting the rate of deposition, and the quantitative properties at the interface of Si and SiO$_{2}$ are also considered briefly according to the results of the optical absorption and the voltage-current characteristic of MOS etc. using step etching procedure for oxide films.

• 한국세라믹학회지
• /
• 제20권4호
• /
• pp.356-360
• /
• 1983

The photocurrent vs. potential characteristics of the $TiO_2$ ceramic electrodes have been investigated as functions of numerous variables including sample purity hydrogen reduction condition and pH of the electrolyte. The difference inphotoresponse between 99.99% and 98.5% $TiO_2$ electrodes was due to electron trapping effect. As the hydrogen reducing temperature of $TiO_2$ electrodes were increased the photocurrent was also increased to certain condition and then decreased. These results can be explained by the behavior of oxygen vacancies.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2001년도 추계학술강연 및 발표대회
• /
• pp.15-15
• /
• 2001

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.39-39
• /
• 2000