• Journal of Microbiology
• /
• v.38 no.2
• /
• pp.99-104
• /
• 2000

Hydrogen peroxide has been used in cleaning the piping of an advanced high-purity water system that supplies ultra-high purity water (UHPW) for 16 megabyte DRAM semiconductor manufacturing. The level of hydrogen peroxide-resistant bacteria in UHPW water was monitored prior to and after disinfecting the piping with hydrogen peroxide. Most of the bacteria isolated after hydrogen peroxide disinfection were highly resistant to hydrogen peroxide. However, the percentage of resistant bacteria decreased with time. The hydrogen peroxide-resistant bacteria were identified as Micrococcus luteus, Bacillus cereus, Alcaligenes latus, Xanthomonas sp. and Flavobacterium indologenes. The susceptibility of the bacteria to hydrogen peroxide was tested as either planktonic cells or attached cells on glass. Attached bacteria as the biofilm on glass exhibited increased hydrogen peroxide resistnace, with the resistance increasing with respect to the age of the biofilm regrowth on piping after hydrogen peroxide treatment. In order to optimize the cleaning strategy for piping of the high-purity water system, the disinfecting effect of hydrogen preoxide and peracetic acid on the bacteria was evaluated. The combined use of hydrogen peroxide and peracetic acid was very effective in killing attached bacteria as well as planktonic bacteria.

• Journal of Dairy Science and Biotechnology
• /
• v.22 no.2
• /
• pp.107-112
• /
• 2004

Studies on the resistance of Lactobacillus ssp., Bifidobacterium spp. and Bacillus coagulans to hydrogen peroxide were conducted by determination of the viable cells after the test cells in 2mM hydrogen peroxide solution for a predetermined time; L. acidophilus CU4111 and L. casei CU4114 were most resistant to the hydrogen peroxide among the fifteen test lactobacilli strains, whereas L. brevis Cu4206 was the strain which was the most susceptible to hydrogen peroxide. Bifidobacterium longum Cu4131 was one of the resistant strains. A prominant tendency found out that Bacillus coagulans possessed a strong resistance to hydrogen peroxide. The results of level of hydrogen peroxide determination in the cell extracts showed all the test strains contained hydrogen peroxide in the cytoplasm, the amount varied depending on the strain and species of lactic acid bacteria. Bifidobacterium bifidum CU 4134 and L. casei CU 4114 were potent hydrogen peroxide producer strain.

• Journal of Microbiology
• /
• v.44 no.2
• /
• pp.206-216
• /
• 2006

In this study, we have attempted to characterize the functions of YlaC and YlaD encoded by ylaC and ylaD genes in Bacillus subtilis. The GUS reporter gene, driven by the yla operon promoter, was expressed primarily during the late exponential and early stationary phase, and its expression increased as the result of hydrogen peroxide treatment. Northern and Western blot analyses revealed that the level of ylaC transcripts and YlaC increased as the result of challenge with hydrogen peroxide. A YlaC-overexpressing strain evidenced hydrogen peroxide resistance and a three-fold higher peroxidase activity as compared with a deletion mutant. YlaC-overexpressing and YlaD-disrupted strains evidenced higher sporulation rates than were observed in the YlaC-disrupted and YlaD-overexpressing strains. Analyses of the results of native polyacrylamide gel electrophoresis of recombinant YlaC and YlaD indicated that interaction between YlaC and YlaD was regulated by the redox state of YlaD in vitro. Collectively, the results of this study appear to suggest that YlaC regulated by the YlaD redox state, contribute to oxidative stress resistance in B. subtilis.

• Korean Journal of Microbiology
• /
• v.40 no.3
• /
• pp.232-236
• /
• 2004

We investigated hydrogen peroxide resistance of Escherichia coli possessing acetyl xylan esterase(AxeA) of Streptomyces coelicolor A3(2). The induction of AxeA production by isopropyl-$\beta$-thiogalactoside was confirmed by SDS-polyacrylamide gel electrophoresis. The differences in growth between induced and non-induced E. coli were determined by the changes in optical density of cultures after hydrogen peroxide treatment The lethal effect of hydrogen peroxide was observed for non-induced cultures at all concentrations tested in this study (lmM, 2.5mM and 5mM). However, cultures induced for AxeA production resisted the lethal effect, except at 5mM where cells were killed irrespective of the AxeA production. The axeA induction increased survival against 1.5mM hydrogen peroxide from 59% to 74%. In addition, AxeA producing E. coli showed increased survival at $45^{\circ}C$, near maximum growth temperature. Therefore, it was concluded that AxeA conferred a cross-resistance upon the bacterium against both oxidative- and heat stress.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.5
• /
• pp.20-28
• /
• 2012

Blending method was applied to increase the performance of hydrogen peroxide which is called green propellant. 90 wt.% hydrogen peroxide was blended with ethanol which is less toxic fuel, and there was no storability decrease due to fuel addition. Inconel X750 and Tophet A showed good compatibility and high heat resistance, and SUS 316L was compatible. $Al_2O_3$, $Y_2O_3$, and $ZrO_2$, were coated on the material to improve heat resistance, and it was proved from endurance test that $Y_2O_3$ coating is not suitable and adhesive strength between coating and material is related with allowable temperature of material. Thruster test was performed to confirm the performance increase by blending method, and chamber temperature was $870^{\circ}C$ which is higher than $760^{\circ}C$ that is adiabatic chamber temperature of 90 wt.% hydrogen peroxide.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.150-158
• /
• 2011

Blending method was applied to increase the performance of hydrogen peroxide which is called green propellant. 90 wt.% hydrogen peroxide was blended with ethanol which is less toxic fuel, and there was no storability decrease due to fuel addition. Inconel X750 and Tophet A showed good compatibility and high heat resistance, and SUS 316L was compatible. Al2O3, Y2O3, and ZrO2, were coated on the material to improve heat resistance, and it was proved from endurance test that Y2O3 coating is not suitable and adhesive strength between coating and material is related with allowable temperature of material. Thruster test was performed to confirm the performance increase by blending method, and chamber temperature was $870^{\circ}C$ which is higher than $760^{\circ}C$ that is adiabatic chamber temperature of 90 wt.% hydrogen peroxide.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.1
• /
• pp.90-95
• /
• 2005

Lactic acid bacteria were isolated from silage, which produce high level of hydrogen peroxide in cell culture supernatant. The 16S rDNA sequences of the isolate matched perfectly with that of Lactobacillus fermentum (99.9%), examined by a 16S rDNA gene sequence analysis and similarity search using the GenBank database, thus named L. fermentum CS12-1. L. fermentum CS12-1 showed resistance to low pH and bile acid. The production of hydrogen peroxide by L. fermentum CS12-1 was confirmed by catalase treatment and high-performance liquid chromatography. L. fermentum CS12-1 accumulated hydrogen peroxide in culture broth as cells grew, and the highest concentration of hydrogen peroxide reached 3.5 mM at the late stationary growth phase. The cell-free supernatant of L. fermentum CS12-1 both before and after neutralization inhibited the growth of enterotoxigenic Escherichia coli K88 that causes diarrhea in piglets.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.3
• /
• pp.5-16
• /
• 1988

This experiment was executed to investigate the effect of activation of veneer surface by oxidizing agents, hydrogen peroxide and nitric acid, on bonding characteristics of Malas(Homalium foetidum Benth) plywood, in which the effects of these oxidizing agents amount, pretreatment time, and pressing time and temperatue on shear strength of the plywood were examined and discussed. In this research the activation of veneer surface by oxidants was effective in raising shear strength but the difference in shear strength was not observed between hydrogen peroxide and nitric acid treatment. Hydrogen peroxide treatment, however, seemed to be more profitable to industrial application because of its lower concentration and easier handling than nitric acid. The bonding method by lignin-phenol adhesive through surface activation revealed inferior shear strength to phenol- and urea-formaldehyde adhesive but superior water resistance to urea-formaldehyde adhesive and this bonding method, in addition, have the advantage of lower cost compared with phenol-formaldehyde adhesive, Therefore, this bonding method by lignin-phenol adhesive through surface activation seemed to economical in manufacturing of water-resistant wood panel materials in future.

• Journal of Bio-Environment Control
• /
• v.18 no.3
• /
• pp.297-301
• /
• 2009

Hydrogen peroxide, which is used in various crops as an oxidizer to improve high temperature adaptation, was evaluated on the effects on productivity and disease incidence in paprika (Capsicum annuum L.) by periodic leaf spray at summer. Hydrogen peroxide treatment not only increased the leaf thickness and SPAD (chlorophyll content) but also the fruit set numbers per plant by 2. Hydrogen peroxide content increase in leaf resulted in increase of catalase and peroxidase activities, and the powdery mildew disease (Leveillula taurica) was also suppressed by the treatment. Transpiration was improved by the reduced leaf stomata resistance in the hydrogen peroxide treatment. Therefore, hydrogen peroxide leaf spray is recommended for improvement of summer productivity in paprika.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.12
• /
• pp.1520-1526
• /
• 2009

We have identified the iscR (PA3815) gene encoding an iron-sulfur cluster assembly regulator homolog as one of the genes required for peroxide resistance in Pseudomonas aeruginosa PA14. Here, we present the phenotypic characterization of an iscR deletion mutant in terms of KatA expression, stress responses, and virulence. The iscR null mutant exhibited reduced KatA activity at the posttranslational level, hypersensitivity to hydrogen peroxide, and virulence-attenuation in Drosophila melanogaster and mouse peritonitis models. These phenotypes were fully restored by multicopy-based expression of katA. These results suggest that the requirement of IscR in P. aeruginosa is related to the proper activity of KatA, which is crucial for peroxide resistance and full virulence of this bacterium.