• 항공우주시스템공학회지
• /
• 제18권3호
• /
• pp.8-16
• /
• 2024

수소는 매우 낮은 밀도를 갖기 때문에 화석연료와 동일한 수준의 에너지량을 저장하기 위해서는 기존과 다른 저장방식이 요구된다. 수소의 밀도를 높이는 방법으로는 수소를 액화하여 저장하는 방법이 있다. 하지만, 수소의 액화온도는 -252 ℃의 극저온이기 때문에 외부 열 유입에 의해 쉽게 기화된다. 액체수소가 기화되면 탱크 내부의 압력이 증가되는 자가증압 현상을 발생하므로, 탱크 설계 시 이 상승하는 압력을 잘 예측해야 한다. 따라서, 본 논문에서는 극저온 액체수소 연료탱크의 액체수소 충전 비율에 따른 내부 압력을 예측하였다. 탱크 내부의 압력 상승을 예측하기 위하여 1차원 열역학적 모델을 적용하였다. 열전달 모델은 열 유입, 액체수소의 기화, 연료 배출에 현상이 고려되었다. 최종적으로 연료탱크 내의 액체수소의 충전 비율에 따라 압력 상승 거동과 최대 상승 압력에 큰 차이가 있음을 확인하였다.

• 한국가스학회지
• /
• 제16권3호
• /
• pp.16-21
• /
• 2012

본 연구에서는 70MPa의 충전압력을 갖는 110L 수소연료 저장탱크에 대한 강도안전성을 FEM으로 해석하였다. 6061-T6 알루미늄 라이너의 외벽면에는 Toray의 T800-24K와 T700-12K, 그리고 Mitsubishi Ray의 MR60H-24P 탄소섬유를 사용하여 와인딩한 복합소재 연료탱크의 강도안전성을 미국의 DOT-CFFC와 KS의 안전규격으로 고찰하였다. 70MPa용 수소가스탱크의 응력강도에 대한 FEM 해석결과에 의하면, 거의 유사한 소재특성을 갖는 Toray의 T800-24K와 Mitsubishi Ray의 MR60H-24P는 70MPa의 수소연료 저장탱크를 제조하는데 사용해도 안전한 것으로 나타났다. 반면에, Toray의 T700-12K는 70MPa의 충전압력을 갖는 복합소재 저장탱크를 제조하기에는 강도안전성을 보장할 수 없으므로 60MPa 이하의 수소연료 복합소재탱크 제조를 권장한다.

• 자동차안전학회지
• /
• 제13권4호
• /
• pp.92-98
• /
• 2021

Recently hydrogen fuel cell buses have been deployed for the public transportations. In order to introduce buses fueled by hydrogen successfully, the research results of hydrogen bus safety should be discussed and investigated significantly. Especially, Korean government drives research in terms of various applications of hydrogen energy to replace the conventional fuel energy resources and to improve the safety evaluation. Thus it is necessary to examine vehicle crashworthiness under side impact loadings. This study was focused on the simulation result evaluation of full bus model and simplified bus model with hydrogen fuel tank module and mounting system located below floor structure due to the significance of bus side impact accidents. The finite element models of hydrogen bus, fuel tank system and side impact moving barrier were set up and simulation results reported model performance and result comparison of two side impact models. Computational results and research discussion showed the conceptual side impact framework to evaluate hydrogen bus crashworthiness.

• 한국수소및신에너지학회논문집
• /
• 제22권4호
• /
• pp.520-526
• /
• 2011

In recent years, it is very important that hydrogen storage system is safe for user in any circumstances in case of crash and fire. Because the hydrogen vehicle usually carry high pressurized cylinders, it is necessary to do safety design for fire. The Global Technical Regulation (GTR) has been enacted for localized and engulfing fire test. High pressure hydrogen storage system of fuel cell electrical vehicles are equipped with Thermal Pressure Relief Device (TPRD) installed in pressured tank cylinder to prevent the explosion of the tank during a fire. TPRDs are safety devices that perceive a fire and release gas in the pressure tank cylinder before it is exploded. In this paper, we observed the localized and engulfing behavior of tank safety, regarding the difference of size and types of the tanks in accordance with GTR.

• 한국수소및신에너지학회논문집
• /
• 제10권3호
• /
• pp.151-157
• /
• 1999

The development of hydrogen vehicles has been actively progressed in the developed countries such as U. S., Japan and Germany. The most important technology of using hydrogen fuel is to develope a compatible storage tank with respect to the fossil fuel tank. Among many storage methods, the liquid hydrogen is the most desirable state because of the lowest volume and weight. The metal hydride tank is too heavy and the compressed hydrogen tank is too bulky. Because of these reasons, it is the principal purpose to analyze the theoretical heat transfer for designing and manufacturing an actual $LH_2$ tank. The insulation methods of the room between inner and outer vessel are non-vacuum, vacuum, vacuum with MLI(Multi-Layer Insulation). According to the results of the numerically calculated heat leak through the walls of the $LH_2$ tank, the vacuum insulated tank has 20 times and the MLI tank has 5616 times less heat leak than the non-vacuum tank.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.353-358
• /
• 2010

High pressure gas is a widely used storage mode for hydrogen fuel. A typical hydrogen tank that is charged with hydrogen gas can function as a hydrogen supply source in a large number of applications. The filling process of a high-pressure hydrogen tank should be reasonably short. However, when the fill time is short, the maximum temperature in the tank increases. Therefore the process should be designed in such a way to avoid high temperatures in the tank because of safety reasons. The paper simulates the fast filling process of hydrogen tanks using Computational Fluid Dynamics method. The local temperature distribution in the tank is obtained. Results obtained are compared with available experimental data. Further work is going on to improve the accuracy of the calculations.

• 자동차안전학회지
• /
• 제13권4호
• /
• pp.73-80
• /
• 2021

Recently, Korea has established a plan for the supply of hydrogen vehicles and is promoting the expansion of the supply. Risk factors for hydrogen vehicles are hydrogen leakage, jet fire, and explosion. Therefore Safety measures are necessary for this hazard. In addition, risks in semi-closed spaces such as tunnels, underground roads, and underground parking lots should be analyzed. In this study, an explosion experiment was conducted on a hydrogen tank used in a hydrogen vehicle to analyze the risk of a hydrogen vehicle explosion accident that may occur in a semi-closed space. As results, the effect on the structure and the human body was analyzed using the overpressure and impulse values for each distance generated during the explosion.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권2호
• /
• pp.27-38
• /
• 2022

Urban air mobility (UAM) has recently attracted lots of attention as a solution to urban centralization and global warming. Electric vertical take-off and landing (eVTOL) is a concept that emerges as one of the promising and clean technologies for UAM. There are two difficult challenges for eVTOL aircraft to solve. One is how to improve the weight efficiency of aircraft, and the other is how to complete long-range missions for UAM's flight scenarios. To approach these challenges, we propose a consolidated concept design of battery-fuel cell hybrid tiltrotor aircraft with a liquid hydrogen (LH₂) fuel tank. The efficiency of a battery-fuel cell hybrid powertrain system on the designed eVTOL aircraft is compared to that of a battery-only powertrain system. This paper shows how much payload can increase and the flight scenario can be improved by hybridizing the battery and fuel cell and presenting a detailed concept of a cryogenic storage tank for LH₂.

• 한국수소및신에너지학회논문집
• /
• 제35권3호
• /
• pp.300-309
• /
• 2024

Hydrogen utilization in the transportation sector, which relies on fossil fuels, can significantly reduce greenhouse gas by using to hydrogen fuel cell vehicles, and its adoption depends performance of hydrogen refueling station. The present study developed a model to simulate the back-to-back filling process of heavy duty hydrogen fuel cell vehicles at hydrogen refueling stations using a cascade method. And its quantitatively evaluated hydrogen refueling station performance by simulating various mass flow rates and storage tank capacity combinations, analyzing vehicle state of charge (SOC) of vehicles. In the cascade refueling system, the capacity of the high-pressure storage tank was found to have the greatest impact on the reduction of filling time and improvement of efficiency.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.320-325
• /
• 2005

Power of fuel cell tram is supplied by only fuel cell system or hybrid system of fuel cell and battery/super capacity. Fuel cell is operated by hydrogen, which is fed directly from hydrogen tank or by reforming gasoline or methanol into hydrogen. Power system is preferred with hybrid of fuel cell and battery/super capacity since it improves total energy efficiency through interaction of hybrid components and restores energy regenerated by braking. Also, power supply system by fuel cell hybrid should be designed to output optimum energy efficiency depending on driving mode of fuel cell tram.