• 공업화학
• /
• 제4권2호
• /
• pp.409-415
• /
• 1993

Lippin cott/schroeder 포텐샬 함수는 O-H---O와 같은 수소결합 시스템에 응용되고, 좋은 데이터를 주기 위하여 약간 수정된다. 이 모델의 사용은 Van der Waals 반발력과 정전기적 상호작용을 표현하는 항들을 요구하며, 이들 항들은 평형조건으로부터 결정된다. 이 간단한 모델을 사용하므로서, 주파수이동과 수소결합 형성의 엔탈피 관계는 직선이 될 것으로 예상되며, 이것은 문헌에 있는 실험적 결과와 일치한다는 것을 보여준다.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3279-3282
• /
• 2010

The reaction rates of 4-X-2,6-dinitrochlorobenzenes (X = $NO_2$, CN, $CF_3$) with Y-substituted benzylamines (Y = p-$OCH_3$, p-$CH_3$, H, p-Cl) in MeOH-MeCN mixtures were measured by conductometry at $25^{\circ}C$. It was observed that the rate constant increased in the order of X = $NO_2$ > CN > $CF_3$ and in the order of Y = p-$OCH_3$ > p-$CH_3$ > H > p-Cl. When the solvent composition was varied, the rate constant increased in the order of 100% MeOH < 50% (v/v) MeOH-MeCN < 100% MeCN. These results may be ascribed to the formation of hydrogen bonds between the alcoholic hydrogen and nitrogen of benzylamines in groud state (GS). We conclude that the reaction takes place via $S_NAr$ base on the transition state parameters ${\rho}x$, ${\rho}Y$, $\beta_{nuc}$, and solvent effects.

• Applied Science and Convergence Technology
• /
• 제26권6호
• /
• pp.174-178
• /
• 2017

The reactions of thermal hydrogen atoms H(g) with the Ge(100) surface were examined with temperature-programmed desorption (TPD) mass spectrometry. Concomitant $H_2$ and $CH_4$ TPD spectra taken from the H(g)-irradiated Ge(100) surface were distinctly different for low and high H(g) doses/substrate temperatures. Reactions suggested by our data are: (1) adsorbed mono(${\beta}_1$)-/di-hydride(${\beta}_2$)-H(a) formation; (2) H(a)-by-H(g) abstraction; (3) $GeH_3$(a)-by-H(g) abstraction (Ge etching); and (4) hydrogenated amorphous germanium a-Ge:H formation. While all these reactions occur, albeit at higher temperatures, also on Si(100), H(g) absorption by Ge(100) was not detected. This is in contrast to Si(100) which absorbed H(g) readily once the surface roughened on the atomic scale. While this result is rather against expectation from its weaker and longer Ge-Ge bond as well as a larger lattice constant, we attribute the absence of direct H(g) absorption to insufficient atomic-scale surface roughening and to highly efficient subsurface hydrogenation at moderate (>300 K) and low (${\leq}300K$) temperatures, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제21권10호
• /
• pp.959-968
• /
• 2000

Direct reaction of elemental silicon with a mixture of (dichloromethyl)silanes 1 $[Cl_3-nMenSiCHCl_2:$ n = 0 (a), n = 1(b), n = 2(c), n = 3(d)] and hydrogen chloride has been studied in the presence of copper catalyst using a stirred bed reactor equ ipped with a spiral band agitator at various temperatures from $240^{\circ}C$ to $340^{\circ}C.$ Tris(si-lyl) methanes with Si-H bonds, 3a-d $[Cl_3-nMenSiCH(SiHCl_2)_2]$, and 4a-d $[Cl_3-nMenSiCH(SiHCl_2)(SiCl_3)]$, were obtained as the major products and tris(silyl)methanes having no Si-H bond, 5a-d $[Cl_3-nMenSiCH(SiCl_3)_2]$, as the minor product along with byproducts of bis(chlorosilyl)methanes, derived from the reaction of silicon with chloromethylsilane formed by the decomposition of 1. In addition to those products, trichlorosilane and tetra-chlorosilane were produced by the reaction of elemental silicon with hydrogen chloride. The decomposition of 1 was suppressed and the production of polymeric carbosilanes reduced by adding hydrogen chloride to 1. Cad-mium was a good promoter for and the optimum temperature for this direct synthesis was $280^{\circ}C$.

• 대한화학회지
• /
• 제63권1호
• /
• pp.29-36
• /
• 2019

A potentially tetradentate Schiff base ligand, 2-((2-((pyridin-2-ylmethylene)amino)ethyl)amino)ethan-1-ol (PMAE), and its cadmium(II) complex, [$Cd(PMAE)I_2$] (1), were prepared and characterized by elemental analysis, FT-IR, Raman, $^1H$ and $^{13}C$ NMR spectroscopies and single-crystal X-ray diffraction. In the crystal structure of 1, the cadmium atom has a slightly distorted square-pyramidal geometry and a $CdN_3I_2$ environment in which the PMAE acts as an $N_3$-donor. In the crystal packing of the complex, the alcohol and amine groups of the coordinated ligands participate in hydrogen bonding with iodide ions and form $R^2{_2}(14)$ and $R^2{_2}(8)$ hydrogen bond motifs, respectively. In addition to the hydrogen bonds, the crystal network is stabilized by ${\pi}-{\pi}$ stacking interactions between pyridine rings. The thermodynamic stability of the isolated ligand and its cadmium complex along with their charge distribution patterns were studied by DFT and NBO analysis.

• 공업화학
• /
• 제22권5호
• /
• pp.579-581
• /
• 2011

과산화수소에 의한 모발의 화학적 손상을 SEM/EDS, CLSM, FT-IR을 통해 평가하였다. SEM/EDS상에서 과산화수소 처리된 모발은 미처리 모발에 비해 표면의 비늘구조 사이의 간격이 벌어졌고, 구성원소를 분석한 결과 황의 비율이 감소하였으며 산소의 비율은 상대적으로 증가하였다. CLSM 관찰 결과 미처리 모발은 강한 형광을 나타내었지만, 탈색모발은 낮은 형광을 보여주었다. 이는 미처리 모발의 경우 자동형광을 나타낼 수 있는 방향족 아미노산이 많이 존재하는데 비해, 탈색모발은 방향족 아미노산이 파괴되어 형광이 낮게 나온 것으로 볼 수 있다. 또한 FT-IR 분석결과 탈색의 증가에 따라 시스테인산(cysteic acid)이 증가되었으며, 이는 폴리펩타이드 사슬사이에 다리결합을 하고 있는 시스틴의 산화에 의한 것으로 볼 수 있다. 이러한 결과들은 산화적 손상이 S-S 결합을 파괴하고 모발 섬유의 인장력을 낮추어 주는 것을 의미한다.

• Bulletin of the Korean Chemical Society
• /
• 제18권3호
• /
• pp.274-280
• /
• 1997

The rates and stoichiometry of the reaction of gallane-trimethylamine with selected organic compounds containing representative functional groups were examined in tetrahydrofuran solution under standardized conditions (THF, 0 ℃). And its reducing characteristics were compared with those of aluminum hydride-triethylamine(AHTEA). The rate of hydrogen evolution from active hydrogen compounds varied considerably with the nature of the functional group and the structure of the hydrocarbon moiety. Alcohols, phenol, amines, thiols evolved hydrogen rapidly and quantitatively. Aldehydes and ketones were reduced moderately to the corresponding alcohols. Cinnamaldehyde was reduced to cinnamyl alcohol, which means that the conjugated double bond was not attacked by gallane-trimethylamine. Carboxylic acids, esters, and lactones were stable to the reagent under standard conditions. Acid chlorides also were rapidly reduced to the corresponding alcohols. Epoxides and halides were inert to the reagent. Caproamide and nitrile were stable to the reagent, whereas benzamide was rapidly reduced to benzylamine. Nitropropane, nitrobenzene and azoxybenzene were stable to the reagent, whereas azobenzene was reduced to 1,2-diphenylhydrazine. Oximes and pyridine N-oxide were reduced rapidly. Di-n-butyl disulfide and dimethyl sulfoxide were reduced only slowly, but diphenyl disulfide was reduced rapidly. Finally, sulfones and sulfonic acids were inert to the reagent under the reaction.

• The Journal of Advanced Prosthodontics
• /
• 제5권2호
• /
• pp.126-132
• /
• 2013

PURPOSE. Post surface conditioning is necessary to expose the glass fibers to enable bonding between fiber post and resin cement. The purpose of the present study was to evaluate the effect of different surface conditioning on tensile bond strength (TBS) of a glass fiber reinforced post to resin cement. MATERIALS AND METHODS. In this in vitro study, 40 extracted single canal central incisors were endodontically treated and post spaces were prepared. The teeth were divided into four groups according to the methods of post surface treatment (n=10): 1) Silanization after etching with 20% $H_2O_2$, 2) Silanization after airborne-particle abrasion, 3) Silanization, and 4) No conditioning (Control). Adhesive resin cement (Panavia F 2.0) was used for cementation of the fiber posts to the root canal dentin. Three slices of 3 mm thick were obtained from each root. A universal testing machine was used with a cross-head speed of 1 mm/minute for performing the push-out tests. Two-way ANOVA and Tukey post hoc tests were used for analyzing data (${\alpha}$=0.05). RESULTS. It is revealed that different surface treatments and root dentin regions had significant effects on TBS, but the interaction between surface treatments and root canal regions had no significant effect on TBS. There was significant difference among $H_2O_2$ + Silane Group and other three groups. CONCLUSION. There were significant differences among the mean TBS values of different surface treatments. Application of hydrogen peroxide before silanization increased the bond strength between resin cements and fiber posts. The mean TBS mean values was significantly greater in the coronal region of root canal than the middle and apical thirds.

• 공업화학
• /
• 제10권5호
• /
• pp.743-747
• /
• 1999

비상용성인 polystyrene(PS)와 polymethacrylate(PMA)의 블렌드에서 분자간 수소결합이 가능하도록 구성고분자를 변성하였다. 공중합을 통해 hydroxystyrene 함량이 몰분율로 각각 7%, 10%, 18% 도입된 poly(styrene-co-4-hydroxystyrene) (modified polystyrene, MPS)을 합성하여 블렌드의 상용성 변화를 살펴보았다. 또한 PMA의 측쇄의 크기가 분자간 수소결합 형성에 미치는 영향을 조사하기 위하여 각각 methyl기, butyl기, hexyl기, ethylhexyl기의 측쇄를 갖는 PMA를 선정하였다. 그 결과 수산기의 함량이 증가함에 따라 분자간 수소결합 형성이 증가하였다. PMA의 측쇄의 크기에 따라 수소결합 형성 정도가 영향을 받아 상용성에 큰 차이가 나타남을 온도변화에 따른 상변화 거동을 통하여 확인하였다. 측쇄의 크기가 증가됨에 따라 입체장애 효과와 증가된 사슬의 운동성 때문에 분자간 수소결합의 형성 및 수소 결합력은 크게 감소하였다.

• 한국진공학회지
• /
• 제15권4호
• /
• pp.360-366
• /
• 2006

0,25 ML의 산소원자가 흡착하여 이루는 O/Pd(100)-p($2{\times}2$) 표면의 원자구조를 밀도범함수 이론 계산을 통해 연구하였다, Pd(100) 표면의 fourfold hollow 위치가 가장 안정된 산소 흡착위치로 밝혀졌고 O-Pd 결합거리는 $2,15{\AA}$으로 계산되었다. 산소 흡착에 의해 Pd(100) 표면의 첫 번째 층간격 ($d_{12}$) 은 +0,8%의 팽창을 보이는데 이 계산결과는 +3,6%의 팽창을 보고 한 LEED 실험 결과와 차이를 보인다. 차이의 원인으로 시료 표변에 수소 불순물이 존재하였을 가능성을 고려하여 계산한 결과, O/Pd(100)-p($2{\times}2$)에 수소원자가 흡착할 때 $d_{12}$의 팽창이 유발됨을 확인하였다. 수소 흡착량에 따른 구조변화를 분석하여 LEED 시료 표변에 잔존할 것으로 예상되는 수소의 양을 약 0,3 ML로 추정하였다.