• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권6호
• /
• pp.1007-1019
• /
• 2015

The determination of the required seawall height is usually based on the combination of wind speed (or wave height) and still water level according to a specified return period, e.g., 50-year return period wind speed and 50-year return period still water level. In reality, the two variables are be partially correlated. This may be lead to over-design (costs) of seawall structures. The above-mentioned return period for the design of a seawall depends on economy, society and natural environment in the region. This means a specified risk level of overtopping or damage of a seawall structure is usually allowed. The aim of this paper is to present a conditional risk probability-based seawall height design method which incorporates the correlation of the two variables. For purposes of demonstration, the wind speeds and water levels collected from Jiangsu of China are analyzed. The results show this method can improve seawall height design accuracy.

• 한국농공학회지
• /
• 제18권2호
• /
• pp.4121-4126
• /
• 1976

• 한국환경과학회지
• /
• 제11권3호
• /
• pp.191-199
• /
• 2002

In this study, water protection reservoir is selected as the target which is located at the estuary of Taehwa river to analyze and examine the effects of hydraulic structure on river environment. This study aims at the definition of factors which cause the change of ecological environment of river due to the effects of the sediment protection reservoir, and the proposal of the direction of environmental friendly river space development through the analysis and examination of stream variation conditions and riverbed variation characteristics among many effects of hydraulic structure on river environment before and after removal of the sediment protection reservoir when design flow is yielded. Firstly, in case of removal the existing sediment protection reservoir, the hydraulic variation characteristics like depth drop due to removal of the sediment protection reservoir are thought of little because it is examined that depths drop with about 0.01m and 0.01~0.56m when low flow is yielded and design flood yielded, respectively. Nextly, as the examination result of the variation characteristics of flow velocity in case of removal the existing sediment protection reservoir, it is thought that the concern about riverbed erosion is not serious according to the analyzed result as the mean velocity of the channel section where the velocity varies in case of removal the sediment protection reservoir is about 0.07~1.36m/s when low flow is yielded, and is about 1.02~2.41m/s when design flood is yielded despite riverbed erosion is concerned as it is examined that flow velocity is getting increase as about 0.01m/s when low flow is yielded and about 0.01~0.44m/s when design flood is yielded. Lastly, from the prediction result of riverbed variation for each flow amount condition before and after removal the sediment protection reservoir, it is known that the variation range of riverbed is nearly constant when flow amount of the channel exceeds a specific limit as it is analyzed that the more flow amount, the more erosion and sediment in the channel section of down stream part of the sediment protection reservoir and the sediment protection reservoir~Samho-gyo, and the variation ranges according to flow amount between flood condition and design flood condition have little difference in the channel section of the upstream of Samho-gyo.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.945-950
• /
• 1991

A method to design a robust servomechanism by continuously variable structure control is proposed. The state and control signal of this servomechanism do notchatter since a continuous control scheme is used. The input-output relation of this servomechanism is determined by prescribing a hyperplane in a state space of which the neighborhood is asymptotically attractive everywhere. This control mechanism was applied to a single rod cylinder servomechanism which has the nonlinerities due to their nonsymmetrical structure and its excellency was verified.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.124-143
• /
• 2010

Cofferdam is a temporary levee or dam structure built by using sheet pile or earth materials to prevent water infiltration during construction work of bridge, dam, harbour dock, or hydraulic structures in the river. In this regard, it is required to secure cutoff ability for dry work and workability for rapid installation and removal of the temporary dam or levee structures. In this paper, case studies for design and construction of cofferdam were performed, and water diversion method was briefed with some examples of cofferdam type as well. For the case study details of design and construction were reviewed based on cofferdams under construction related to 16 submerged weirs of "The 4-river restoration project" and dam type cofferdam respectively. From the review, it was known that the method for changing the water flow is selected based on the data from geological and geo-hydraulic site investigation in order to mitigate environmental effects by making sure if the design cross-sectional area of flow and maximum working days are sufficiently guaranteed. Finally, the primary findings and main conclusion derived are summarized that determination of applicable type of cofferdam should be checked by case study and meet design requirements such as water inflow control, constructability.

• 한국해안·해양공학회논문집
• /
• 제27권5호
• /
• pp.345-352
• /
• 2015

본 연구에서는 직립식 구조물의 전달파고계수 산정을 위한 2차원 수리실험을 실시하였다. 불규칙파를 입사파로 적용하였으며 직립식 구조물에 대한 전달파고계수 산정식을 제안하고, Goda(1969) 등의 결과와 비교하였다. Goda(1969)의 결과는 입사파로 규칙파를 적용한 결과로서 불규칙파를 적용한 본 실험의 결과와 차이를 보였다. Goda의 결과가 본 연구에 비하여 크게 전달파고계수를 제시하는 것을 알 수 있었다. 또한 Goda는 직립벽에 대하여 평균, 상한 및 하한에 대한 계수값을 제시하였으나(d=h조건), 본 연구에서는 각각의 설계요소(구조물 폭, 수심, 파장 등)가 전달파고계수에 주는 영향을 계수를 통하여 정량적으로 제시하였다. 또한 여유고가 0인 조건에 대한 에너지보존 및 전달파고 특성을 제시하였다.

• 한국해안해양공학회지
• /
• 제19권1호
• /
• pp.66-72
• /
• 2007

연안역의 파랑을 효율적으로 제어하고 경제적으로 유리한 구조물로서 다원주 파일군을 제안하고, 이 구조물의 수리학적 특성을 검토하기 위해 3차원 수리모형실험을 수행하였다. 이 실험에서는 콘크리트를 사용한 기존의 파제제와 아크릴로 제작된 다원주 파일 형태를 이용한 구조물을 동일 평면배치 상에서 파고분석을 통해 파랑제어 및 항내 정온도 향상 여부를 분석하였다. 결과적으로 동일 평면배치 상에서의 항내 정온도 효과는 파제제 설치 > 교차 배열 다원주 파일군 설치 > 정방형 배열 다원주 파일군 설치 순으로 나타났다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.192.1-192.1
• /
• 2010

Micro hydraulic turbines take a growing interest because of its small and simple structure as well as high possibility of applying to micro and small hydropower resources. The differential pressure exiting within the city water pipelines can be used efficiently to generate electricity like the energy generated through gravitational potential energy in dams. In order to reduce water pressure at the inlet of water cleaning centers, pressure reducing valves are used widely. Therefore, pressure energy is wasted. Instead of using the pressure reduction valve, a micro counter-rotating hydraulic turbine can be replaced to get energy caused by the large differential pressure found in the city water pipelines. In this paper, detail studies have been carried out to acquire basic design data of micro counter-rotating hydraulic turbine, output power, head, and efficiency characteristics on various number of runner vane. Moreover, the influences of pressure, tangential and axial velocity distributions on turbine performance are also investigated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.169-171
• /
• 2008

The brake systems of the rolling stocks are generally consisted of electrical and mechanical brake systems. Because of its inherent structure of the each brake system, the electrical brake system is mainly used at the high speed range while the mechanical brake system is used at the relatively lower speed range. It is desirable for the rolling stocks to apply the entire electrical brake system. However, since the brake force from electric brake system is not enough to stop the rolling stock within the legal stop distance. Therefore, the mechanical brake system is indispensable to rolling stocks. In general, the vast majority of the world trains are equipped with mechanical braking systems which use compressed air as the force to push block on to wheels or pads on to discs. These mechanical systems are known as air brake or pneumatic brakes. For the air brake system, basically huge scale air compressor is equipped and the long pipe line is complexively connected. Since mass of these air brake components, it is difficult to be a light weight equipment and the long pipe line raise the maintenance problem. In order to overcome these problems of air brake system, the hydraulic brake system is proposed in this research. The hydraulic brake system makes the whole weight of brake equipment be light and large braking force can be applied. Therefore, in this research, the validity and advantages of applying the hydraulic brake system are reviewed.

• 소음진동
• /
• 제11권1호
• /
• pp.96-103
• /
• 2001

지금까지의 여러 연구들에서 유압식 반능동 시스템은 적절하게 동작을 한다면 전능동 유압식 댐퍼 만큼의 구조물 진동저감 능력이 있음을 끊임없이 보여주고 있다. 이 논문에서는 축소 구조물에 설치된 반능동 시스템의 진동저감 성능을 기술하고 있다. 본 논문에서 제안한 시스템의 에너지를 소산시키기 위해 리아푸노브방법을 적용한 바이스테이트 제어의 효과를 수치적 및 실험적으로 입증한 결과들을 먼저 제시한다. 또한 바이스테이트 제어 성능을 다른 두 제어기와 비교 평가하였다. 이 연구결과를 통해 반능동 시스템은 구조물 진동저감에 저렴하면서도 효과적임을 보여준다.