• Geomechanics and Engineering
• /
• v.13 no.4
• /
• pp.671-683
• /
• 2017

Groundwater control is a significant issue in most underground construction. An estimate of the inflow rate is required to size the pumping system, and treatment plant facilities for construction planning and cost assessment. An estimate of the excavation-induced drawdown of the initial groundwater level is required to evaluate potential environmental impacts. Analytical and empirical methods used in current engineering practice do not adequately account for the effect of the jointed-rock-mass anisotropy and heterogeneity. The impact of geostructural anisotropy of fractured rocks on tunnel inflows is addressed and the limitations of analytical solutions assuming isotropic hydraulic conductivity are discussed. In this paper the unexcavated Zagros tunnel route has been classified from groundwater flow point of view based on the combination of observed water inflow and numerical modeling results. Results show that, in this hard rock tunnel, flow usually concentrates in some areas, and much of the tunnel is dry. So the remaining unexcavated Zagros tunnel route has been categorized into three categories including high Risk, moderately risk and low risk. Results show that around 60 m of tunnel (3%) length can conduit the large amount of water into tunnel and categorized into high risk zone and about 45% of tunnel route has moderately risk. The reason is that, in this tunnel, most of the water flows in rock fractures and fractures typically occur in a clustered pattern rather than in a regular or random pattern.

• Water for future
• /
• v.28 no.1
• /
• pp.153-168
• /
• 1995

The purpose of this study is to develop an efficient model for the least cost design of multisite detention systems. The IDP (Incremental Dynamic Programming) model for optimal design is composed of two sub-models: hydrologic - hydraulic model and optimization model. The objective function of IDP is the sum of costs; acquisition cost of the land, construction cost of detention basin and pumping system. Model inputs include channel characteristics, hydrologic paramenters, design storm, and cost function. The model is applied to the Jung- Rang Cheon basin in Seoul, a watershed with detention basins in multiple branching channels. The application results show that the detention system can be designed reasonably for various conditions and the model can be applied to multi-site detention system design.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.167-172
• /
• 2002

Seoul subway system has been constructed to solve traffic difficulties of Seoul metropolitan, and now is the major public transportation. However, the more line has added in the system the deeper the bottom of the tunnel base. And a huge amount of groundwater along the line has seeping into the tunnel. Several subway stations has pumping system to extract the groundwater to the outside and consequently, groundwater table along the line has declined gradually. Groundwater table has dropped about 40 meters at some areas, There was some study for the proper usage of the abstracted groundwater and the project to use the groundwater has launched already by the local government. However. more serious problem is expected on quality degradation of soil and groundwater as the decline of groundwater table along the subway line. This study suggests that the detailed groundwater environmental study should be made as soon as possible for this. If there is any pollution leaking at the surface area of the groundwater depression, the pollution will be seep into the subway tunnel in some day even though the time will be different with the soil material and hydraulic characteristics of the aquifer. And the polluted area of the soil and groundwater would be enlarged along the pathway The study on possibility of the soil subsidence and reducing surface water flow in small creek were also needed. This study suggest one of the counter measurement that restoring the declined groundwater table after groundwater environmental study

• Journal of Soil and Groundwater Environment
• /
• v.6 no.4
• /
• pp.73-81
• /
• 2001

With the development of industry and standard of living, the quantity of groundwater consumption has been increasing. For the analysis of groundwater, to determine the hydraulic parameters of aquifer is very important. Various numerical methods have been developed to solve aquifer tests and eliminate the subjectivity of traditional graphical type curve methods. The slope-matching method, which matches the slope of the Theis type curve to the slope of the field data, can be used to numerically solve pump tests for both leaky and nonleaky aquifers. A FORTRAN program on based slope-matching method was developed to obtain the transmissivity, storage coefficient, and leaky factor from pumping test data automatically. Results derived from published data show that the improved slope-matching method gives parameters close to the ones derived by the slope-matching method.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.1
• /
• pp.21-29
• /
• 1998

Groundwater exploitation from fissured bedrocks is increasing in Korea and over-withdrawn from a lot of production wells may cause exhaution of groundwater in the fissured aquifer. To conserve groundwater resources, it is needed to exactly determine the optimal yield of production wells. The optimal yield of the production wells can be determined as using suitable aquifer models with appropriate hydraulic parameters and natural recharge of the region. We applied the technique for evaluating optimal yield to the pumping test conducted in Mountain Geumryeon of Pusan City and analyzed its applicability.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.125-130
• /
• 2008

The present study numerically simulates the flow and heat transfer characteristics of rib-induced secondary flow in a cooling channel with staggered V-shaped ribs, extruded on both walls. The rib pitch-to-height ratio (p/h) varies from 2.8 to 10 with the rib-height-to-hydraulic diameter ration ($h/D_h$) of 0.07 and the Reynolds number of 50,000. Shear stress transport (SST) turbulence model is used as a turbulence model. Computational results show that complex secondary flow patterns are generated in the duct due to the snaking flow in the streamwise direction for all tested cases. In the range of p/h=5 to 10 the staggered V-shaped rib gives about 3 times higher heat transfer augmentation than the reference smooth channel with high heat transfer on both front side and the area around the leading edge of the ribs, while the former cases give about 2.5 times higher streamwise pressure drop than the latter ones. Consequently, for the thermal performances, based on the equal pumping power condition, the staggered ones give about 2 times higher values than the latter ones with more uniform heat transfer distribution.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.97-102
• /
• 2003

An experimental study is conducted to investigate the effects of duct corrugation angle on heat/mass transfer characteristics in wavy ducts by using a naphthalene sublimation technique. The corrugation angles of the wavy ducts are $145^{\circ}$ , $130^{\circ}$ and $115^{\circ}$ . and the Reynolds numbers based on the duct hydraulic diameter vary from 300 to 3,000. At the low $Re(Re{\leq}1000)$, high heat/mass transfer regions are formed by the secondary vortex flows called Taylor-Gortler vortices on both pressure-side and suction-side walls. At the high $Re(Re{\geq}1000)$, the effects of these secondary flows are vanished. As corrugation angle decreases, the local peak Sh induced by Taylor-Gertler vortices are increased and average Sh also enhanced. More pumping power (pressure loss) is required with the smaller corrugation angle due to the stronger secondary vortex flows.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.3
• /
• pp.57-62
• /
• 2020

Concrete pump cars are a type of construction equipment that continuously supplies concrete using hydraulic pressure. When manually casting concrete, there may be a problem in the final quality of the concrete due to differences in the degree of cure between the pre-poured and subsequent concretes. Concrete pump cars are the most efficient machines to supply concrete in the shortest time; however, it is difficult to calculate their margin of safety during operation. In this paper, we verified the structural safety of the concrete pump car using a static/dynamic analysis at various position angles. Next, these results were compared with experimental results; strains using strain gages were compared with the strains measured using FEM software to verify the static analysis. In addition, the maximum displacement during the pumping was measured and it was used for fatigue analysis to evaluate the dynamic structural safety.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2448-2453
• /
• 2008

The present study numerically investigates the flow and heat transfer characteristics of rib-induced secondary flow in a cooling channel with staggered V-shaped ribs, extruded on both walls. The rib-height-to-hydraulic diameter ration (h/$D_h$) is 0.17; the rib pitch-to-height ratio (p/h) equals 2.8; the Reynolds number is 50,000. Shear stress transport (SST) turbulence model is used as a turbulence closure. The present results are compared with those for a continuous V-shaped rib. Computational results show that, for average heat transfer rate the staggered V-shaped rib gives about 2.5 times higher values than the continuous V-shaped rib, while, for the streamwise pressure drop the former gives about 5 times higher values than the latter. Consequently, for the thermal performances, based on the equal pumping power condition, the staggered one gives about 2 times higher values than the continuous one. Also, for the staggered V-shaped rib, complex secondary flow patterns are generated in the duct due to the snaking flow in the streamwise direction, and more uniform heat transfer distributions are obtained.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.207-207
• /
• 2015

지표수 수자원은 다른 형태의 수자원에 비하여 경제성은 우수하나 환경 훼손, 시공간적 변동성에 대한 취약성, 각종 수질 위협요소에 노출되는 단점 을 가지고 있다. 지표수 수자원과는 달리 Aquifer Storage Transportation and Recovery (ASTR) System을 이용한 지하저수지는 수자원의 안전한 확보, 환경문제 등의 측면에서 새로운 대안으로 제시되고 있다. '청정지하저수지연구단'에서 연구하고 있는 '대규모청정지하저수지'는 피압대수층에 담수를 주입하여 형성된 담수체를 수자원으로 이용한다. 본 연구는 피압대수층 주입정 및 양수정 운영에 따른 지반영향을 연구하였다. 과거 지반변형을 고려하지 않은 무분별한 피압대수층의 지하수 개발로 태국, 중국 등지에서 심각한 지반침하를 야기하였으며 이에 대한 대책으로 인공함양이 이루어진바 있다. 피압대수층 상부에 위치한 점토층은 지반변형에 가장 큰 영향을 미치며 점토층의 변형 혹은 파괴 시 지하수 이용 및 인간의 활동에도 영향을 끼칠 수가 있다. 본 연구의 목적은 주입 및 양수가 점토층에 미치는 영향을 분석하고 지반변형을 허용 범위 내로 국한시키기 위해서 피압대수층에 가할 수 있는 최대 수위변화량을 산정하는 데 있다. 양수로 수두가 감소하는 경우 유효응력 증가에 따른 지반침하가 우려되며, 주입으로 수두가 상승하는 경우 지반파괴가 야기될 수 있다.