• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.2
• /
• pp.782-795
• /
• 2019

Safety is always acritical focus of exploration of ocean resources, and it is well recognized that human factor is one of the major causes of accidents and breakdowns. Our research developed a dynamic human reliability assessment approach, Predicted Mean Vote-Cognitive Reliability and Error Analysis Method (PMV-CREAM), that is applicable to monitoring the cognitive reliability of oceanauts during deep-sea missions. Taking into account the difficult and variable operating environment of manned submersibles, this paper analyzed the cognitive actions of oceanauts during the various procedures required by deep-sea missions, and calculated the PMV index using human factors and dynamic environmental data. The Cognitive Failure Probabilities (CFP) were calculated using the extended CREAM approach. Finally, the CFP were corrected using the PMV index. This PMV-CREAM hybrid model can be utilized to avoid human error in deep-sea research, thereby preventing injury and loss of life during undersea work. This paper verified the method with "Jiaolong" manned submersible 7,000 m dive test. The"Jiaolong" oceanauts CR(Corrected CFP) is dynamic from 3.0615E-3 to 4.2948E-3, the CR caused by the environment is 1.2333E-3. The result shown the PMV-CREAM method could describe the dynamic human reliability of manned submersible caused by thermal environment.

• Journal of the Korea Society for Simulation
• /
• v.23 no.2
• /
• pp.1-6
• /
• 2014

CPS (cyber-physical systems) which consists of connected and diverse embedded systems and physical systems are a new paradigm. Traditional systems were usually considered to be passive and dumb parts in physical systems, but with CPS, we have to take into account what are being moved or changed in the physical systems. So, as increasing the complexity of CPS, potential errors in the systems also increase. In this paper, for enhancing the reliability of CPS, we exploit an executable-model-based design methodology and propose a distributed simulation method to verify the design of CPS. For the design of the systems including discrete and continuous factors, we apply DEV&DESS formalism and simulate models in distributed simulation environments through DDS middleware. We also illustrate the applications of CPS with our modeling tool.

• Journal of Korean Academy of Nursing
• /
• v.46 no.6
• /
• pp.793-803
• /
• 2016

Purpose: Developmental care has been recognized as a very important component for the development and health promotion of preterm infants. However, research on how to assess developmental nursing competency has not been studied as expected. This study was done to develop and evaluate a new scale to measure nursing competency for developmental support of preterm infants. Methods: Concept analysis was done with using the Hybrid model of Schwartz-Barcott and Kim (2000), from which a preliminary new scale (30 items) was developed. To test the validity and reliability of the new scale being developed, data were collected from 122 NICU nurses at 4 hospitals in 3 cities in the Republic of Korea, from December, 2014 to March, 2015. Results: The final version of the Developmental Support Competency Scale for Nurses (DSCS-N) caring for premature infants was a 4-point Likert type scale, consisting of 19 items, and categorized as 6 factors, explaining 62.5% of the total variance. Each of the factors were named as follows; 'environmental support' (4 items), 'parental support' (3 items), 'interaction' (3 items), 'critical thinking' (3 items), 'professional development' (3 items), and 'partnership' (3 items). The Cronbach's ${\alpha}$ coefficient for the scale was .83 and the reliability of the subscales ranged from .60~.76. Conclusion: The psychometric evaluation of the new scale demonstrated an acceptable validity and reliability. Findings indicate that the DSCS-N can be used as the tool to test the effect of educational programs for nurses and contribute to advance developmental care for preterm infants.

• Journal of the Korean Geographical Society
• /
• v.51 no.3
• /
• pp.421-439
• /
• 2016

Global society is shifting and now evolving towards glocalization, meaning the increasing role of region and multi scalar interactions between region and global social world. In this glocalization era, there has been mushrooming literature and much discussions on the impacts of place-branding and place-marketing on regional development both in academia and practical researches. The inclusive and participatory creative place-making process, however, is more quintessential than the resultant place marketing strategy. This paper tries to reassess the creative place-making based on culture-led regional development perspectives. Specifically it compares Korea and Japan's strategies and suggests a hybrid model of place-making-branding-marketing, utilizing cultural content industries. It then stresses the importance of building a virtuous circle of sustainable regional cultural industrial ecosystem including culture-based interpretation of places and improvement of community quality of life.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.735-737
• /
• 2017

An Off grid or remote solar electric systems are an energy supply to our home or to our companies without the utility of Grid at all. Off grid solar systems are very important for those who live in remote locations especially for developing countries where getting the electric grid is extremely expensive, inconvenient or for those who doesn't need to pay a monthly bill with the electric bill in general. The main critical components of any solar power system or renewable energy harvesting systems are the energy storage systems and its charge controller system. Energy storage systems are the essential integral part of a solar energy harvesting system and in general for all renewable energy harvesting systems. To provide an optimal solution of both high power density and high energy density at the same time we have to use hybrid energy storage systems (HESS), that combine two or more energy storage technologies with complementary characteristics. In this present work, design and simulation we use two storage systems supercapacitor for high power density and lithium based battery for high energy density. Here the system incorporates fast-response supercapacitors to provide power to manage solar smoothing and uses a battery for load shifting. On this paper discuss that the total energy throughout of the battery is much reduced and the typical thermal stresses caused by high discharge rate responses are mitigated by integrating supercapacitors with the battery storage system. In addition of the above discussion the off grid solar electric energy harvesting presented in this research paper includes battery and supercapacitor management system, MPPT (maximum power point tracking) system and back/boost convertors. On this present work the entire model of off grid electric energy harvesting system and all other functional blocks of that system is implemented in MATLAB Simulink.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.6
• /
• pp.451-459
• /
• 2010

This paper describes the performance comparison results for a hybrid back-to-back converter, which is composed of a 3-level 24-pulse converter and a 3-level PWM converter, in order to interconnect a large scale wind farm with the power grid. Also it describes the performance comparison results when the 24-pulse converter operates in only firing-angle control, and both firing-angle and the zero-voltage control. For the purpose of systematic performance comparison, computer simulations with PSCAD/EMTDC software were carried out, and based on simulation results a scaled hardware model with 2 kVA rating was built and tested.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8B
• /
• pp.1424-1435
• /
• 2000

A bit-rate controller that can achieve a constant bit rate when coding object-based video sequences is an important part to achieve an adaptation to bit-rate constraints, desired video quality, distribution of bits among objects, relationship between texture and shape coding, and determination of frame skip or not. Therefore we design content-based bit rate controller which will be used for relevant bit-rate control. The implementation is an extension of MPEG-4 rate control algorithm which employs a quadratic rate-quantizer model. The importance of different objects in a video is analyzed and segmented into a number of VOPs which are adaptively bit-allocated using the object-based modelling. Some test sequences are observed by a number of non-experts and interests in each object are analysed. The initial total target bit-rate for all objects is obtained by using the proposed technique. Then the total target bits are jointly analyzed for preventing from overflow or underflow of the buffer fullness. The target bits are distributed to each object in view of its importance, not only of statistical analysis such as motion vector magnitude, size of object shape, and coding distortion of previous frame. The scheme is compared with the rate controller adopted by the MPEG-4 VM8 video coder by representing their statistics and performance.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.2
• /
• pp.69-76
• /
• 2013

Reader-to-reader interference in RFID system is occurred due to the use of limited number of frequencies, and this is the main cause of read rate reduction in the passive RFID tags. Therefore, in order to maximize the read rate under the circumstances of limited frequency resources, it is necessary to minimize the frequency interference among RFID readers. This paper presents a hybrid FDM/TDM constraint satisfaction problem models for frequency interference minimization problems of the RFID readers, and assigns optimal channels to each readers using conventional backtracking search algorithms. A depth first search based on backtracking are accomplished to find solutions of constraint satisfaction problems. At this moment, a variable ordering algorithm is very important to find a solution quickly. Variable ordering algorithms applied in the experiment are known as efficient in the graph coloring. To justify the performance of the proposed constraint satisfaction problem model, optimal channels for each readers in the passive UHF RFID system are allocated by using computer simulation satisfying various interference constraints.

• Publications of The Korean Astronomical Society
• /
• v.21 no.2
• /
• pp.87-94
• /
• 2006

The COREA (COsmic ray Research and Education Array in Korea) project aims to build a ground array of particle detectors distributed over Korean Peninsular, through collaborations of high school students, educators, and university researchers, in order to study the origin of ultra high energy cosmic rays. COREA array will consist of about 2000 detector stations covering several hundreds of $km^2$ area at its final configuration and detect electrons and muons in extensive air-showers triggered by high energy particles. During the intial phase COREA array will start with a small number of detector stations in Seoul area schools. In this paper, we have studied by Monte Carlo simulations how to select detector sites for optimal detection efficiency for proton triggered air-showers. We considered several model clusters with up to 30 detector stations and calculated the effective number of air-shower events that can be detected per year for each cluster. The greatest detection efficiency is achieved when the mean distance between detector stations of a cluster is comparable to the effective radius of the air-shower of a given proton energy. We find the detection efficiency of a cluster with randomly selected detector sites is comparable to that of clusters with uniform detector spacing. We also considered a hybrid cluster with 60 detector stations that combines a small cluster with ${\Delta}{\iota}{\approx}100m$ and a large cluster with ${Delta}{\iota}{\approx}1km$. We suggest that it can be an ideal configuration for the initial phase study of the COREA project, since it can measure the cosmic rays with a wide range energy, i.e., $10^{16}eV{\leq}E{\leq}10^{19}eV$, with a reasonable detection rate.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.213-223
• /
• 2009

In geoid modelling field, it is very important the GPS/leveling data because it could be check-out the accuracy of gravimetric geoid and computed the hybrid geoid. In this study, GPS surveying was accomplished in the test area including mountainous area to improve the GPS/leveling data density in Korea. And the geometric geoidal heights was calculated using the GPS/leveling data in the test area and the accuracy of the geoidal heights was analyzed. For this study, GPS surveying was accomplished on the 211 1st and 2nd order benchmarks in Gyeongbuk province and 198 GPS/leveling data were achieved after both baseline analysis and network adjustment. Geometric geoidal heights were calculated using these 198 GPS/leveling data and the accuracy analysis was done by comparison with the geoidal heights from EGM2008 geopotential model. The results showed that the bias and standard deviation computed from 190 GPS/leveling data after gross removal was -0.185$\pm$0.079m. And also, the accuracy analyses according to the benchmark order, baseline length, and altitude were accomplished.