• 신재생에너지
• /
• 제3권2호
• /
• pp.60-67
• /
• 2007

This paper describes the design and integration of the wind-fuel cell hybrid system. The hybrid system components included a wind turbine, an electrolyzer (for generation of H2), a PEMFC (Proton Exchange Membrane Fuel Cell), hydrogen storage tank and BOP (Balance of Plant) system. The energy input is entirely provided by a wind turbine. A DC-DC converter controls the power input to the electrolyzer, which produces hydrogen and oxygen form water. The hydrogen used the fuel for the PEMFC. Hydrogen may be produced and stored in high pressure tank by hydrogen gas booster system. Wind conditions are changing with time of day, season and year. So, wind power is a variable energy source. The main purpose with these WT-FC hybrid system is to store hydrogen by electrolysis of water when wind conditions are good and release the stored hydrog en to supply the fuelcell when wind is low.

• 드라이브 ㆍ 컨트롤
• /
• 제16권2호
• /
• pp.80-90
• /
• 2019

Fuel cell hybrid electric vehicle is an attractive solution to reduce pollutants, such as noise and carbon dioxide emission. This study presents an approach for energy management and control algorithm based on energetic macroscopic representation for a fuel cell hybrid electric vehicle that is powered by proton exchange membrane fuel cell, battery and supercapacitor. First, the detailed model of the fuel cell hybrid electric vehicle, including fuel cell, battery, supercapacitor, DC-DC converters and powertrain system, are built on the energetic macroscopic representation. Next, the power management strategy was applied to manage the energy among the three power sources. Moreover, the control scheme that was based on back-stepping sliding mode control and inversed-model control techniques were deduced. Simulation tests that used a worldwide harmonized light vehicle test procedure standard driving cycle showed the effectiveness of the proposed control method.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2005년도 춘계학술발표회 및 정기총회 2권1호(통권2호)
• /
• pp.52-66
• /
• 2005

Tension and Membrane have the potential to enable the realization of lightweight structures that have the attractive features of structures efficiency and aesthetical expression. Compared with pure (thorough-bred) tension structures such as cable net, air dome and tensegrity, so called hybrid tension structures such as beam string, tensegric system and other mixed structures have Potential still to be realized. After synnaruzubg the simple definition of tensegric structure, some holistic designs for hybrid tension structures completed recently in the author's practice are given.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2010년도 정기 학술발표대회
• /
• pp.101.1-101.1
• /
• 2010

빗물과 생활하수를 이용하여 재이용수로 활용하는 방법은 각각 연구가 되어 있다. 하지만 그 두가지를 합쳐서 사용하는 연구는 현재까지 미흡하며, 본 연구에서 사용된 기술(Hybrid-MBR, 이하 HMBR)을 활용해서 중수 수질기준에 맞도록 Blending하는 실험을 하였다. 고도처리를 할 경우 운전이나 장치상의 문제로 수질오염이 생길 수 있는 것을 본 실험해서 사용한 blending을 이용하여 수질 오염을 방재할 수 있다.

• 멤브레인
• /
• 제23권1호
• /
• pp.80-91
• /
• 2013

$Fe(SO_4)_2$, cyclohexanedione dioxime, phenylboronic acid을 이용하여 금속 템플레이트 중합을 실시한 후 메탄올로 세척하여 Fe(II) clathrochelate 화합물을 합성하였다. Fe(II) clathrochelate와 polyethersulfone을 이용한 유무기 복합 멤브레인을 제조하였다. 멤브레인 제조를 위하여 Fe(II) clathrochelate는 DMF, NMP, DMAC와 같은 멤브레인 제조에 이용되는 극성 아프로틱 용매에 잘 녹는 물질로 고안되었다. Fe(II) clathrochelate는 trifluorosactic acid와 같은 강산 존재하에서도 금속이 분리되지 않고 안정성이 유지되었다. UV-vis 분광법으로 용액 가용성을 확인하였으며 (i) 강산 및 (ii) 경쟁 킬레이트제를 이용하여 용액상의 안정성을 확인하였다. 유무기 복합막은 PES, PVP, TSA, Fe(II) clathrochelate를 DMF에 녹여 NIPS (비용매 유도 상전이) 방법으로 제조하였다. Fe(II) clathrochelate의 첨가는 표면의 기공 밀도의 향상, 평균기공 크기의 증가 및 유량 증가에 영향을 주었으며 상대적으로 비대칭 구조를 가지는 성능이 향상된 멤브레인을 얻을 수 있었다.

• 멤브레인
• /
• 제23권1호
• /
• pp.61-69
• /
• 2013

고도정수처리를 위한 관형 세라믹 정밀여과와 이산화티타늄($TiO_2$) 광촉매 첨가 PES (polyethersulfone) 구의 혼성공정에서 유기물질의 영향 및 정밀여과(MF), PES 구 흡착, 광산화의 역할을 막오염에 의한 저항($R_f$) 및 투과선속(J), 총여과부피($V_T$)를 통해서 비교 및 고찰하였다. 휴믹산의 농도가 증가함에 따라 급격한 막오염으로 인해 $R_f$는 증가하고 J는 감소하였으며, $V_T$는 휴믹산의 농도가 2 mg/L인 조건에서 가장 높았다. 광산화와 흡착의 영향을 알아보기 위해 휴믹산의 농도 4 mg/L와 6 mg/L에서의 결과를 비교하였다. 두 가지 조건에서 공통적으로 정밀여과(MF)만의 단독공정에서 막오염이 급격하게 진행되어 $R_f$값이 가장 높게 나타났고, 총여과부피($V_T$)는 광촉매와 자외선의 혼성공정(MF + $TiO_2$ + UV)에서 가장 높은 값을 나타내었다. 탁도와 유기물질의 평균처리효율은 MF + $TiO_2$ + UV 공정에서 가장 높은 값을 나타내었다.

• 상하수도학회지
• /
• 제24권3호
• /
• pp.287-293
• /
• 2010

In this study, the toluene gas in VOCs was removed using bioreactor which applied with hollow fiber membrane and Pseudomonas sp. TDB-4. The EBRT of each reactor are controlled 60 sec(R-1) and 30 sec(R-2) and inlet tolune concentration of both R-1 and R-2 is controlled from 25ppm to 500 ppm. Up to 500 ppm of toluene concentration, the toluene removal efficiency of R-1 and R-2 are 92% and 81%, and theirs removal capacities are about 100 g/$m^3$/hr and 180 g/$m^3$/hr, respectively. In addition, according to this study, toluene removal efficiencies at the hollow fiber are approximately 70%(60 sec) and 45%(30sec).

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.225-226
• /
• 2013

Existing polyurethane membrane waterproofing has been raised defects such as heaving. Therefore, We will be utilizing as the basic experimental data by the water vapor permeability test to the air cell structure of ultra rapid harding membrane waterproofing using the static mixing system in this study.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.147-147
• /
• 2010

An electrolyte membranes for high temperature/low humidity is a demand for the proton exchange membrane fuel cells (PEMFCs). In this work, we prepared hybrid membranes, which have novel glass content in the hydrophilic and hydrophobic part of sulfonated poly(arylene ether sulfone) (SPAES) by in-situ sol-gel synthesis of various functional silane. The effect of silicate from functional silane content on the proton conductivity, water uptake of the hybrid membranes under high temperature and low humidity was quantitatively identified. The silicate content contributed to the enhancement of not only proton conductivity, but also water retention ability for PEMFCs operation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.42-45
• /
• 2003

Inorganic polymer based hybrid membranes consisting of zirconium oxide and polydimethylsiloxane (PDMS) have been synthesized by sol-gel processes. The hybrid membranes showed thermal stability and flexibility up to $300^{\circ}C$. The membrane becomes proton conducting polymer electrolyte when added with 12-phosphotungstic acid (PWA). The conductivity of the membranes was measured in the temperature range from room temperature to $150^{\circ}C$ under saturated humidity and a maximum conductivity of $5{\times}10^{-5}\;Sm^{-1}$ was obtained at $150^{\circ}C$.