• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권1호
• /
• pp.39-42
• /
• 2005

Though full 3D analysis is the proper method to analyze the hybrid stepping motor (HSM), it has weak points in the areas of computation time and complexity. This paper introduces 2D FEA using a virtual magnetic barrier for the axial cross section to save computation time. For the purpose of 2D FEA, the virtual magnetic barrier and equivalent permanent magnet model of HSM are proposed. This result is compared with that of experimental and 3D analysis, considered as a reference result.

• Steel and Composite Structures
• /
• 제24권3호
• /
• pp.287-296
• /
• 2017

The buckling capacity of a radially retractable hybrid grid shell in the closed position was investigated in this paper. The geometrically non-linear elastic buckling and elasto-plastic buckling analyses of the hybrid structure were carried out. A parametric study was done to investigate the effects rise-to-span ratio, beam section, area and pre-stress of cables, on the failure load. Also, the influence of the shape and scale of imperfections on the elasto-plastic buckling loads was discussed. The results show that the critical buckling load is reduced by taking account of material non-linearity. Furthermore, increasing the rise-to-span ratio or the cross-section area of steel beams notably improves the stability of the structure. However, the cross section area and pre-stress of cables pose negligible effect on the structural stability. It can also be found that the hybrid structure is highly sensitive to geometric imperfection which will considerably reduce the failure load. The proper shape and scale of the imperfection are also important.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.62-67
• /
• 2002

It has been shown that the vibrational response of a tire can be represented by a set of decaying waves, each associated with a particular cross-sectional mode shape in the region near the contact patch. Thus, it can be concluded that tires can be effectively modeled as lossy waveguides. It has also been shown that the sound radiation from tires is mainly from the region close to the contact patch. In consequence, it may be computationally efficient to analyze tire vibration and sound radiation in the region close to the contact patch by using a hybrid finite element model in which the cross-section of a tire is approximated by 2-D finite elements while an analytical wave solution is assumed in the circumferential direction of the tire. In this article. a hybrid finite element was formulated based on a composite shell model. The dispersion relations for sample structures obtained by using the hybrid FE model were then compared with those obtained by using a full, three-dimensional FE model. It has been shown that the FE analysis made using the hybrid 2-D finite elements yields results in close agreement with the three-dimensional model.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권4호
• /
• pp.341-349
• /
• 2013

This paper considers the optimum design of flexbeam cross-sections for a full-scale bearingless helicopter rotor, using an efficient hybrid optimization algorithm based on particle swarm optimization, and an improved genetic algorithm, with an effective constraint handling scheme for constrained nonlinear optimization. The basic operators of the genetic algorithm, of crossover and mutation, are revisited, and a new rank-based multi-parent crossover operator is utilized. The rank-based crossover operator simultaneously enhances both the local, and the global exploration. The benchmark results demonstrate remarkable improvements, in terms of efficiency and robustness, as compared to other state-of-the-art algorithms. The developed algorithm is adopted for two baseline flexbeam section designs, and optimum cross-section configurations are obtained with less function evaluations, and less computation time.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.832-837
• /
• 2008

A modeling method for the modal analysis of a multi-packet blade system having tapered cross section undergoing rotational motion is presented in this paper. Blades are idealized as tapered cantilever beams that are fixed to a rotating disc. The stiffness coupling effects between blades due to the flexibilities of the disc and the shroud are modeled with discrete springs. Hybrid deformation variables are employed to derive the equations of motion. To obtain more general information, the equations of motion are transformed into dimensionless forms in which dimensionless parameters are identified. The effects of the dimensionless parameters including tapered ratio and the number of packets as well as blades on the modal characteristics of the system are investigated with some numerical examples.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권1호
• /
• pp.36-44
• /
• 2019

본 연구의 목적은 강 - PC 복합모듈 골조를 구성하는 프레스 성형된 비대칭 기둥과 보 접합부의 구조적 성능을 평가하는 것이다. 모듈러 골조를 구성하는 대부분의 접합부는 폐쇄형의 사각형 강재 기둥 단면을 주로 사용한다. 폐쇄형의 기둥 단면을 사용한 기둥-보 접합부는 시공성을 감소시키고 내화성을 확보하는데 어려움이 있다. 이러한 단점을 극복하기 위하여 강판을 프레스로 성형하여 비대칭 개방형 단면 내에 콘크리트를 충진하는 것이다. 프레스 성형된 비대칭 기둥-보 접합부의 구조적 성능을 조사하기 위해 총 4개의 실험체를 제작하였다. 실험결과, 비대칭 기둥의 구조적 성능과 거동이 비대칭 기둥 단면이 합성되는지 또는 기둥의 폭-두께 비율에 따라 달라지는지를 보여주었다. 프레스 성형된 비대칭 기둥-보 접합부의 구조적 성능은 실험결과와 이론식을 비교하여 평가하였다.

• 대한기계학회논문집B
• /
• 제20권5호
• /
• pp.1613-1623
• /
• 1996

In this paper, two discretization methods, hybrid and QUICK, are tested for the Navier-Stokes equations written in general nonorthogonal body fitted coordinates. Comparison is made by calculating two laminar flows at low Reynolds numbers of 10 - 100. One is a two-dimensional channel of gradually expanding cross section and the other is an axisymmetric flow through a circular tube having a circular constriction. Results show that the QUICK scheme results in a numerical solution more accurate than that of hybrid. The QUICK scheme also shows faster convergence for both test cases. As the number of grid points increases, all numerical solutions converge with more oscillation. The number of grid points in the y-direction(cross stream direction) is also shown to play a significant role in the approximation of convection term within separated flow zone.

• Composites Research
• /
• 제19권1호
• /
• pp.29-35
• /
• 2006

첨단 전자무기체계의 지속적인 발전으로 인하여 현대전의 승패는 적 레이더 탐지의 회피에 크게 좌우된다고 할 수 있다. 반사되는 레이더의 탐지신호를 최소화시키기 위한 다양한 연구가 수행되어 왔는데, 본 연구에서는 뛰어난 기계적, 전자기적 물성으로 응용분야가 지속적으로 확대되고 있는 섬유강화 복합재료를 이용하여 레이더 전자파 흡수체(Radar absorbing structure, RAS)를 제작하고 레이더 단면적(Radar cross section, RCS)을 평가하였다 유리섬유 복합재에 뛰어난 유전적 특성을 지닌 나노 크기의 카본블랙(Carbon-black)을 첨가하여 흡수층을 구성하고, 반사특성이 탁월한 탄소섬유 복합재를 후면의 반사층으로 배치하여 "C" 및 "U" 형상의 하이브리드 복합재 RAS 겔을 제작하였다. RAS 쉘의 제작간 서로 다른 두 재료의 열적물성치 차이로 스프링 백이라 불리는 변형이 발생하였는데, 금형의 굽힘각도 제어를 통하여 효과적으로 보정할 수 있었다. 또한 상용 유한요소해석 프로그램인 ANSYS를 이용하여 스프링 백 보정 결과를 예측하고 실험결과와 비교하였다. 제작된 RAS쉘의 RCS는 근사적 계산기법인 물리광학법을 이용하여 예측하고 컴팩트 레인지(Compact range)를 이용하여 측정한 실힘결과와 비교하였다 두가지 형상의 RCS 모두 측정결과와 예측된 RCS 값이 일치하며 우수한 레이더 전자파 흡수 특성을 지닌 것을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제49권5호
• /
• pp.996-1005
• /
• 2017

In this paper, nuclear data for cross sections of the $^{64}Zn(n,2n)^{63}Zn$, $^{64}Zn(n,3n)^{62}Zn$, $^{64}Zn(n,p)^{64}Cu$, $^{66}Zn(n,2n)^{65}Zn$, $^{66}Zn(n,p)^{66}Cu$, $^{67}Zn(n,p)^{67}Cu$, $^{68}Zn(n,p)^{68}Cu$, and $^{68}Zn(n,{\alpha})^{65}Ni$ reactions were studied for neutron energies up to 40 MeV. In the nuclear model calculations, TALYS 1.6, ALICE/ASH, and EMPIRE 3.2 codes were used. Furthermore, the nuclear data for the (n,2n) and (n,p) reaction channels were also calculated using various cross-section systematics at energies around 14-15 MeV. The code calculations were analyzed and obtained using the different level densities in the exciton model and the geometry-dependent hybrid model. The results obtained from the excitation function calculations are discussed and compared with literature experimental data, ENDF/B-VII.1, and the TENDL-2015 evaluated data.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.361-363
• /
• 2007

The light weight aluminum subframe for automobile chassis part was developed using hybrid process, i.e. extruforming, press stamping and MIG welding. To achieve a 30 % weight reduction compared with conventional steel subframe keeping satisfactory performance, the design of cross-section of extruforming part was introduced, then forming simulation was performed and the final design was determined. In addition, we tried to estibilish optimun aluminum welding conditions for good penetration depth and few pore defact, finally the prototype of aluminum subframe was assembled using MIG welding method.