• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.379-380
• /
• 2007

• 제어로봇시스템학회지
• /
• 제2권6호
• /
• pp.21-29
• /
• 1996

본 논문의 구성은 2장에서는 밝기 분포로부터의 형상복구(Shape from shading)의 한 방법인 고전적인 Photometric stereo mehtod에 대해서 개략적으로 고찰해 보고 3장, 4장에서는 혼성반사모델(Hybrid reflectance model)을 기반으로 하는 2종류의 확장된 Photometric stereo 방법에 대해 설명하고, 각 경우에 대한 시뮬레이션 결과를 2.5차원 및 3차원 형상으로 보이고 고찰한다. 5장에서는 결론 및 고찰에 대해서 언급하고 논문을 마친다.

• 전자공학회논문지B
• /
• 제33B권4호
• /
• pp.91-99
• /
• 1996

A hybrid approach employing both the genetic algorithm and the newton-raphson method is proposed for the electrical impedance computed tomography (EICT) image reconstruction. Computational experiments based on the new concept have shown promising results for several noise-free models. In particular, the resistance distribution of the tested models having resistivity ratio up to 100:1 has been reconstructed sucessfully. Using the proposed mehtod, it is also possible to get the reconstruction by the conventional iterative approaches be difficult to vonverge to a robust solution. If the compution power is enhanced further, the proposed method is expected to stimulate the practical applications of the EICT technology in the near future.

• 대한전자공학회논문지
• /
• 제25권4호
• /
• pp.447-452
• /
• 1988

This paper proposes a hybrid image coding in order to improve the coding performance by combining the BTC with the DPCM. And utilizing the human perceptual characteristics, a new objective image quality evaluation method has been proposed to obtain an excellent result in good agreement with the subjective quality evaluation. A hyb-1 method consisting of the DPCM and the AMBTC has retained a good picture quality at the bit rate of 1.5 bits/pel. A hyb-3 method combining the EBTC-3 with the DPCM has scarcely degraded the picture quality compared with the original image at the bit rate of 2.1 bits/pel. A newly proposed mehtod of picture quality evaluation accumulating a blocky noise at the edge block and an impulsive noise at the flat block selectively has been coincident with the subjective evaluation of quality.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.477-478
• /
• 2013

This paper presents the control mehtod of a photovoltaic(PV) hybrid generation with energy storage system(ESS). To stabilize power control between PV generation system with ESS and local load, the proposed control method performs grid-connected and islanding operations. Through the simulation results the theoretical analysis of proposed method is verified.

• 한국주조공학회지
• /
• 제28권6호
• /
• pp.256-260
• /
• 2008

The Hybrid-Lower Arm, which has been developed for reducing cost and weight, was produced by three kinds of casting methods such as the high-pressure diecasting(HPDC), the squeeze casting(SC), and the H-NCM rheocasting process. The important factors for development of the Hybrid-Lower Arm are the integral feeding in Al casting for heat treatment and the high joinning ratio between the steel part and the Al part. In this study, effects of these casting processes on the quality of Hybrid-Lower Arm were investigated. Compared with HPDC and squeeze casting, the rheocasitng process using the H-NCM slurry had some advantages in joinning different materials of Al and steel pipe without deforming the steel pipe. X-ray analysis also showed the poreless microstructure in semisolid Hybrid-Lower Arm. In the torsion stress test, semisolid Hybrid-Lower Arm was satisfied with the requirements of automobile standard.