• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.546-547
• /
• 2009

To ensure stability of continuous welded rail in extremely hot weather is important to the railway industry's goal of operational safety and maintenance. Rail temperature has direct influence on track buckling. According to climate condition, distribution of rail temperature is different. In this study, the fluctuation of rail temperature were investigated under the domestic climate condition (air temperature, humidity, insolation, etc)

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.479-482
• /
• 2004

Laminate Design of a composite tube for a space telescope(Fig. 1) under hygrothermal load is studied. Carpet plots for laminate effective engineering constants are generated and used for selecting the best tube lay-ups satisfying the optomechanical requirements for a space telescope being dimensional1y stable under orbital thermal loading. Despace of the tubes constructed with the selected lay-ups are calculated with a Zig-Zag Triangular Element which accurately represents through thickness stress variations for laminated structures. The effects of moisture absorption when exposed to humidity environment and moisture desorption through outgassing on the dimensional stability are also investigated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.814-817
• /
• 2003

As additive Pt of a little to $SnO_2$ that gas sensing property is superior oxide-semiconductor material to fabricate gas sensor that operation is possible at room temperature and fabricated ceramic gas sensing devices. And, the change amount and sintering temperature of addition material investigated gas sensitivity by change of operation temperature, humidity relativity, Long-term stability and hysteresis. And achieved SEM and XRD analysis for characteristics searching examination of devices.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.215-218
• /
• 2005

In this research, design scheme of fiber Bragg grating(FBG) sensor system for aircraft application is suggested from the results and the know-how from the fon11er researches on structural health monitoring techniques using fiber optic sensors. Design factors to be taken into consideration were derived for both sensor parts including connection and system parts. For the stability of FBG sensor system, design requirements of temperature, vibration, humidity, electromagnetic interference were presented from U. S. military standards. The direction of software programming which increases stability and perfon11ance of the aircraft with the FBG sensor system was also examined.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.3
• /
• pp.5-11
• /
• 1996

It has been reported that acetylation reduces the sorption of wood, thereby increasing the stability of the acoustic and dimensional properties of wood under conditions of changing humidity. Bamboos used for making a Korean traditional flute were acetylated and their dimensional properties were evaluated by measuring Weight Percent Gain and thickness swelling in water. Before acetylation bamboos were vacuum-dried to 3~6% at $50{\sim}80^{\circ}C$ without degradation. The optimum reaction temperature and time for bamboo acetylation were found to be $120^{\circ}C$ and 8 hours, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.3
• /
• pp.204-208
• /
• 2012

$TiO_2$ ($Ti_{1-x}Nb_xO_2$, x= 0.04~0.06) transparent conducting oxide film was fabricated by RF magnetron sputtering process and their electrical, optical, stability properties were studied. When the Nb 4 at% sputtering target was used with RF power 120 W, pressure 8 mTorr, post-annealing temperature $600^{\circ}C$, the resistivity of TNO film was $4{\times}10^{-4}\;{\Omega}-cm$. The optical transmittance in the visible wavelength was ca. 86%. TNO films require heat treatment during or after the deposition process. When the film was deposited at room temperature and post-annealed at $600^{\circ}C$, the lowest resistivity was obtained. When the TNO film was exposed to high temperature and humidity, the resistivity of the film was rather decreased. The stability to temperature and humidity implies that the TNO film could be a appropriate candidate for In-free, ZnO-free transparent conducting oxide materials.

• Food Science and Preservation
• /
• v.5 no.1
• /
• pp.7-12
• /
• 1998

Chestnuts(Castanea cretana, Eunki) were used for quality evaluations from the physiological and physicochemical points of view during storage under different temperatures and relative humidities for 8 months. Quality criteria included spouting, rotting, weight loss, and the changes in moisture, total sugar, reducing sugar, and total vitamin C of the stored sample. Sprouts(roots) were developed in about 2 months in all stored samples which had been mixed with sawdust(50% moisture) and stored under the conditions of 2∼25$^{\circ}C$ and 62∼95% RH. The sprout development was more significant in the storage temperature of Pit(9${\pm}$6$^{\circ}C$, 80${\pm}$5% RH, PT)and room(16${\pm}$7$^{\circ}C$, 85${\pm}$10% RH, RT) than low(3${\pm}$1%, 80${\pm}$5% RH, LT)and ambient(14${\pm}$11$^{\circ}C$, 67${\pm}$5% RH, AT). The rates of rotting and weight loss were appreciable in the order of PT, AT, RT and LT, and those of LT were 1∼2%. The use of wet sawdusts resulted in the increase of moisture contents in stored samples, thereby causing the rotting phenomena. Some chemical components of stored samples were found liable to the changes according to storage conditions, that is; total sugars showed a decreasing tendency along with a temporary increase during storage, and both reducing sugar and vitamin C were similarly accumulated in the samples stored at low temperature conditions. The results indicated that long-term storage of chestnuts will be possible in either cases of the application of low temperature following sprout-inhibition treatment or the use of lower temperature than 0$^{\circ}C$ to suppress its sprouting during storage.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.5
• /
• pp.407-411
• /
• 2004

New formulations of amlodipine maleate tablet have been investigated to enhance the stability of the drug against light and humidity. Three kinds of amlodipine maleate tablets were prepared. One is prepared by previously known formulation (formulation C), the others were by new formulations using hydrophilic polymer $(Opadry^{\circledR})$ coated granules (formulations A and B). Amlodipine maleate powder was coated with $Opadry^{\circledR}$ to produce the coated granules and it was mixed with other excipients to produce the tabletting mass of new formulations A and B. Dissolution rate of newly formulated tablets was over 80% within 10 minutes in 0.01 M HCl medium, and its dissolution pattern was similar to that of $Norvasc^{\circledR}$ tablet. After 6 months storage under accelerated conditions, residual drug contents of tested formulations (A and B) were not significantly different from formulation C, ranging from 96.2 to 100.4%. Meanwhile, dissolution amount of formulation C was significantly reduced compared to that of formulation A (p<0.05), showing formulation A was more stable than unprotected formulation C at the accelerated conditions. Results of appearance, hardness and disintegration remained unchanged during stability study. In conclusion, it showed that the new formulations had enhanced the stability characteristics and hydrophilic coating technique was an alternative and promising method to improve the stability of amlodipine maleate tablet.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.57-60
• /
• 2020

An acetaldehyde, a representative food waste odor, was decomposed using a hybrid system comprised of a non-thermal plasma and catalyst at an ambient temperature under high humidity. A five wt.% Mn was impregnated on two differently structured microporous zeolites, namely Beta and ZSM-5, with a different molar ratio of SiO₂/Al₂O₃. Under high humidity conditions, the acetaldehyde degradation was higher in zeolites with the high ratio of SiO₂/Al₂O₃. Among studied catalysts, a five wt.% Mn/Beta (SiO₂/Al₂O₃ = 300) showed the highest acetaldehyde removal activity owing to its high hydrophobicity and reducibility. During long term stability test using the same catalyst for 110 hours, the acetaldehyde removal activity was relatively well-maintained.

• Journal of Industrial Technology
• /
• v.3
• /
• pp.87-94
• /
• 1983

Heating characteristics of red pepper paste packed in report pouches of various thicknesses and their storage stability were investigated to determine the adequate processing conditions that good bacteriological safty and minimal quality changes could be obtained, when sterilized by using a steam-air system retort. A heat penetration into pouch-packed red pepper paste was carried out through by a conductive heat transfer, indicating a simple logarithmic heating curve, and the smaller thickness revealed the higher heat penetration rate, suggesting the possibility of high temperature-short time sterilization of red pepper paste. The processing conditions with Fo-value of 4.5 or higher were sufficient for keeping up bacterial safty, but based on C-value, better quality retention was obtained at pouch thickness of 15mm under the processing temperature of $120^{\circ}C$. Subsequent storage study revealed that the red pepper paste packed in 15mm and processed at $120^{\circ}C$ with Fo=4.5 could be held without any spoilage and overall acceptance change, when stored for 6 months at room temperature under the relative humidity of 70%. After 3 months storage in $38^{\circ}C$ under saturation humidity, overall acceptance of red pepper paste were judged not to be maintainable on the acceptable level, but it may be suggested that above the results could be kept up a desirable quality without any remarkable deterioration.