• The KSFM Journal of Fluid Machinery
• /
• v.19 no.2
• /
• pp.27-35
• /
• 2016

The purpose of this study is to develop a method to predict the performance and economics of a micro gas turbine cogeneration system using performance correction curves. The variables of correction curves are ambient temperature, ambient pressure, relative humidity and load fraction. All of the values of correction factors were expressed as relative values with respect to design values at the ISO conditions. Once the correction curves are obtained, system performance can be predicted relatively easily compared to a detailed performance analysis method through a simple multiplication of the correction factors of various variables at any operating conditions. The predicted results using the correction curve method were compared with those by the detailed and more complex performance analysis in a wide operating range, and its feasibility was confirmed. To illustrate the usability of the correction curve method, the results of an economic analysis of a cogeneration system considering varying operating ambient condition and load was presented.

• Journal of Environmental Health Sciences
• /
• v.43 no.6
• /
• pp.478-490
• /
• 2017

Objectives: The association of air pollution levels and land-use types with changes in the prevalence of allergic diseases (allergic conjunctivitis, allergic rhinitis, asthma, and atopic dermatitis) was investigated for seven metropolitan cities in Korea Methods: Data on daily hospital visits and admissions (of those under 19 years old) for 2003-2012 were obtained from the National Health Insurance Cooperation. Meteorological data on daily mean temperature, humidity, and air pressure were obtained from the Korea Meteorological Administration. Daily mean or maximum concentration data for five pollutants ($PM_{10}$, $O_3$, $NO_2$, $SO_2$, and CO) as measured at air quality monitoring sites operated by the Ministry of Environment were used. We estimated excess risk and 95% confidence intervals for the increasing interquatile range (IQR) of each air pollutant using Generalized Additive Models (GAM) appropriate for time series analysis. Results: In this study, we observed a significant association between the IQR increases of air pollutants and the prevalence risk of allergic diseases (allergic conjunctivitis, allergic rhinitis, asthma, and atopic dermatitis) in all metropolitan cities after adjusting for temperature, humidity, and air pressure at sea level. Among the air pollutants, $NO_2$ and $PM_{10}$ were associated with the prevalence of asthma, and $O_3$ was associated with only allergic conjunctivitis in regression analysis. However, in GAM analysis considering land-use, $O_3$ and $SO_2$ were associated with allergic conjunctivitis, PM10, O3, NO2, and CO were associated with allergic rhinitis, and $PM_{10}$, $O_3$ and $NO_2$ were associated with asthma in industrial area. Conclusion: This study found a significant association between air pollution and the prevalence of allergic related diseases in industrial areas. More detailed research considering mixed traffic-related air pollution (TRAP) and conducting meta-analyses combining data of the all cities is required.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.3
• /
• pp.51-58
• /
• 2018

In this paper, the organic material Poly(methyl methacrylate) PMMA is used with inorganic $Al_2O_3$ to fabricate organic-inorganic multilayer barrier thin films. The organic thin films are developed using a roll-to-roll electrohydrodynamic atomization system, whereas the inorganic are grown using a roll-to-roll low-temperature atmospheric pressure atomic layer deposition system. For the first time, these two technologies are used together to develop organic-inorganic multilayer barrier thin films in atmospheric condition. The films are grown under optimized parameters and classified into three classes based on the layer structures, when the total thickness of the barrier is maintained at ~ 160 nm. All classes of barriers show good morphological, optical and chemical properties. The $Al_2O_3$ films with a low average arithmetic roughness of 1.58 nm conceal the non-uniformity and irregularities in PMMA thin films with a roughness of 5.20 nm. All classes of barriers show a notably good optical transmission of ~ 85 %. The hybrid organic-inorganic barriers show water vapor and oxygen permeation in the range of ${\sim}3.2{\times}10^{-2}g/m^2/day$ and $0.015cc/m^2/day$ at $23^{\circ}C$ and 100% relative humidity. It has been confirmed that it can be mass-produced and used as a low-cost barrier thin film in various printing electronic devices.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.7-13
• /
• 2017

A comfortable indoor environment is important considering that many hours are spent in residential or office space. A humidifier is used to control the indoor humidity. In particular, an element type humidifier has the advantage of a simple structure and low energy consumption. Two types of humidifiers - stationary or rotor - are commonly used for residential purposes. In this study, performance optimization was conducted for a rotor-type humidifying element used in a residential humidifier. The optimization included the rotation speed, water submersion depth, etc. The test range consisted of an open area to the air from 57 to 90%, rotation speed from 0.2 to 2.0 rpm, frontal air velocity from 0.5 to 2.5 m/s. The results showed that the optimal open area to air was 70%. On the other hand, the effects of the rotation speed on the moisture transfer rate was negligible. On the other hand, the pressure drop increased with increasing rotation speed. As the frontal air velocity increased, both the moisture transfer rate and pressure drop increased. The humidification capacity of the present element was 0.08 ~ 0.31 kg/hr. A comparison of the data with the theoretical results was made.

• Korean Journal of Food Science and Technology
• /
• v.4 no.1
• /
• pp.6-12
• /
• 1972

Fay Elberta freestone peaches were harvested at four maturity levels as judged by skin color and firmness. They were ripened at $68^{\circ}F$ under 80 percent relative humidity for 4, 6, 8 and 10 days respectively prior to canning. Results indicate that both harvest maturity and ripening conditions are important factors influencing quality, flavor and composition of canned freestone peaches. Peaches harvested at $18{\sim}24$ pounds on a Magness-Taylor pressure tester with a 7/16' plunger(M1) failed to ripen satisfactorily. Fruits harvested at $13{\sim}17$ pounds (M2) pressure test ripened successfully at $68^{\circ}F$ within 6 to 8 days; and those harvested at 6 to 12 pounds (M3) needed 4 days for ripening at $68^{\circ}F$. Tree-ripened fruits (M4) were undesirable for canning because of the high percentage of bruised fruits. The optimum firmness for canning appears to be in the range of 1.5 to 3.0 pounds. The titratable acidity of peaches decreased during maturation and ripening. The tannin content of peaches at M1 maturity decreased with ripening at $68^{\circ}F$. But no appreciable change was observed in the M2 and M3 series which were ripened at $68^{\circ}F$ for 4 to 10 days. The volatile reducing substances (V.R.S.) increased as the peaches developed on the tree and also during post-harvest ripening. The effect of harvest maturity and post-harvest ripening on color grade of the canned peaches is presented. Little difference was found in the flavor and composition of peaches peeled by the cup-down lye peeling and the steam-peeling methods. The cup-down lye-peeling method might be most advantageous because of its higher peeling efficiency.

• Resources Recycling
• /
• v.20 no.4
• /
• pp.71-77
• /
• 2011

$MoO_3$ powders were reduced to $MoO_2$ under Ar+$H_2$ gas mixture in a tubular furnace at temperature range 723~873 K. Reaction rate was quantitatively deduced by measuring relative humidity of off gas. Observed reaction rate increased significantly with hydrogen partial pressure and reaction temperature and the rate of $H_2O$ evolution increased drastically during the initial period of reduction. As reduction proceeded, however, $H_2O$ partial pressure decreased noticeably. During the initial period of the reduction, a linear relationship for time dependence of the reduction fraction was observed. The activation energy for the reduction of $MoO_3$ to $MoO_2$was 73.56 kJ/mol during the initial period of reduction.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.3
• /
• pp.418-429
• /
• 2018

Measurements of 24-hr size-segregated ambient particles were made at an urban site of Gwangju under high pressure conditions occurred in the Korean Peninsula late in March 2018. The aim of this study was to understand the effect of air stagnation on mass size distributions and formation pathways of water-soluble organic and inorganic components. During the study period, the $NO_3{^-}$, $SO_4{^{2-}}$, $NH_4{^+}$, water-soluble organic carbon (WSOC), and humic-like substances(HULIS) exhibited mostly bi-modal size distributions peaking at 1.0 and $6.2{\mu}m$, with predominant droplet modes. In particular, outstanding droplet mode size distributions were observed on March 25 when a severe haze occurred due to stable air conditions and long range transport of aerosol particles from northeastern regions of China. Air stagnation conditions and high relative humidity during the study period resulted in accumulation of primary aerosol particles from local emission sources and enhanced formation of secondary ionic and organic aerosols through aqueous-phase oxidations of $SO_2$, $NO_2$, $NH_3$, and volatile organic compounds, leading to their dominant droplet mode size distributions at particle size of $1.0{\mu}m$. From the size distribution of $K^+$ in accumulation mode, it can be inferred that in addition to the secondary organic aerosol formations, accumulation mode WSOC and HULIS could be partly attributed to biomass burning emissions.

• Journal of Astronomy and Space Sciences
• /
• v.12 no.1
• /
• pp.123-132
• /
• 1995

We developed a S/W system to simulate the orbit tracking data as nearly equal as the real data obtained at the tracking antenna by modeling various causes that could have effects on the tracking data (range, range rate, azimuth, elevation) of an artificial satellite. Using the S/W developed we produced delay values of tracking data due to the light-time effect and the terrestrial atmosphere. According to the simulation results due to the Earth atmosphere, the values delayed by the troposhpere were increased as the temperature, relative humidity, and pressure of the troposphere are more larger. However, delay values due to the ionosphere were dependent on both the maximum electron density and the frequencies used. They are more and more increased as the maximum electron density and frequency are more larger. And the delaying values by the light-time effect are more larger by the fast orbital motion as the altitude of an artificial satellite is more lower.

• Environmental Engineering Research
• /
• v.24 no.1
• /
• pp.159-172
• /
• 2019

To investigate the influence of pollution events on the chemical composition and formation processes of aerosol particles, 24-h integrated size-segregated particulate matter (PM) was collected during the fall season at an urban site of Gwangju, Korea and was used to determine the concentrations of mass, water-soluble organic carbon (WSOC) and ionic species. Furthermore, black carbon (BC) concentrations were observed with an aethalometer. The entire sampling period was classified into four periods, i.e., typical, pollution event I, pollution event II, and an Asian dust event. Stable meteorological conditions (e.g., low wind speed, high surface pressure, and high relative humidity) observed during the two pollution events led to accumulation of aerosol particles and increased formation of secondary organic and inorganic aerosol species, thus causing $PM_{2.5}$ increase. Furthermore, these stable conditions resulted in the predominant condensation or droplet mode size distributions of PM, WSOC, $NO_3{^-}$, and $SO{_4}^{2-}$. However, difference in the accumulation mode size distributions of secondary water-soluble species between pollution events I and II could be attributed to the difference in transport pathways of air masses from high-pollution regions and the formation processes for the secondary chemical species. The average absorption ${\AA}ngstr{\ddot{o}}m$ exponent ($AAE_{370-950}$) for 370-950 nm wavelengths > 1.0 indicates that the BC particles from traffic emissions were likely mixed with light absorbing brown carbon (BrC) from biomass burning (BB) emissions. It was found that light absorption by BrC in the near UV range was affected by both secondary organic aerosol and BB emissions. Overall, the pollution events observed during fall at the study site can be due to the synergy of unfavorable meteorological conditions, enhanced secondary formation, local emissions, and long-range transportation of air masses from upwind polluted areas.

• Journal of Environmental Health Sciences
• /
• v.33 no.4
• /
• pp.283-292
• /
• 2007

Atmospheric concentrations of radon had been continuously observed in Seoul, Korea since December 1999, as a tracer for long-range transport of air pollutants from China continent to Korea. In order to study radon as a tracer of long-range transport, it is important to know information about the atmospheric distribution and variation of radon concentration and its time variation. Atmospheric radon concentration are measured with electrostatic radon monitor(ERM) at Hanyang University located in Eastern area of Seoul. Air sample is taken into a vessel of ERM, and alpha particles emitted by radon daughters $Po^{218}$ are detected with ZnS(Ag) scintillation counter. Hourly mean concentrations and hourly alpha counts are recorded automatically. The major results obtained from time series observation of atmospheric radon were as follows : (1) The mean of airborne radon concentration in Seoul was found to be $7.62{\pm}4.11\;Bq/m^3$ during December $1999{\sim}January$ 2002. (2) The hourly variation of radon concentrations showed the highest in 8:00AM ($8.66{\pm}4.22\;Bq/m^3$) and the lowest in 3:00AM ($6.62{\pm}3.70\;Bq/m^3$) and 5:00AM ($6.62{\pm}3.39\;Bq/m^3$). (3) the seasonal variation of radon concentrations showed higher during winter-to-fall and lower during summer-to-spring. (4) Correlation between airborne radon concentration and the meteorological factors were -0.21 for temperature, 0.09 for humidity, -0.20 for wind speed, and 0.04 for pressure. (5) The mean difference of airborne radon concentration between Asian dust ($5.36{\pm}1.28\;Bq/m^3$) and non-Asian dust ($4.95{\pm}1.49\;Bq/m^3$) phenomenon was significant (p=0.08). We could identify time series distribution of radon concentration related meteorological factors. In addition, radon can be considered a good natural tracer of vertical dispersion and long-range transport.