• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.351-356
• /
• 2011

In this paper, we design a pet location tracking and remote monitoring system that uses ultrasonic, temperature, humidity and illumination sensors to study behavioral patterns and habits. Using ultrasonic waves to calculate distances, a WSN(Wireless Sensor Network) was constructed to transmit data at pet's location, such as temperature, humidity and illumination, to a sink mote. Data received by the system are stored in the database in real time to trace pet's location. Interference among transmitting motes was eliminated by sequentially transmitting RF beacons using sink mote's beacon as the reference signal. Experiments were performed with the laboratory prototype of a pet animal monitoring system implemented for this study. The system analyzes locations of a pet and displays movement patterns, areas of movement, temperature, humidity and illumination using a GUI (graphical user interface).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.2 no.1
• /
• pp.41-47
• /
• 1973

In the present work, the quality stability of sun-dried Alaska pollack, Theragra chalcogramma, was discussed in the aspects of non-enzymatic discoloration as a function of relative humidity during storage at room temperature$(20^{\circ}C)$. Frozen Alaska pollack was dressed, filleted, dried for 48 hours in the open air, and finally stored in cylindrical acrylic chambers which contained saturated specific salt solutions proposed by Rockland(1960) for humidity control. The color development of the product was analyzed by spectrophotometry at 10 day-intervals during the storage. Lipid oxidation was measured as TBA value at wavelength of 538nm. And browning pigments were extracted, divided into two fractions and measured at 460nm: one was chloroform-methanol (2:1 v/v)soluble fraction attributed to lipid oxidation, and the other was water dialyzed fraction caused by so called Maillard reaction. The TBA value showed a maximum on 30 day storage, hereafter, intended to decrease gradually. On the other hand, the rate of brown pigment development in water dialyzed fractions as well as in chloroform-methanol soluble fractions was lower at 34 to 45%RH than at any other case, and propagation of lipid oxidation was also diminished at the same levels of humidity. From the facts described previously, it is recognized that storage at 34 to 45%RH provides higher quality stability for sun-dried Alaska pollack.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.12
• /
• pp.685-688
• /
• 2017

Using ALOHA and PHAST Program, it was modeled assuming the leakage accident scenarios of chlorine which is designated as accident preparation chemical in chemical control act. End-point distances corresponding to ERPG-2 concentrations were calculated while varying annual mean temperature, wind speed, humidity, and atmospheric stability. The calculated endpoint distance values were compared and the correlation with each meteorological factor was analyzed. And we also investigated strengths and weaknesses of ALOHA and PHAST. The results show that ALOHA has little or no correlation with annual average temperature, humidity and it has a large correlation with wind speed and atmospheric stability. In the case of PHAST, the end-point distances were correlated with all the meteorological factors such as average annual temperature, wind speed, humidity, and atmospheric stability, Among them, the effect of atmospheric stability were the largest.

• Food Science and Preservation
• /
• v.9 no.1
• /
• pp.78-84
• /
• 2002

While rice and corn were stored at room temperature for 90 days the degree of aflatoxin production was measured without humidity and temperature control. The amount of aflatoxin production of rice and corn after 30 days was 01.1 and 0.3 ppb, respectively. The degree of aflatoxin production increased rapidly with increasing storage temperature and humidity. The optimum conditions of aflatoxin production were 25 ∼30$\^{C}$ and 80% humidity. The degree of aflatoxin production in corn was higher than in rice under the same conditions. Rice and corn were treated with 0∼0.05%(w/w) of methyl alcohol (MeOH) extract and polyphenol (PP) group materials individually respectively under the optimum conditions. As the result, the inhibition effect of aflatoxin production increased with increasing the amount of treatment. It appeared as follows: catechin (CT)

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.36 no.3
• /
• pp.142-149
• /
• 2013

Among ammunitions which are stored in a war field, the lifespan of propelling gunpowder is affected by storage environment such as storage temperature, humidity, and exposure to sunlight. These are because Nitrocellulose (NC) which is the main component of propelling gunpowder can be naturally disassembled to unstable substances similar with other nitric acid ester. We can't prevent it fundamentally from being disassembled, but to restrain induction of automatic disassembly by decomposition product, a decomposition product ($NO_2$, $NO_3$, and $HNO_3$) and tranquillizer DPA (Diphenylamine), having high reactivity, are added into a propellant. For this, it will decrease the velocity of tranquillizer which can also affect the velocity of producing the decomposition product of NC, storage temperature or humidity of propelling gunpowder is higher, drop of tranquillizer content is much faster. Therefore, to extend storage lifespan of propelling gunpowder, it is really important to control storage temperature or humidity inside the magazine. Hereupon, according to the manufacture of small scale model magazine and the result of performing experiments and measuring variation of inside temperature (storage temperature), using roof types that have a steel slate structure of magazine among ground magazines, this research shows the differences in details.

• Food Science and Preservation
• /
• v.10 no.2
• /
• pp.147-153
• /
• 2003

Quality changes of citrus tangor(Citrus kiyomi) during storage by chitosan and calcium treatment and storage warehouse were investigated. Citrus fruits were treated with 2000-folds diluted iminoctadime-triacetate solution, and 1.5% chitosan with 0.5% CaC1$_2$solution, and were at 30$^{\circ}C$ for 24 hr before storage. The citrus fruits of about 12 kg/26 L plastic container were stored at 4$^{\circ}C$ with 87% relative humidity. Decay ratio of citrus with precise temperature and humidity control were lower than the others during storage. Weight loss, moisture content of peel and flesh were decreased slowly during storage. 15 ∼ 18% of acid content were decreased on 120 days' storage. Vitamin C content were decreased rapidly during storage. 23 free amino acids were detected. Isoleucine and leucine were not detected, but alanine was detected only on stored citrus. Citrus fruits was kept well on its commodity quality for 3 month at 4$^{\circ}C$ with 87% relative humidity.

• Korean Journal of Food Science and Technology
• /
• v.21 no.5
• /
• pp.655-661
• /
• 1989

Optimal drying conditions consisting of air temperature and relative humidity were searched by the simulation-optimization technique for minimizing quality changes in red pepper drying. Optimized drying conditions were analysed in the viewpoint of quality change kinetics and effects of control variables on the state variables. Optimal drying conditions were nearly same in both cases for carotenoid maximization and browning minimization. In two staged optimized drying, relative humidity took a lower search limit of about 10%, and air temperature in the first stage was near the lower limit of $50^{\circ}C$ and in second stage increased to a higher temperature varying with total drying time and stage changing time. Response surface analysis of time invariable drying confirmed the location of the optimal point lying on the vertex of lower limit humidity and a lowest drying temperature which ensures to attain target moisture of 0.2g water/g dry solid. Two stage drying can attain the higher objective function of quality by 3-5% than time invariable drying for shorter total drying times.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.1
• /
• pp.133-152
• /
• 2022

Rice is a fundamental staple food commodity all around the world. Globally, it is grown over 167 million hectares and occupies almost 1/5^th of total cultivated land under cereals. With a total production of 782 million metric tons in 2018. In Pakistan, it is the 2^nd largest crop being produced and 3^rd largest food commodity after sugarcane and rice. The stem borers a type of pest in rice and other crops, Scirpophaga incertulas or the yellow stem borer is very serious pest and a major cause of yield loss, more than 90% damage is recorded in Pakistan on rice crop. Yellow stem borer population of rice could be stimulated with various environmental factors which includes relative humidity, light, and environmental temperature. Focus of this study is to find the environmental factors changes i.e., temperature, relative humidity and rainfall that can lead to cause outbreaks of yellow stem borers. this study helps to find out the hot spots of insect pest in rice field with a control of farmer's palm. Proposed system uses temperature, relative humidity, and rain sensor along with artificial neural network to predict yellow stem borer attack and generate warning to take necessary precautions. result shows 85.6% accuracy and accuracy gradually increased after repeating several training rounds. This system can be good IoT based solution for pest attack prediction which is cost effective and accurate.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.5
• /
• pp.301-314
• /
• 2022

The moisture and dimensional behaviors of a nail-laminated timber (NLT)-concrete slab composed of an NLT-plywood composite and topping concrete are monitored for 385 days. The slab is developed for using as flexural elements such as floors. The humidity control of wood gently introduces significant fluctuations under the ambient relative humidity into the slab, and fluctuations in the relative humidity result in dimensional changes. The equilibrium moisture content of the slab increases from 6.7% to 15.3% during the monitoring period, resulting in a width (radial) strain of 0.58%. The length (longitudinal) strain is negligible, and the height (tangential) strain is excluded from the analysis because of abstruse signal patterns generated. Concrete pouring causes a permanent increase in the width of the NLT-plywood composite. However, the width deforms because the weight of the concrete mixture loosens the nail-laminated structure, not because of the significant amount of moisture in the mixture. The dimensional stabilization effect of the nail-laminated system is demonstrated as the composite strain is lower than the total strain of lumber and plywood, which are elements constituting the nail-laminated structure.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.10
• /
• pp.399-409
• /
• 2006

This paper presents a novel method for satisfying the thermal comfort of indoor environment and reducing the summer peak demand power by minimizing the power consumption for an Air-conditioner within a space. Korea Electric Power Corporation (KEPCO) use the fixed duty cycle control method regardless of the indoor thermal environment. However, this method has disadvantages that energy saving depends on the set-point value of the Air-Conditioner and direct load control (DLC) has no net effects on Air-conditioners if the appliance has a lower operating cycle than the fixed duty cycle. In this paper, the variable duty cycle control method is proposed in order to compensate the weakness of conventional fixed duty cycle control method and improve the satisfaction of residents and the reduction of peak demand. The proposed method estimates the predict mean vote (PMV) at the next step with predicted temperature and humidity using the back propagation neural network model. It is possible to reduce the energy consumption by maintaining the Air-conditioner's OFF state when the PMV lies in the thermal comfort range. To verify the effectiveness of the proposed variable duty cycle control method, the case study is performed using the historical data on Sep. 7th, 2001 acquired at a classroom in Seoul and the obtained results are compared with the fixed duty cycle control method.