• 제목/요약/키워드: Human femur

검색결과 74건 처리시간 0.025초

Zinc Bioavailability in a Semolina/Soy Protein Mixture Was Not Affected by Extrusion Processing

  • Kang, Soo-Young;Wanda L. Chenoweth
    • Nutritional Sciences
    • /
    • 제3권2호
    • /
    • pp.71-76
    • /
    • 2000
  • Effects of extrusion processing on zinc bioavailability in a product made from 85% semolina and 15% soy protein concentrate were determined using in vitro and in vivo techniques. Soluble and dialyzable zinc contents of the extruded product were 15.3 and 13.0 $\mu$g/g, respectively, compared to 15.6 to 15.0$\mu$g/g in the raw (unprocessed) ingredients. Zinc bioavailability in diets in which all of the zinc (14ppm) was provided either by the extruded product or by its raw ingredients was determined in two groups of male Sprague Dawley rats. No differences were found in concentrations of zinc in plasma, liver and femur between rats fed the two experimental diets. Apparent zinc digestibility was similar for both diets. These results are consistent with the in vitro results showing no effect of extrusion processing on zinc bioavailability.

  • PDF

Three-Dimensional Kinematic Model of the Human Knee Joint during Gait

  • Mun, Joung-Hwan;Seichi Takeuchi
    • 대한의용생체공학회:의공학회지
    • /
    • 제23권3호
    • /
    • pp.171-179
    • /
    • 2002
  • 운동 중에 있는 인체 무릎관절의 기능을 이해하기 위한 기구학적(Kinematic) 분석 과 동역학적(Kinetic) 분석을 행하는데 있어서 관절 표면의 기하학이 주요한 역할을 한다는 것은 잘 알려져 있다. 슬관절은 미끄러짐 (sliding)과 구름 (rolling) 운동을 고려하지 않고는 정확하게 모델 될 수 없다 본 연구에서는 미끄러짐 과 회전 운동 그리고 주요 인대 (ligament)를 고려한 3타원 인체 슬관절 모델을 제시한다 본 연구는. 슬관절의 전형적인측 평면 CT 영상의 확장으로부터 얻어진 두개의 캠 측면도를 이용하여 보다 실제에 가까운 관절의 기하학을 이용한 모델을 제시한다 개발된 모델은 보행 중 인체 슬관절을 통한 힘의 전달경로를 예측하는데 있어서 실험을 기초로 한 이전의 결과보고와 비교하여 볼 때 매우 잘 일치한다 대퇴골와 경골 사이의 접촉 점은 무릎의 굽힘이 진행되는 동안 전방에서 후방으로 이동하는데 이것은 무릎의 굽힘과 폄의 운동에 대한 전방/후방 운동의 커플링을 반영한 것이다. 본 연구에서 개발된 모델에 의하면 일회의 보행 사이클동안 경골 표면에 접촉 점의 전방/후방 이동변위는 바깥쪽 관절구 쪽이 약 16 mm 이고. 안쪽 관절구 쪽이 약 25 mm 이다 또한, 일회의 보행 사이클 동안 대퇴골 의 이동변위는 바깥쪽이 약 7 mm 그리고 안쪽이 약 10 mm 이다. 개발된 모델은, 관절의 퇴화를 진단 하는데 이용할 수 있는 가능성이 기대된다

분자생물학적 방법을 통한 출토인골의 개인 동정-사천 늑도 출토 인골과 민통선 민묘 출토 인골을 중심으로 (Personal identification of the excavated ancient human bone through molecular-biological methods)

  • 서민석;이규식;정용재;이명희
    • 보존과학연구
    • /
    • 통권22호
    • /
    • pp.27-40
    • /
    • 2001
  • DNA typing is often used to determine identity from human remains. Recently, the molecular biological analysis of ancient deposits has become possible since methods for the recovery of DNA conserved in bones or teeth from archaeological remains have been developed. In the field of archaeology, one of the most promising approaches is to identify the individuals present in a mass burial site. We performed nuclear DNA typing and mitochondrial DNA sequencing analysis based on PCR from a Korea ancient human remain excavated from Sa-chon Nuk-island and civilian access controlline(CACL). A femur bone were collected and successfully subjected to DNA extraction, quantification, PCR amplification, and subsequently typed for several shot tandem repeat(STR)loci. 4 types of STR systems used in this study were CTT multiplex(CSF1PO, TPOX, TH01), FFv multiplex(F13A01, FESFPS, vWA), Silver STRⅢ multiplex(D16S539, D7S820, D13S317), and amelogenin for sex determination. This studies are primarily concerned with the extraction, amplification, and DNA typing of ancient human bone DNA samples. Also, it is suggestive of importance about closely relationship between both fields of archaeology and molecular biology.

  • PDF

전산화단층영상검사에서 단일에너지와 이중에너지를 이용한 뼈 부피측정의 비교 (Comparison of Bone Volume Measurements Using Conventional Single and Dual Energy Computed Tomography)

  • 김영균;박상훈;김연민
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제40권2호
    • /
    • pp.253-259
    • /
    • 2017
  • 이중에너지 전산화단층촬영으로 뼈를 검사하여 다양한 keV와 조영제 물질 억제(material suppression iodine; MSI), 물질구분(material decomposition; MD)기법을 적용하였을 때, 단일에너지 전산화단층촬영과 비교 평가함으로써 칼슘 부피의 변화를 파악하고자 하였다. 인체유사 팬톰을 이용하여 단일에너지 전산화단층촬영의 영상을 기준으로 이중에너지 전산화단층촬영의 각각 70 keV, 100 keV, 140 keV 및 70 keV-MSI와 MD 칼슘강조-물제거(material calcium weighting; MCW)와 MD 요오드강조-물제거(material iodine weighting; MIW)기법을 적용한 후, 칼슘의 부피를 Agatston score 값으로 비교 평가하였다. 인체유사 팬톰의 칼슘 부피는 keV가 증가할수록 감소하였다(p<0.05). 가장 유사한 이중에너지 전산화단층촬영 집단은 70 keV로 그 차이는 각각 갈비뼈 $35.8{\pm}12.2$, 대퇴골 $16.1{\pm}24.1$, 골반 $13.7{\pm}18.8$, 척추 $179.0{\pm}61.8$이었다. 그러나 MSI의 부피는 부위별로 각각 갈비뼈 5.55%, 대퇴골 76.34%, 골반 55.16%, 척추 87.58%가 감소하였고, MD(MCW)는 각각 갈비뼈 55.96%, 대퇴골 80.78%, 골반 69.64%, 척추 54.23%가 줄었으며, MD(MIW)는 각각 갈비뼈 83.51%, 대퇴골 87.68%, 골반 86.64%, 척추 82.62%의 차이로 감소되었다(p<0.05). 이중에너지 전산화단층촬영으로 검사 시, 뼈의 부피는 keV의 증가에 따라서 감소하게 되고 약 70 keV의 에너지 영역에서 CSCT 집단과 유사한 부피로 측정할 수 있다. 그리고 MSI와 MD의 임상기법을 적용한 부피측정은 상당한 오차가 발생하므로 유의하여 사용하여야 한다.

Collagen으로 유발된 마우스의 관절염에 대한 의이인탕(薏苡仁湯) 추출물의 억제 효과 (Suppress Effects of Euiiin-tang(yìyĭrén-tāng) Aqueous Extracts on Collagen Induced Arthritic(CIA) DBA/1 Mice)

  • 조중현;권오곤;우창훈;안희덕
    • 한방재활의학과학회지
    • /
    • 제20권1호
    • /
    • pp.37-59
    • /
    • 2010
  • Objectives : The object of this study was to observe the favorable anti arthritic effects of Euiiin-tang($y{\grave{i}}y{\breve{i}}r{\acute{e}}n-t{\bar{a}}ng$) aqueous extract(EIITe), has been traditionally used in Korean medicine for treating rheumatoid arthritis on collagen induced arthritic(CIA) DBA/1 mice. Methods : In the present study, effects of EIITe on the releases of human tumor necrosis factor(TNF)-${\alpha}$, interleukin(IL)-$1{\beta}$, matrix metalloproteinase(MMP)-13 and production of Nitric oxide(NO) were observed by in vitro. In addition, to observe the effects on the CIA mice, three different dosages of EIITe, 300, 150 and 150 mg/kg were orally administered once a day for 18 days from 24hrs after antigen challenges(type II collagen) on 21 days after immunization using Type II collagen Freund's complete adjuvant. Six groups, each of 8 DBA/1 mice per group were used in the present study as follows. Changes on the body weights, macroscopic arthritis scores, splenic weights, splenic TNF-${\alpha}$ and IL-6 contents, articular cartilage(femur and tibia) collagen and glycosaminoglycans-chondroitin sulphate, sulphate and hyaluronic acid contents, histopathological observations(microscopic arthritis scores, thicknesses of femur and tibia cartilage thicknesses were monitored, compared to that of dexamethasone, a potent anti inflammatory agents, 1 mg/kg treated mice. Results : As results of collagen challenges, marked decreases of body weights and gains, articular cartilage collagen and glycosaminoglycan - chondroitin sulphate, sulphate and hyaluronic acid contents were observed with increases of macroscopic arthritis scores, splenic weights, splenic TNF-${\alpha}$ and IL-6 contents, articular cartilage(in the both femur and tibia) loss and damages. However, these CIA signs were significantly and dosages dependently inhibited by treatment of EIITe 300 and 150 mg/kg as compared with CIA control, respectively. In addition, the releases of TNF-${\alpha}$, IL-$1{\beta}$, NO and MMP-13 were markedly and dose dependently inhibited by treatment of EIITe, invitro. Although CIA were more favorably inhibited by treatment of dexamethasone 1 mg/kg as compared with EIITe 300 mg/kg, marked decreases of body weights were detected in dexamethasone 1 mg/kg treated mice. Conclusions : The results obtained in this study suggest that over 150 mg/kg of EIITe showed favorable anti arthritic effects on the CIA mediated by immunomodulatory and/or anti oxidative effects. However, detail mechanism studies should be conduced in future with the screening of the biological active compounds in this herb. lthough CIA were more favorably inhibited by treatment of dexamethasone 1 mg/kg as compared with EIITe 300 mg/kg, marked decreases of body weights were detected in dexamethasone 1 mg/kg treated mice, in the present study.

3차원 유한 요소법을 이용한 골절판의 응력 해석 (Numerical Stress Analysis of bone plate System using 3-dimensional finite element method)

  • 김현수;권영수
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1991년도 춘계학술대회
    • /
    • pp.74-78
    • /
    • 1991
  • Conventional compression bone fracture plates sometimes cause osteoporosis under the plate due to their high rigidity which in turn transfer physiological load mostly through the plates and screws. In order to prevent the osteopenia we have designed a system which have a viscoelastic washer between plate and screw head. The washer is made of a biocompatible ploymer (untra high molecular weight polyethylene, UHMWPE). Three-dimensional finite element meshes of the human femur with the conventional and new concept bone plate ere generated and the comparative stress analyses are performed with static half-stance loading condition. The results of analyses showed that could reduce the stress shielding effect compared with the conventional plate.

  • PDF

전십자 인대 재건을 위한 인체 슬관절의 굴신 운동 해석 (An Analysis of Human Knee Joint Motion for Anterior Cruciate Ligament reconstruction)

  • 문병영;손권;박정홍;서정탁
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 춘계학술대회
    • /
    • pp.929-934
    • /
    • 2003
  • Three dimensional joint motion data were obtained using precise magnetic sensors and X-ray. Six metal markers were inserted on the femur and the tibia to set the coordinate system. Two magnetic position sensors were used to record motion data and these positions were transformed into the knee motion. The quadriceps muscle was extended in an automatic manner by an extraction machine. Results of the knee motion were the same as the clinical data. The proposed method is found to be reasonable in describing the knee motion so that these motion data can be used to simulate the normal knee joint.

  • PDF

인체 무릎 관절의 굴신 운동 해석 기법 (A Method to Describe and Analyze Human Knee Joint Motion)

  • 문병영;손권;박정홍;서정탁
    • 한국정밀공학회지
    • /
    • 제20권10호
    • /
    • pp.233-239
    • /
    • 2003
  • Three dimensional joint motion data were obtained using X-ray and precise magnetic sensors. Six metal markers were inserted on the femur and the tibia to set the coordinate system. Two magnetic position sensors were used to record motion data and these positions were transformed into the knee motion. The quadriceps muscle was extended in an automatic manner by an extraction machine. Results of the knee joint motion were the same as the clinical data. The proposed method is found to be reasonable in describing the knee motion so that these motion data can be used to simulate the normal knee joint.

CT 이미지로부터 3차원 모델 생성을 위한 contour 기반 알고리즘 (Contour based Algorithms for Generating 3D Models from CT Images)

  • 류재헌;김현수;이관행
    • 한국정밀공학회지
    • /
    • 제20권4호
    • /
    • pp.174-182
    • /
    • 2003
  • Recently, medical imaging has taken interest on CAD based solution for anatomical part fabrication or finite element analysis of human body. In principle, contours representing object boundary are obtained through image processing techniques. Surface models are then approximated by a skinning method. For this, various methods should be applied to medical images and contours. The major bottleneck of the reconstruction is to remove shape inconsistency between contours and to generate the branching surface. In order to solve these problems, bi-directional smoothing and the composite contour generation method are proposed. Bi-directional smoothing has advantage of removing the shape inconsistency between contours and minimizing shrinkage effect with a large number of iterations. The composite contour by the proposed method ensures smooth transition in branching region.

소의 장골에서 치밀골의 생체역학적인 특성 (Biomechanical Properties of Cortical Bone in Bovine Long Bones)

  • 김남수;황의희;최성진;정인성;최은경;최인혁
    • 한국임상수의학회지
    • /
    • 제20권3호
    • /
    • pp.345-350
    • /
    • 2003
  • We were preferred bovine cortical bone to the others in xenobonegrafts for human and small animals, because those were not limited to supply and have sufficient size for bone transplantation. The strength (ST) and stiffness (SF) of cortical bone in bone grafts were very important. The strength and stiffness of cortical bone were much difference according to position of long bone in bovine limbs because which were biomechanical different to bear body weight. Therefore, we determinated by three bending point test methods the strength and stiffness of cortical bone which were collected in diaphysis of humerus, radius, femur and tibia of bovine. In the results, the strengths and stiffness among these were highest in radius by ST: 253.84$\pm$40.80 MPa, SF: 7.89$\pm$1.91 Gpa and lowest in humerus by ST: 185.69$\pm$28.54 MPa, SF: 6.21$\pm$1.22 Gpa.