• 한국가구학회지
• /
• 제22권4호
• /
• pp.323-329
• /
• 2011

In our country, domestic species can not be used as a structural member because we have not yet grading system. So, to utilize as a basic data of grading system, bending test and numerical modelling on structural member were conducted in this study. 35 of Douglas-fir, 2" ${\times}$ 6", span 2.4 m were tested for the bending properties, and Ansys software was used to analyze the numerical modelling on the structural members. The data of knots were inspected and applied in numerical modelling. To obtain the accuracy of analysis, nonlinear numerical analysis was carried out instead of linear numerical analysis. Ultimate load had a wide range from 4883N to 11,738 N, and maximum deformation also had a range from 26 mm to 68 mm. Average of ultimate load was 8,616 N, and that of maximum deformation was 48 mm. The distinctive features of failure types were simple tension type and cross-grain tension type. Ulitmate load and maximum deformation from numerical modelling were 7,504 N and 37 mm. The numerical modelling drawn by this study is available to all species, and reasonable prediction on the bending performance is possible with only some material properties.

• 한국가구학회지
• /
• 제20권5호
• /
• pp.440-456
• /
• 2009

Because PBD was started as a design tool for steel construction and concrete construction, it was able to applied to the post and beam method of wooden building constructions. But, it may not suitable to light frame wooden construction that is becoming popular in domestic construction market due to the economical efficiency and the constructive simplification. Owing to the share effects between member and sheathing material or among structural members, light frame wooden construction is different from post and beam construction that use a single structural member. Therefore, consideration on the system analysis and system design are urgently needed to use in actual life and inspect the reliability of structures from the system view. With this in mind, code conversion from ASD to PBD that is pressing issue in domestic wooden building construction was studied, also various countries status about PBD were considered and then approaching methods on the system reliability were referred. Finally, several considerations for the development of PBD were explored. PBD should be considered as, not only a new structural design process that select sizes of structural member, but a industrial tool that can lead a development of more reliable wood products. A strongest point of PBD is independent of various construction materials and construction types.

• 한국실내디자인학회논문집
• /
• 제18권6호
• /
• pp.239-248
• /
• 2009

Currently in Korea, Researches on universal design have been actively accomplished in various fields as not only housing and public space, but also product design and education. The purpose of this study is to analyze previous researches on universal design and to identify its research trends which might suggest the future directions of the related studies. In this study, researches on universal design were analyzed to classify the types according to research area, objects and respondents. Two hundreds twenty one papers(journal articles, theses, dissertations, etc.) which were published in Korea from 1997 to 2008 were analyzed. The results were as follows. Researches on universal design have increased quantitatively and research topics have been diverse. In the 1990s, with the introduction of universal design concept, research area focused on space design, but since 2000 researches on universal design have been expanded to apply the fashion, product design and education. In terms of research objects, the studies about evaluation and case analysis have conducted more than those about principles and planning design. With regard to research respondent, the studies for the elderly or people with disabilities and those of all people including a specific target have conducted in a similar ratio. Previous studies were contributed to expand the topics of universal design and it is time to study the applications based on previous research results for utilization and dissemination of universal design. Also it is necessary to conduct interdisciplinary studies in the field of universal design.

• 한국태양에너지학회 논문집
• /
• 제34권3호
• /
• pp.107-114
• /
• 2014

Modular systems are widely used in various building types including housing, dormitory, and barracks. Steel studs have many advantages over other materials as construction components of modular buildings in terms of seismic performance, durability and maintenance. However, steel stud modular systems also have weakness in condensation resistance due to high thermal conductivity of steel. The purpose of this study is to investigate the condensation resistance of steel stud wall corner details in modular buildings by thermal simulation. The condensation resistance was evaluated by temperature difference ratio according to ISO 13788. The result showed that there was little difference between the alternatives of adding cavity and insulation. Separation of interstitial steel studs showed outstanding effect on the improvement of temperature difference ratio.

• 한국압력기기공학회 논문집
• /
• 제15권1호
• /
• pp.53-61
• /
• 2019

The seismic capacity of electric cabinets in Nuclear Power Plants (NPPs) should be qualified before installation and be maintained during operation. However it can happen that identical devices cannnot be produced for replacement of devices mounted in electric cabinets. In case of when no In-Cabinet Response Spectrum (ICRS) is available for new devices, ICRS can be generated by using Finite Element Analysis (FEA). In this study we investigate structural response and ICRSs of battery charger which is supplied to NPPs. Test results on the battery charger are utilized in this study. The response is measured by accelerometers installed on the housing of the battery charger and local panels in the battery charger. Numerical analysis model is established based on resonant frequency search test results and validated by comparison with 2 types of earthquake testing results. ICRSs produced from the numerical model are compared with measured ICRSs in the seismic tests. Developed analysis model is a simple reduced model and anticipates ICRSs quite well as measured response in the tests overall despite of its structural limitation.

• Journal of the Korean Wood Science and Technology
• /
• 제47권5호
• /
• pp.607-616
• /
• 2019

On account of the lack of education of Brazilian worker, this paper analyzed the characteristics of those professionals working in the production sector of timber houses. A sectoral survey was carried out with respective entrepreneurs to investigate the available professionals (career and contract types), evaluate the demands of skilled workers, and indicate solutions to improve the quality of labor qualification. Similarly, over 65% of sampled producers presented both direct-hired and outsourced workforce. For such contract ways, Civil Engineers and Architects were the main careers. Carpenters, Civil Engineers and Architects experienced on timber were the main sectoral demands. Timber Engineers have good potentials of service for this sector. The creation of courses on timber products can emerge as a key alternative to train people.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.462-473
• /
• 2019

The effects of the location and dimension of the gate, location, and volume of the feeder, application of a chill, chill volume, and heating method of the feeder with respect to the effect of the mold-designing technologies on the defect status of the products are described. It is possible to increase the solidification time of the feeder by heating feeder. Furthermore, the pressure generated from the feeder is imposed on a product, and this decreases the generation of shrinkage porosities. In this study, two types of gating and feeding systems had been proposed: the bottom L-type junctions and the top L-type junctions. Additionally, solidification behaviors, such as solidification time, shrinkage porosities, weight percentage of chill system to product, hot spot, and solidification time ratio (=Solidification time of feeder/solidification time of product), are extensively analyzed by using commercial casting simulation software. Based on the solidification behaviors, reasonable mold design, feeding system, critical feeder heating temperature, and solidification time ratios are proposed in the sand casting process for the fabrication of carrier housing in order to reduce the casting defects and to increase the recovery rate.

• 대한건축학회논문집:계획계
• /
• 제34권8호
• /
• pp.3-11
• /
• 2018

This study suggested practical considerations in case of planning Small-Sized Household Units of the Vertical Extension of Aged Apartment along with selecting particular Age-Apartment Complex to plan Small-Sized Household Units. Four parts of consideration; (1) Architectural planning aspects, (2) Resident aspects, (3) Structural aspects, and (4) Facility aspects were thoroughly examined to apply in the remodeling construction period. Proposals for Small-Sized Household Units, in this study, covered two different combinations. One was the combination of six equal units, the other was the combination of eleven different types of household units which reflected resident aspects in plan organizations. Plan organization proposal could be chosen and applied to Vertical Extended units by Local Government, Remodeling Association, or Constructor based on their potential residents' aspect, such as family size, life style, age, amount to income and etc. to fulfill their satisfaction. Furthermore, this study had great significance of the adequately reflecting demand on Small-Sized Household Units in Vertical Extension of Aged Apartment.

• 대한건축학회논문집:계획계
• /
• 제34권11호
• /
• pp.67-74
• /
• 2018

With the rapid increase in the elderly population, numerous problems arise related to the decreased cognitive function such as the declines of reaction time and concentration which are both resulting from ageing. Recently, ICT-based smart home and other residential services are being developed as a means of complementing human cognitive functions, but the elderly, who are in most cases digital-illiterate, find it hard to utilize these tools actively and if so it usually takes longer time and endeavor for the elderly to be familiarized with ICT devices. In this context, this study suggests a configuration of the holographic system in houses that complement the cognitive function of the elderly with the consideration of the interaction with the vision which is a critical function in the cognitive process. The method of this study consists of a literature review on topics including the characteristics of the cognitive function among the elderly, holographic technology and residential services; a configuration of residential services for different space types, depending on the aspects of the cognitive function among the elderly; and finally a suggestion of a holographic system configuration and application depending on various scenarios.

• 한국응급구조학회지
• /
• 제27권1호
• /
• pp.127-137
• /
• 2023

Purpose: This study aimed to analyze the treatment outcomes according to the socioeconomic factor of patients who visited the emergency room. Methods: This study conducted frequency analysis, percentage analysis, and Fisher's exact test analysis method, using the R 4.1.2 program based on the 2019 data from the Korea Health Panel. Results: Among the treatment results of 1,648 patients, 392 patients were hospitalized or transferred to other hospitals, 845 were discharged after treatment, 224 were discharged, and 7 died. The Fisher's exact test of treatment outcomes and socioeconomic factors was not statistically significant for status of the worker and employment relationship, but was significant for the housing, household, economic activity, and insurance types, and marital status and education. Conclusion: The results of this study indicate that it is necessary to conduct follow up studies on socioeconomic factors to provide basic data that can contribute to fairness and equity in the health care field.