• Korean Institute of Interior Design Journal
• /
• v.16 no.3 s.62
• /
• pp.30-37
• /
• 2007

This research is to find out the characteristics and significance of the plastic experiments with colored planes in Theo van Doesburg's works. Based on the analysis, the following results have been obtained. First, Thea van Doesburg's plastic experiments with colored planes started from the paintings in 1916-1918. series and series were made of the ion of still life or human motion. These paintings were intended to make effects of rhythm, acceleration and simultaneity. Second, he colored the outer and inner architectural surface with primary colors. The expression of visual. rhythm on the color design for De Vonk, Districts Housing Projects VIII & IX in Spangen, Multi-Housing in Oosterstraat, Friesian Housing, Landbouw Winter School, and University Hall in Amsterdam embodied the concept of painting-in-architecture. Third, the field of these experiments were extended into the architectural space. As a results, $H\hat{o}tel$ Particulier and Maison d'Artiste was shown on the Architectural Exhibition in Paris in 1923. The colored planes were used as a construction material. They generated the dynamic space in architecture. Fourth, through the pictorial works like Architectural Analysis, Contra-Composition, Simultaneous Composition or Simultaneous Contra-Composition, Tesseract and Aubette Cinema-Dancing Hall, he created the concepts of simultaneous integration including nature and the environments as well as space-time in the architecture.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.23 no.4
• /
• pp.41-45
• /
• 1981

This study is to be surveyed the rural environmental conditions such as housing, water works, sewerage, road and farm road, land utilization, natural conservation and sightseeing, public damage and disaster, and rural water requirement through the 50 villages (10995 home unit) The brief results summarized in this study are as follows. 1.Modernization of rural housing, toilet room and arrangement of dust materials are getting better than before l0yrs. 2.Water works are highly improved but sewerage problem is still in the serious problems. 3.Rood achievement is quite good but farm road is in still insufficiency 4.Utilization of land resources should be maximaized but land conservation is still insufficient condition and farm land is getting polluted. 5.Natural environmental conservation is much more improved but landscape is still insufficient. 6.Public damages such as water pollution, air pollution, and others are getting greater and greater but meteorological damage should be decreased. 7.Watershed condition is getting better and better but because of the large requiriment of the water use for the crops, agricultural water use should be needed much more than before l0yrs.

• Journal of the Korean housing association
• /
• v.12 no.3
• /
• pp.21-28
• /
• 2001

The purpose of this study is to find Korean tradition of residential space which continues since 1960s. Analysis of house works of contemporary architects on the foundation spatial characteristics of Korean. Traditional residence show that the trend and methods of embodiment of tradition in present architecture. The result of analysis could be summarized as follows. First, most of contemporary architects separate a house into two Chae-An Chae and Sa Rang Chae. Second, spatial flows in contemporary house works are very active through transition spaces just as traditional residence. Third, positive An Ma Dang takes on introversion, extroversion and continuity of space and also plays an important role in a house.

• Journal of the Korean housing association
• /
• v.21 no.3
• /
• pp.115-124
• /
• 2010

The environment which has been destroyed for the national growth since 1960's would seem to offer infinite resources to human, but now, the existence of human being is threatened by the development thoughtless for the environment. The World Powers have concentrated on green growth with eco-friendly resource since the end of 20th century. Korea suggested that the vision was the low carbon for green growth in 2008. It is necessary to supply Long-Life Housing in the green technology in terms of the sustainable housing development based on various life style, life cycle of the residences, the restrain remodeling and redevelopment in construction. This study is aim to establish the development of maintenance process to make continuous inhabitation of Long-Life Housing that has the separated SI for maintenance, durability, variability and remodeling. The maintenance for Long-Life Housing is very important to have more than 50~70 years the long term of life cycle in comparison with Housing. Also, the roles of manager and user are important parts in Long-Life Housing. The present maintenance for Housing is shift and repair works by the routine maintenance and demage. However, The maintenance for Long-Life Housing should consider movement and flexibility. In addition, Long-Life Housing requires the proper process of maintenance because it is different from Housing in housing concept, design and constructions stage. Therefore this study shows the efficient maintenance process for Long-Life Housing.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.1
• /
• pp.110-118
• /
• 2015

The standard production unit system is the most basic element in our country construction. However, this standard production unit system shows a large difference in the actual amount of labor input for works at the Apartment housing construction, Therefore, it may be a reasonable alternative to estimate the cost of construction by historical cost data, works will be calculated the cost of labor must determine the exact amount and It is necessary to determine the exact amount of labor input for the construction progress management. This study examines the results of comparing the standard production unit system and the actual amount of labor counting in apartment housing construction was completed in the metropolitan area since 2000, the following results were obtained. the actual amount of labor input are looked for 1.184person/1000 of masonary, $0.084persons/m^2$ of plaster, $0.039persons/m^2$ of Waterproofing, $0.059persons/m^2$ of tile at the Apartment housing construction. in the actual amount of labor counting Compared with standard production unit system, masonry ratio of 59.8%, plaster ratio of 41.3%, waterproofing ratio of 31.5%, tile ratio of 34.3% and The labor rate in the works was the lowest in the plaster. was relatively high in the masonary. Therefore, the amount of labor country apartment housing construction is preferably calculated on historical cost data. But it seems that the amount of labor necessary complement ongoing close enough to the actual standard production unit system a major variable in construction management.

• Proceedings of the KIEE Conference
• /
• 1986.07a
• /
• pp.455-458
• /
• 1986

• Journal of the Korean housing association
• /
• v.22 no.4
• /
• pp.71-81
• /
• 2011

This study aims to make evaluation method as a means to evaluate the crime prevention through environmental design of multi-family housing. According to the analysis of correctness and usefulness of evaluation method in multi-family housing, the preliminary evaluation method is selected. The correctness and usefulness of evaluation method is examined by 2 works. One is analyzing the results of experts' advice about evaluation method. The other is analyzing the results of the case studies of 3 housing sites. Those improve evaluation method to measure the crime prevention through environmental design objectively. As a result, the system of classification is divided into evaluation area and evaluation item. Evaluation area is sorted into four types, i.e. public space, semi-public space, semi-private space, and equipment. Evaluation scores according to evaluation area are different. Evaluation scores of public space are 73. Those of semipublic space are 196. Those of semi-private space are 75, Those of equipment are 28. Evaluation item is divided into 20 items. 20 items are; the entrance of complex, apartment building, recreational space and parking space etc. Checklists according to evaluation items are proposed and detail evaluation criteria according to checklist are proposed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.110-117
• /
• 2017

In the construction of high-rise residential buildings in which the finishing works are done repetitively in each housing unit, the construction period and cost can be reduced, while maintaining the quality, if the work process is properly managed in order for the resources to be input continuously. Time management methods such as the Bar Chart, CPM and LOB are not appropriate, due to the difficulties involved in the diagraming of repetitive works and applying them to the project. The Tact method also has difficulties in maintaining a constant work flow and needs significant effort and cooperation from the subcontractors to allocate the resources consistently. Partitioning, base works for finishing, floor mortar plastering and the final finishing work are done sequentially in residential buildings projects, and there are many repetitive activities which differ in terms of the work method, work area and productivity. If these repetitive activities are synchronized or converged toward the last work area, the goal of process management can be achieved effectively. Therefore, a process planning method for the finishing works of residential building projects is proposed, which takes into consideration elements, such as the sequential relation between the activities in each housing unit and classification of repetitive works in terms of their management method, work area and production rate, for the continuous input of resources into the housing units.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1622-1625
• /
• 2005

In modern Automobile Engineers, Modularize of parts is developing tendency that is more effective manufacture system and maintenance, and it also can be bring down the production cost. In this study will expect faults of mold and find the optimum of Casting Condition from the Simulation software (Z-CAST), tensile specimen is attempted for define the basic properties and process condition. In reasult, Diecasting of Seat Motor Housing is expected to be best fitted in Works.

• Journal of the Korean housing association
• /
• v.7 no.1
• /
• pp.55-62
• /
• 1996

The purpose of this study is to identify the cognitive measurement scale of residential life management of apartment residents. The questionaires were distributed to 550 housewives and 392 questionaires were analyzed in this study. For the construct validity of this residential life management, the methods of factor analysis was used. As the results, 5 factors of residential life management of apartment residents were extracted. They are 1) Residential life covenience service, 2) Residential life support service, 3) Resident's activity support and announcement of managerial works. 4) Safety and order sustaining, 5) Precaution to accident.