• 대한건축학회논문집:구조계
• /
• 제34권2호
• /
• pp.75-82
• /
• 2018

Green roof in Korea has been recognized as part of landscape area and local governments enacted municipal ordinance for supporting green roof thereby assisting part of expenses spent for green roof within a range of budget for buildings which are eligible for the green roof support of existing buildings. However, it is necessary to enforce a regulation of mandatory green roof for new buildings in order to expand green roof application and provide a variety of assistances such as subsidy payment, tax relief, and mitigation of floor area ratio-related regulation as done in other advanced nations. In particular, LEED(Leadership in Environmental and Energy Design) in the USA applies additional point directly for green roof in terms of the reduction in heat island effects. For example, the following items are beneficial to have additional points: habitat preservation or restoration, external space, rainwater management, reduction in outdoor water usage, minimum energy performance, and optimum energy performance. In addition, the BREEAM(Building Research Establishment Environmental Assessment Method) in the UK specifies green roof as one of assessment items to be complied in terms of diversity of species. As such, LEED and BREEAM reflect direct and indirect effects of green roof on assessment criteria, which suggest a direction to green building certification criteria in Korea where only additional points are given for green roof according to soil depth.

• 한국융합학회논문지
• /
• 제12권3호
• /
• pp.205-216
• /
• 2021

지속가능한 도시재생과 주거환경개선을 위한 방안으로 적응적 재사용과 리모델링에 대한 관심과 필요성이 증가하고 있다. 본 연구의 목적은 국내의 적응적 재사용을 위한 단독주택 리모델링 방법론에 있어서의 시사점을 제시하는 것이다. 이를 위하여 최근 단독주택의 리모델링이 활발히 진행되고 있는 부산시의 단독주택지인 '구포새뜰마을'과 '해리단길'을 대상으로 적응적 재사용을 위한 단독주택 리모델링에 대한 이론적 고찰과 사례분석을 진행하였다. 연구를 통하여 도출된 시사점은 다음과 같다. 첫째, 공공에 의해 주민 공간 및 시설로 리모델링된 건축물은 적극적인 주민참여와 지속적인 유지관리 방안이 필요하다. 둘째, 민간에 의해 상업용도로 전용된 단독주택지의 건축물은 주거 및 상업용도의 상생이 필요하다. 셋째, 단독주택지 전체 차원에서 가로 및 건축물 리모델링의 계획 및 설계에 관한 가이드라인이 필요하다.

• 한국안전학회지
• /
• 제37권6호
• /
• pp.136-147
• /
• 2022

The purpose of this study is to analyze four cases of firefighter burns in various fire scenes and to find prevention measures to decrease firefighter injuries. Among the analysis reports prepared by the National Fire Research Institute of Korea from 2016 to 2020, four burn-related accidents are summarized and the main causes are conveyed. The four accidents include second-degree burns from using extinguishers during containment of fires; nine firefighters burned due to re-ignition in the LPG car repair shop; two firefighters injured with third-degree burns from using fire extinguishers during life-saving events in residential housing; and injuries from the radiant heat of the tank BLEVE near the factory fire. These cases are comprehensively investigated in their respective scenes and analyzed based on the fire site investigation reports from the fire department and related theoretical explanations of risk for each accident scene. In the third case study, some experimental research is conducted to evaluate the risk involved with the use of safety gloves. This is evaluated by reviewing Fire Tactics and Standard Operational Procedures (SOP) to determine improvements and recommendations for an efficient firefighting response. Results show that the main causes of burn accidents are the insufficient use of personal protective equipment (PPE), such as safety gloves, and the failure to follow firefighting tactics or SOPs. Through the accident investigation and assessment, it is concluded that to reduce the frequency of burn accidents, the performance of firefighting equipment, SOPs, protection tactics, and safety policy systems require improvement.

• International journal of advanced smart convergence
• /
• 제11권3호
• /
• pp.187-196
• /
• 2022

In this paper, we propose an example of designing and constructing a roof-type solar power plant structure equipped with a Pseudo-BIPV (Building-Integrated Photovoltaic) shape suitable for use as a roof of a small warehouse with a sandwich-type panel structure. As the characteristics of the roof-type solar power generation facility to be installed in the small warehouse proposed in this study, the shape of the roof is not a general A type, but a right-angled triangle shape with the slope is designed to face south. We chose a structure in which an inverter for one power plant and a control facility are linked by grouping several roofs of buildings. In addition, the height of the roof structure is less than 20 cm from the floor, and it has a shape similar to that of the BIPV, so it is building-friendly because it is almost in close contact with the roof. At the same time, the roof creates a reflective light source due to the white color. By linking this roof with a double-sided solar panel, we designed it to obtain both the advantage of the roof-friendliness and the advantage of efficiency improvement for the electric power generation based on the double-sided panel. Compared to the existing solar power generation facilities using A-shaped cross-sectional modules, the power generation efficiency of roofs in this case is increased by more than 11%, which we can confirm, through the comparison analysis of monitoring data between power plants in the same area. Therefore, if the roof-type solar structure suitable for the small warehouse we have presented in this paper is used, the facilities of electric power generation is eco-friendly. Further it is easier to obtain facility certification compared to the BIPV, and improved capacity of the power generation can be secured at low material cost. It is believed that the roof-type solar power generation facility we proposed can be usefully used for warehouse or factory-based smart housing. Sensor devices for monitoring, CCTV monitoring, or safety and environment management, operating in connection with the solar power generation facilities, are linked with the Internet of Things (IoT) solution, so they can be monitored and controlled remotely.

• 한국건설관리학회논문집
• /
• 제23권5호
• /
• pp.23-33
• /
• 2022

공동주택의 하자소송 금액에서 가장 많은 비율을 차지하고 있는 균열하자는 하자판정 기준이 명확하지 않아 판결에 따라 하자에 관한 판단이 엇갈리고 있다. 균열하자 판결금액 대부분을 차지하는 층간균열은 균열의 폭이나 상태와 관계없이 모두 하자로 판정되는 추세이며, 보수공법 또한 대부분 일률적으로 정해지고 있다. 이는 균열하자 판정의 기준이 되는 국토교통부의 하자판정기준과 법원에서 기준을 삼는 건설감정실무의 기준이 일치하는 않는 문제에서 출발한다. 법령의 개정과 법원감정실무지침서의 개정 등을 통해 모든 이해관계자가 적용할 수 있는 하자판정 기준의 수립이 필요하다. 또한, 층간균열 보수공법 기준은 층간균열의 폭과 상태에 따라 공법을 적용할 필요성이 있다. 균열에 대한 하자판정과 보수공법적용을 합리화한다면 소송에만 의존하는 현재의 하자분쟁 추세를 바꿀 수 있는 계기가 될 수 있을 것이다.

• Tribology and Lubricants
• /
• 제38권5호
• /
• pp.205-212
• /
• 2022

This paper presents experimental measurements of the structural characteristics of a two-pad beam-type gas foil journal bearing and its rotordynamic performance for a high-speed motor-driven turbocompressor. The test bearing had two top foils and two beam foils, each with an arc length of ~180°. Each beam foil was etched to obtain 40 beams with six geometries of different lengths and widths. The insertion of beam foils into the bearing housing produces equivalent beam heights. The structural tests of the bearing with a non-rotating journal revealed a smaller bearing clearance and larger structural stiffness for the load-on-pad configuration than for the load-between-pads configuration. Rotordynamic performance measurements during driving tests up to 100 krpm demonstrated synchronous vibrations and subsynchronous vibrations with large amplitudes. The test was repeated after inserting the shim between the top foil and beam foil to reduce the bearing radial clearance. The reduced bearing clearance resulted in a reduction in the peak amplitude of the synchronous vibrations and an increase in the speed at which the peak amplitude occurred. In addition, the onset speed and amplitude of the subsynchronous vibrations were dramatically increased and diminished, respectively. The rotor coast-down tests at 100 krpm show that the reduction in the bearing clearance extends the time to rotor stop, thus implying an improvement in hydrodynamic pressure generation and a reduction in bearing frictional torque.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1388-1395
• /
• 2009

In March 2007, Korea's Ministry of Construction & Transportation (MOCT) established "Guidelines on the Computerization and Use of Geotechnical Investigation Results," which took effect as official instructions. The 2007 Geotechnical Information DB Construction Project is underway as a model project for a stable geotechnical information distribution system based on the MOCT guidelines, accompanied by user education on the geotechnical data distribution system. This study introduces a geotechnical data entry system characterized by the standardization of the geotechnical investigation form, the standardization of metadata for creating the geotechnical data to be distributed, and the creation of borehole space data based on the world geodetic system according to the changes in the national coordinate system, to define a unified DB structure and the items for the geotechnical data entry system and to computerize the field geotechnical investigation results using the MOCT guidelines. In addition, the present operating status of the geotechnical data entry system and entry data processing statistics are introduced through an analysis of the model project, and the problems of the project are analyzed to suggest improvements. Education on, and the implementation of, the model project for the geotechnical data entry system, which was developed via the standardization of the geotechnical investigation results form and the metadata for institutions showed that most users can use the system easily. There were problems, however, including those related to the complexity of metadata creation, partial errors in moving to the borehole data window, partial recognition errors in the installation program for different computer operating systems, etc. Especially, the individual standard form usage and the specificity of the person who enters the geotechnical information for the Korea National Housing Corporation, among the institutions under MOCT, required partial improvement of the geotechnical data entry system. The problems surfaced from this study will be promptly addressed in the operation and management of the geotechnical data DB center in 2008.

• 한국물환경학회지
• /
• 제39권4호
• /
• pp.343-355
• /
• 2023

After the implementation of the total pollution load control system, the effect of improving river water quality by expanding investments in basic environmental facilities, inducing operational efficiency, and reducing the load of various pollutants was clear. However, since the implementation of the system, the management of non-point pollutants has been neglected; management focused on specific substances (biochemical oxygen demand (BOD) and total phosphorus (T-P)) and lacked specific cause analysis and action plans, failed to establish a relationship between water quality and pollution load, failed to reflect stakeholder demands for river water quality management, and failed to apply technical conditions. Therefore, to overcome the limitations raised and achieve a practical and efficient advanced total pollution system, the current system was partially improved and will continue to be improved. This study analyzed the performance and limitations of the total pollution system and introduced recent improvements and the contents that are being improved. The main contents included reducing emissions and reduction monitoring, using water quality tele-monitoring system (TMS) data and self-measurement data, adding population-inducing facilities, and adjusting regional development projects from 20 to 30 multi-family housing units, currentizing each pollutant source according to the roadmap. If the system is improved in a developmental direction and responds to various changes, it will be a more practical and effective policy.

• 한국지반공학회논문집
• /
• 제24권10호
• /
• pp.5-15
• /
• 2008

본 연구의 목적은 연약지반개량을 위한 수평배수층 재료로 순환골재의 적용가능성을 검증함에 있다. 최근 모래의 수급불균형이 초래되고 있으며, 이는 단순히 가격 상승의 문제에서 그치는 것이 아닌 전체 공정의 지연을 초래하게되어 문제의 심각성이 크다. 이러한 상황에서 순환골재는 그 수요를 충족시킬 수 있는 적절한 대체재료로 인식되고 있으며, 이를 검증하기 위해 우선 이미 제정된 각종기준과 규정을 찾아 비교 정리하였고, 다음으로 기존의 수평배수층 재료인 모래와의 공학적 특성에 대한 비교 및 검토를 시행하였다. 결과로써 순환골재는 모래에 비해 큰 투수계수 및 단위중량으로 인해 수평배수층으로써의 대부분 기준을 만족하였으며, 클로깅에 대한 문제는 수평배수층 상부에 필터층을 추가 설치하는 방안으로 해결할 수 있어, 현장적용이 가능한 것으로 판단되었다. 또한 모래에 비해 순환골재의 구입단가가 상대적으로 낮아 공사비 절감이 가능하여, 수평배수층 재료로 순환골재는 매우 경쟁력있는 대체재료라 할 수 있다.

• 지역연구
• /
• 제39권2호
• /
• pp.63-76
• /
• 2023

최근 대도시 상업지역 내 주거복합건축물의 입지로 인해 도시기능이 상업기능에서 주거기능으로 전환되고 있다. 대전광역시 상업지역 내 용도용적제를 개선하기 위해 특·광역시의 제도를 비교분석하고, 사업대상지 8개소를 분석하여 문제점을 도출하였다. 첫째, 주거복합건축물의 용도 분류의 명확화, 둘째, 상업지역의 기능 상실에 대한 도시 계획적 불균형, 셋째, 개발밀도의 차이로 도시환경의 훼손이다. 이에 개선방안으로는 첫째, 주거기능과 용도복합의 비율을 최소 10% 이상 확보하고, 둘째, 다양한 용도와 기능을 융·복합화된 시설을 유도하여 도시경쟁력을 확보하고, 용도용적제 폐지를 통한 공동주택의 일괄적인 용적률을 적용하며, 셋째, 지구단위계획 수립 및 자문을 통한 개발밀도를 제시하였다.