• Journal of the Korean Institute of Navigation
• /
• v.21 no.2
• /
• pp.11-17
• /
• 1997

In this paper, we studied to improve Inoue's[1] and Kijima's[2] model used to predict ship's manoeuvrability in initial design stage. To perform this work, we had PMM(Planar Motion Mechanism) test and rudder open water test for 12 Models of low-speed blunt-ship which have horn type rudder and bulb in afterbody. Using MMG(Mathematical Modelling Group) model, we analyzed hydrodynamic and MMG experimetnal coefficidnts used to search sensitivities and to estimate ship's manoeuvrability, adn the results are performed by the regression analysis of principle parameters. We varified them to analyze ship's manoeubbrability , had simulate manoeubrability to check revised MMG model and compared them wiht Inoue's method. the result of PMM test and sea trial. Then it is found that the revised method can predict the maneuverability more accurately even for an unstable ship.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.57.1-57.1
• /
• 2017

As an upgrade we report the current ASTE ultra-wideband corrugated horn design. The length of the feedhorn gets shortened from 12.5 mm to 11 mm, and it shows better side lobe level at the far-field patterns compared with the previous design. We looked into possible quasi-optical solution to match the feedhorn beam to the optics of the current ASTE telescope, starting from frequency-independent solution using two ellipsoidal mirrors to which wideband performance of the feedhorn naturally fits. We used a commercial physical optics package (GRASP) with an user-defined optimizer to give physical constraints to evaluated optical designs for highest efficiency.

• Journal of Satellite, Information and Communications
• /
• v.1 no.1
• /
• pp.1-4
• /
• 2006

Ku band satellite signal repeating technology just altering a polarization of the repeated signal is applicable for any kind of satellite broadcasting service in geographically shadowed area due to high-rise buildings, trees, and so on. This paper focuses on the design of high polarization discrimination antenna satisfying polarization characteristics with respect to field pattern and frequency band. Designed antenna for the enhancement of axial ratio and polarization discrimination characteristic shows good performance for satellite broadcasting service repeating system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.10
• /
• pp.851-868
• /
• 2015

A radio telescope which has been dominantly used for millimeter and submillimeter wave radio astronomy is a cassegrain antenna. A various receivers with specified observing bandwidths are installed on cassegrain antenna so as to carry out to investigate a diverse radio astronomy. A beam guiding system should be required so that a various receiver can be conducted their own observational frequency bands. The beam guiding system based on Gaussian beam transmission theory consists of quasi-optical circuit used such ellipsoidal mirror, dielectric lens and feed horn. In this paper, not only Gaussian beam transformations based on Gaussian beam theory are presented, but also design techniques for quasi-optical circuit are given. By using proposed design techniques, both Gaussian beam quasi-optical circuits to be used for cassegrain antenna and design results are also described. Properties of key focusing elements such ellipsoidal mirror and dielectric lens and feed horn are also discussed. It is expected that beam guiding system to be applied cassegrain antenna could be easily designed by using proposed design techniques.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.12
• /
• pp.1223-1231
• /
• 2010

The design is presented for a SATCOM antenna capable of simultaneous multi-band (X/Ku/Ka-Band) communications without replacement of feed horns or change of other parts in the application as a ground satellite terminal for large data transfer. The antenna is the offset configuration and consists of a dual-band(X/Ka-band) feed horn, a single-band(Ku-band) feed horn, a frequency selective surface(FSS) sub-reflector and a parabolic main-reflector. The antenna has a main reflector defining a prime focus and a frequency selective surface sub-reflector defining an image focus. A dual-band feed and a single-band feed are provided at each of the prime focus and image focus. The antenna is designed using 3D EM simulator and the gains measured in X/Ku/Ka-band of the complete antenna assembly is more than 31.6dBi, 36.8dBi, 40.8dBi, and the cross polarization is 21.7dB, 26.6dB, 25.2dB, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.7
• /
• pp.1529-1536
• /
• 2010

In this paper, we propose a Axially displaced ellipse gregorian antenna with conical feed horn operating in Ku-band. For fast searching satellite position, it is designed the sub-reflector rotates about $1.5^{\circ}$ tilted by the central axis. the curvature and feed center of the main-reflector and sub-reflector are optimized to achieve maximum antenna efficiency. The designed reflector antenna shows the gain of 33dB and the cross polarization level of less than -21dB and the side-lobe level of less than －14 dB at 12.2 GHz. and C/N ratio of 19dB is proved by reception experiment of Koreasat with fabricated antenna.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.91-96
• /
• 2008

In this paper, a monopulse fled for three mode $2{\times}2$ array feed horn antenna was designed. Gain of single feed was 8.25dB. Increasing property of gain and rectangular waveguide and reflection of free space is decreased because it has structure extending to electric plane at connected part from transformation to free space. When fled port1 and port2 is placed vertically and thickness of aperture hem is reduced, isolation is satisfied with property of lower -25dB. Also, at higher frequency, it is confirmed that isolation is improved. Combination of electric field occurs less influence because port1 and port3 is placed horizontally and distribution of electric field is connected to parallel. However, because of combination of electric field, it is more improved from 2dB to 6dB than isolation of port1 and port2. Direct combination occult less effect at port1 and port4 than effect of port2 and port3, it is lower -35dB.

• Journal of Fashion Business
• /
• v.19 no.2
• /
• pp.149-170
• /
• 2015

The purpose of this study is to link the Yi tribe's traditional patterns to bag design. Yi tribe is a minor ethic group in China, whose traditional pattern has a high artistic value in that its shapes are diverse and each one has peculiar elegance. Traditional patterns are also indicative of spiritual dept or symbolic stories, rather than being indicative of simple formative beauty. Thus, reorganizing these patterns and applying them artistically to design- in terms of resource utilization- would be significant. Out of all of the Yi tribe's traditional patterns, the cherry blossom_(马樱花), water wave_(水波), sky father and earth mother_(天父地母), pomegranate blossom, triangle, sheep' horn, wisteria vine_(藤条), square and diaper_(四角菱形) and the zigzag_(曲折) patterns were chosen for use during the development of a bag design. This study is based upon document study, including research papers and internet web sites, the point of which was to investigate the form of the traditional patterns, and the creative design process. The design procedure includes these sub-processes: selection, arrangement and color-scheme. In the selection process, the form of the pattern was edited using Adobe Photoshop. The pattern was freely arranged to reflect various emotions. In terms of the color-scheme of the patterns, the colors used by Henri Matisse(1869-1954) in his work were selected and adapted when dyeing the patterns. Subsequently, the final design resulting from these design development processes was applied to the actual production of the bag by using canvas fabric and leather, after which the bag image was proposed using computer simulation. In conclusion, six bag designs were created using traditional patterns from the Yi tribe. Through the processes explained above, this study confirmed that traditional patterns could be widely applied as design motifs and that more sophisticated, modern, and creative designs could be developed based on traditional patterns.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.7
• /
• pp.1263-1269
• /
• 2016

Hearing impaired persons are exposed to the danger since they can't be aware of many dangerous situations like fire alarms, car hones and so on. Therefore they need haptic or visual informations when they meet dangerous situations. In this paper, we design a dangerous sound detection engine for hearing impaired. We consider four dangerous indoor situations such as a boiled sound of kettle, a fire alarm, a door bell and a phone ringing. For outdoor, two dangerous situations such as a car horn and a siren of emergency vehicle are considered. For a test, 6 data sets are collected from those six situations. we extract LPC, LPCC and MFCC as feature vectors from the collected data and compare the vectors for feasibility. Finally we design a matching engine using an artificial neural network and perform classification tests. We perform classification tests for 3 times considering the use outdoors and indoors. The test result shows the feasibility for the dangerous sound detection.

• Annual Conference of KIPS
• /
• 2015.10a
• /
• pp.1341-1344
• /
• 2015

In this paper, the designed fish robot is researched and developed for aquarium underwater robot. This paper is a study on how the outside technology merely to find the location of fish robots without specific sensor or internal devices. This model is designed to detect the position of the Robotic Fish in the Mat lab and Simulink. This intends to recognize the shape of the tank via a video device such as a camera or camcorder using an image processing technique to identify the location of the robotic fishes. Here, we are applied the two methods, one is Hom - Schunk Method and second one is newly proposed method that is the comparing image data algorithm. The Horn - Schunck Method is used to obtain the velocity for each pixel in the image and the comparing image data algorithm is proposed to obtain the position with comparing two video frames and assumes a constant velocity in each video frame.