• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.5
• /
• pp.293-302
• /
• 2008

The limiting factors to determine available soil depth were studied with 390 soil series in soil profile description and physicochemical data in Korean soils. The limiting factors were coarse sandy layer, gravel and skeletal layer, hardpan layer, cat clay layer, poorly drained layer, salt accumulated layer and bed rock layer so on. The soils of having limiting factors were 332 soil series, but soils without limiting factors were 58 soil series. Soils with limiting factors were, hardpan 5, slopeness 93, immature soil 29, cinder 5, sandy 42, gravel or skeletal 47, bedrock 19, high salt content 8, poorly drained soil 22, heavy clay 32, sulfate soil 3 and ash soil 27 etc. And the orders of available soil depth were immature > slopeness > ash > heavy clay > sandy > gravel or skeletal > hardpan > cindery > poorly drained > bedrock > acid sulfate soil > salt accumulated soil etc.

• Management & Information Systems Review
• /
• v.35 no.1
• /
• pp.69-84
• /
• 2016

This study set the research model to examine the correlation between Word-of-Mouth constraint factors, efforts to negotiate pertaining to these, Flow and Word-of-Mouth intent based on the theory of leisure constrain when it comes to the correlation between consumers' Word-of-Mouth constraint factors and Word-of-Mouth. Correlation among the variables were verified in an empirical manner. Results of this study are summarized as follows. After verifying the hypotheses, all the hypotheses were adopted excluding the hypotheses of two results (Hypothesis 1, hypotheses 5). Detailed results regarding this are as follows. First, the following is the effect of the Intrapersonal Constraint and Word-of-Mouth constraint factors on the Word-of-Mouth constraint negotiation effort. Interpersonal Constraint and Structural Constraint exert positive (-) effect on the Word-of-Mouth constraint negotiation effort. In case of Intrapersonal Constraint, negative (-) effect was demonstrated. Thus, this was statistically significant although dismissed from hypothesis verification. Second, the following is the result of examining the structural correlation between Word-of-Mouth constraint negotiation effort, Flow and Word-of-Mouth. Word-of-Mouth constraint negotiation effort exerts positive (-) effect on the Flow, but it was not statistically effective in case of the Word-of-Mouth. Lastly, it is possible to see that the Flow plays the role of a medium since it exerted positive (-) effect on the Word-of-Mouth. Results of this study are expected to provide key theoretical and working level implications as well as general understanding of the Word-of-Mouth constraint factors, consumers' Flow and Word-of-Mouth.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.5
• /
• pp.1073-1081
• /
• 1998

Primary pulmonary lymphoma (PPL) is an uncommon tumor, which constitutes 3-4% of all extranodal lymphomas and 0.3-0.5 % of all primary pulmonary malignant tumors. Low-grade B-cell lymphomas of bronchus-associated lymphoid tissue (BALT) accounted for the majority of PPL. This BALT lymphomas are frequently asymptomatic and have an excellent prognosis and an indolent clinical course by contrast with T-cell type. Therefore, determination of the B- or T-immunophenotype of the tumor cells is known to be very important from a clinical aspect. Recent advances in immunohistochemical techniques, cytogenetics, and molecular biology have allowed better definition of type, maturation, and clonality of lymphoma cells and have made it possible to better understand the PPL. We experienced an asymptomatic 43-year-old man who was evaluated for infiltrates on both sides discovered incidentallly after a routine chest roentgenogram. He was eventually diagnosed as low-grade B-cell lymphoma of BALT by immunohistochemical staining from specimens obtained by open lung biopsy. He was treated with combination chemotherapy. At follow up 12 mons following initial diagnosis, he remains in stable. We report this case, who showed a relatively favorable prognosis and indolent clinical course compatible with low-grade B-cell lymphoma.

• Journal of Life Science
• /
• v.13 no.3
• /
• pp.359-364
• /
• 2003

The seaweed Porphyra pseudolinearis as a dominant species grows at upper of the intertidal zone of the East Sea from October to March. Vegetative cells have not matured during October when observed with naked eye and microscope. In the middle of November, although it didn't distingush between female and male gametophytes by eye, it showed antheridium and carpogonium when observed vertical section under microscope. From early December, It could be distinguished female and male gametophytes clearly. From Feburary it showed shorted length of thalli by release of spermatangia and carposporangia as maturation. At early March, the colar has been decaeded and side of thalli has been melted, completed of release of spermatia. At the end of December, the average length and width of female thalli were 149.9$\pm$5.6mm and 22.2$\pm$2.3mm, respectively. The length and width of male thalli were 149.9$\pm$9.4mm and 20.7$\pm$1.8mm. At the end of January, the average length and width of female thalli were 94.6$\pm$6.4mm and 29.1mm$\pm$5.1, respcetively. The length and width of male thalli were 107.8$\pm$7.3mm and 25.9$\pm$0.9mm. From this period lengths of female and male thalli have already been shortned by the release of spermatia and carpogonia.

• Korean Journal of Materials Research
• /
• v.13 no.8
• /
• pp.497-502
• /
• 2003

Crystallographic characteristics and interfacial structures of $Al_2$$O_3$and $ZrO_2$dielectric films prepared by atomic layer chemical vapor deposition (ALCVD) were investigated at atomic scale by high-resolution transmission electron microscopy (HRTEM) and energy dispersive X-ray spectroscopy (EDS)/electron energy-loss spectroscopy (EELS) coupled with a field-emission transmission electron microscope. The results obtained from cross-sectional and plan-view specimens showed that the $Al_2$$O_3$film was crystallized by annealing at a high temperature and its crystal system might be evaluated as either cubic or tetragonal phase. Whereas the $ZrO_2$film crystallized during deposition at a low temperature of ∼$300^{\circ}C$ was composed of both tetragonal and monoclinic phase. The interfacial thickness in both films was increased with the increased annealing temperature. Further, the interfacial structures of X$ZrO_2$$O_3$and $ZrO_2$films were discussed through analyses of EDS elemental maps and EELS spectra obtained from the annealed films, respectively.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.42.1-42.1
• /
• 2011

The main payload of the Science and Technology Satellite 3 (STSAT-3), Multipurpose Infrared Imaging System (MIRIS), will be equipped with the wide-field near-infrared camera. Its wide field-of-view ($3.67^{\circ}{\times}3.67^{\circ}$) is optimal for the observation of the zodiacal light (ZL), the sunlight scattered by the interplanetary dust (IPD). The MIRIS will continuously monitor the seasonal variation of the ZL towards both north and south ecliptic poles, which is caused by the asymmetries of the IPD distribution with respect to the Sun and the ecliptic plane. In addition to the monitoring observations, we are planning pointed observations for compelling structures in the ZL, the asteroidal dust bands and the gegenschein. This presentation proposes the zodiacal light observations with the MIRIS and discusses the expected results.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.313-318
• /
• 2016

Purpose: This study measured and analyzed the PTO (power take off) torque of a transplanter according to the planting conditions during field operation. Methods: A torque measurement system was constructed with torque sensors to measure the torque of a PTO shaft, a measurement device to acquire sensor signals, and a power controller to provide power for a laptop computer. The field operation was conducted at four planting distances (26, 35, 43, and 80 cm) and two planting depths using the transplanter on a field with similar soil conditions. One-way ANOVA with planting distance and Duncan's multiple range test at a significance level of 0.05 were used to analyze the PTO torque. The torque ratio was calculated based on the minimum torque using the average PTO torque measured under each planting condition. Results: The average torques on the PTO shaft for planting distances of 26, 35, 43, and 80 cm at a low planting depth were 11.05, 9.07, 7.04, and 3.75 Nm, respectively; the same for planting distances of 26, 35, 43, and 80 cm at a middle planting depth were 12.20, 9.86, 7.94, and 4.32 Nm, respectively. When the planting distance decreased by 43, 35, and 26 cm, the torque ratio at a low planting depth increased by 88, 142, and 195%, respectively. When the planting distance decreased by 43, 35, and 26 cm, the torque ratio at the middle planting depth increased by 84, 128, and 182%, respectively. Conclusions: PTO torque fluctuated by planting distance and depth. Moreover, the PTO torque increased for short planting distances. Therefore, farmers should determine the planting conditions of the transplanter by considering the load and durability of the machine. The results of this study provide useful information pertaining to the optimum PTO design of the transplanter considering the field load.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.2
• /
• pp.81-86
• /
• 2011

Polymer-modified cement is the composite material made by partially replacing and strengthening the cement hydrate binders of conventional mortar with polymeric modifiers such as polymer latexes and redispersible polymeric modifiers. It is known that the addition of polymer to cement mortar leads to improved quality, which would be expected to have a high chemical resistance. Therefore, the purpose of this study is to identify the improved chemical resistance, such as low permeability and low ion diffusivity, of the polymer-modified cement as a solidification agent for the radwaste. First, polymer-modified cement specimens by latex modification were prepared according to the polymer content from 0% to 30% to select the optimized polymer content. At those specimens, the water-to-cement (W/C) ratio was maintained to 33% and 50% respectively. After the much curing time, the structural integrity of specimens was evaluated through the compressive strength test and the porosity evaluation by the water immersion method. From the results, 10% of the polymer content at 33% of the W/C ratio was shown to have the most improved quality. Finally, the leaching test referredfrom ANS 16.1 for the specimens having the most improved quality was conducted. Dedicated specimens for the leaching test were then mixed with radioisotopes of $^{60}Co$ and $^{137}Cs$ at the specimen preparation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.430-430
• /
• 2007

In general, polyimides (PIs) are used in liquid crystal displays (LCDs) as alignment layer of liquid crystals (LCs). Up to date, the rubbing alignment technique has been widely used to align liquid crystals on the PI surface, which is suitable for mass-production of LCDs because of its simple process and high productivity. However, this method has some disadvantages. Rubbed PI surfaces include the debris left by the cloth and the generation of electrostatic charges during rubbing process. Therefore, rubbing-free techniques for LC alignment are strongly required in LCD technology. In this experiment, PI was uniformly coated on indium-tin-oxide electrode substrates to form LC alignment layers using a spin-coating method and the PI layers were subsequently imidized at 433 K for 1 h. The thickness of the PI layer was set at 50 nm. The LC alignment layer surfaces were exposed to an $Ar^+$ ion-beam under various ion-beam energies. The antiparallel cells and twisted-nematic (TN) cells for the measurement of pretile angle and electro-optical characteristics were fabricated with the cell gap of 60 and $5\;{\mu}m$, respectively. The LC cells were filled with nematic LC (NLC, MJ001929, Merck) and were assembled. The NLC alignment capability on ion-beam-treated PI was observed using photomicroscope and the pretilt angle of the NLC was measured by the crystal-rotation method at room temperature. Voltage-transmittance (V-T) and response time characteristics of the ion-beam irradiated TN cell were measured by a LCD evaluation system.

• Archives of Plastic Surgery
• /
• v.36 no.5
• /
• pp.611-616
• /
• 2009

Purpose: The rate of fistulas occuring followed by resection of oral cavity, oropharyngeal, hypopharyngeal, and laryngeal cancer are reported to be 9 ~ 23% according to various documents. Neglected treatment of the fistula can result in a setback in proper treatment with restrictions in oral intake leading to delayed return to daily life. Furthurmore, in severe cases, it may injure important vessels and adjacent structures of the neck area. The author reviewed previously reported cases of treatment methods for fistulas recurring after diverse head and neck operations and with sharing the treatment experiments of our patients, we tried to present a treatment algorism for different fistula types. Methods: Our study was based on retrograde analysis of 64 patients who were clinically diagnosed with fistula after operation for cancer of the head and neck from 1997 to 2008 at Severance Hospital. Their primary sites of cancer were 8 oral cavity, 22 oropharynx, 25 hypopharynx, and 9 larynx. The patients were aged 45 to 75 years and the male to female ratio was 11 to 1. The patient's operation records and progress notes were evaluated for determination of degree of fistula and treatment methods. Results: Most fistulas were clinically suspected after postoperative 5 days and symptoms noted for detection of the fistula were erythema, purulent discharge, edema, tenderness, and fluctuation. The fistula was definitely diagnosed at postoperative 2 weeks with barium test and treatment method ranging from conservative management to operative procedure were applied to each patients. Total 21 patients were managed with conservative protocol. In 15 cases, direct repair of the fistula was done and more stable repair of the fistula was possible with using of TachoComb$^{(R)}$. Pharyngostoma was performed in 14 patients. Among them, 4 patients healed spontaneously, 5 patients were taken direct closure, 4 patients were taken pectoralis major musculocutaneous flap, and one patient was taken esophageal transfer. The other 14 patients were taken 11 pectoralis major musculocutaneous flaps and 3 free flaps without pharyngostoma formation. Conclusion: Fistula is a troublesome complication resulting after resection of head and neck cancer. Early detection and adequate treatment according to the period and condition of the fistula may prevent further complications and reduce the pain of the patient.