• 한국환경과학회지
• /
• 제25권3호
• /
• pp.395-403
• /
• 2016

This study examined the adsorption effect of aromatic pesticides by hollow fiber NF membrane on rejection and removal properties. Batch type adsorption test and hollow fiber NF membrane filtration were conducted with 5 different kinds of aromatic pesticides. 3 to 15 days were required to reach the equilibrium concentration and $0.3181{\sim}0.8094{\mu}g/cm^2$ were adsorbed to hollow fiber NF membrane. Since 5 hours of separation test were too short to keep steady state for permeate due to the repetition of sorption and desorption, longer times were required to evaluate the rejection performance of NF membrane. Sorption and desorption were confirmed by the separation test equipped with membrane and without membrane. Adsorption contribution of aromatic pesticides to hollow fiber membranes were shown to be ranged from 16.1% to 36.3% and indicated the difference considering sorption effect.

• 멤브레인
• /
• 제26권1호
• /
• pp.76-85
• /
• 2016

반도체 및 디스플레이 공정에서 배출되는 $N_2/NF_3$ 혼합 가스 분리를 위한 폴리썰폰 중공사막 제조 연구를 수행하였다. 먼저 non-solvent induced phase separation (NIPS)와 vapor induced phase separation (VIPS) 혼합 공정을 이용하여 기체투과성이 높은 고분자 중공사막을 제조하였다. 제조된 중공사막 표면에 PDMS(polydimethylsiloxiane)와 Teflon AF1600(R) 고분자 소재를 이용하여 얇은 박막을 추가적으로 코팅하는 방법으로 기체 분리막을 완성하였다. 제조된 분리막은 코팅된 고분자 소재의 기체 분리 특성에 따라 상이한 $N_2/NF_3$ 분리 성능을 보여주었다. 특히 Teflon AF1600(R) 이 코팅된 중공사막의 경우 $N_2/NF_3$ 분리 성능(> 14)을 보여주었고, $N_2$ 투과도는 4.5 GPU를 나타내었다. 상용 폴리썰폰 막과 비교해 볼 때, 투과도는 약간 감소하였지만 기체 선택도는 크게 증가하였다. 이런 특징은 $N_2/NF_3$를 분리하는 분리막 구조로써 큰 가능성을 지니는 것으로 판단된다.

• 한국물환경학회지
• /
• 제21권2호
• /
• pp.205-210
• /
• 2005

There has been a growing interest in NF membrane for drinking water treatment, because it can remove simultaneously both hardness and hazardous micro pollutants such as pesticides and THM precursors. In this work, a hollow fiber NF membrane known as a composite membrane was employed for the rejection properties of both hydrophilic solutes and micro organic pollutants, where the former was used to evaluate the molecular sieving effect of this membrane and the latter was employed for the investigation of solute-membrane interaction as hydrophobic materials. This membrane effectively rejected the hydrophilic solutes and the permeation of them was mainly controlled by the molecular sieving effects such as molecular weight and molecular width. In the case of all micro organic pollutants, the rejections were varied from 42.2% for Simazine to 91.6% for Malathion, and the parameters related to the steric hindrance could significantly play an important role in the rejection. In the batch type adsorption experiments, all micro organic pollutants were entrapped mildly on the membrane in spite of lower degree compared with that of aromatic compounds, and they were correlated with log K.

• 공업화학
• /
• 제24권5호
• /
• pp.456-470
• /
• 2013

중공사형 막은 지난 수십 년간 빠르게 성장하고 있는 새로운 기술의 하나이다. 또한, 고분자 소재를 이용한 분리막은 기체분리, 연료전지, 수처리, 폐수처리, 유기물 분리 등 여러 분야에서 주목 받고 있다. 그중에서도 액체분리용 역삼투(RO)와 한외여과(Ultrafiltration)막의 중간 특성을 갖는 나노여과(Nanofiltration)막은 상대적으로 역삼투 막에 비하여 낮은 투자비와 낮은 운전압력, 높은 투과 성능을 가지며 다가 음이온 염과 $200{\sim}1000gmol^{-1}$사이의 유기물에 대한 높은 제거율을 갖는 막이다. 본 논문에서는 NF 중공사 분리막의 소재, 제조 방법(상전이법과 계면중합법)에 따른 멤브레인의 구조 제어 및 다양한 특성 평가에 관한 연구동향을 살펴보고자 한다. 현재 대부분의 NF용 분리막은 평막형(plate and frame type)이나 나권형(spiral wound type)으로 제품화 되고 있는데, 중공사형(hollow-fiber type)의 제품화가 지연되고 있는 것은 기존 소재를 바탕으로 제조할 경우 강도면에서 안정적이지 못한 면이 있으므로 새로운 소재를 개발하거나 기존 소재의 개선이 필요할 것으로 보인다. 이러한 부분을 보완할 수 있을 만한 제조 기술이 확보된다면 중공사 형태의 나노여과막이 점차 나권형막을 대체하여 시장에서 높은 점유율을 나타낼 수 있을 것이다.

• 한국물환경학회지
• /
• 제20권3호
• /
• pp.296-300
• /
• 2004

The rejection properties of 6 aromatic pesticides were evaluated by a continuous flow system equipped with a hollow fiber NF membrane. Different from the separation experiment of batch cell, the rejection and the removal could be calculated exactly because the concentration of feed, permeate and retentate was separately obtained. The lowest and the highest rejection were found in carbaryl(54.8%) and methoxychlor(99.2%), respectively, and the removals were always shown higher than rejections. This may be caused by some reasons such as the solute adsorption on the membrane, the variation of feed concentration. Although molecular weight, molecular width regarded as solute characteristics and log P(n-octanol/water partition coefficient) as hydrophobicity could be applied to explain the rejection property, these factors should be considered together for better analysis. According to the higher relationship between log B(solute permeability) and molecular weight, it was revealed that the solute separation with this membrane was influenced more by molecular weight.

• 멤브레인
• /
• 제28권5호
• /
• pp.361-367
• /
• 2018

본 연구에서는 polyvinylidene fluoride (PVDF) 중공사막을 지지체로 한 저압용 나노복합막을 제조하였다. Poly styrene sulfonic acid (PSSA)와 polyethyleneimine (PEI)을 layer-by-layer 및 염석 효과 방식으로 지지체막에 코팅하였다. 막의 투과도와 염 배제율 성능을 알아보고자 NaCl, $MgCl_2$, $CaSO_4$ 100 mg/L수용액을 1 L/min의 유량으로, 2 bar의 압력을 상온에서 가해주었다. 20,000 ppm의 PSSA (이온세기 1.0)용액에 3분, 30,000 ppm (이온세기 0.1)용액에 1분 코팅한 막이 가장 우수하였다. 투과도와 염 배제율은 NaCl 공급액에서는 38.5 LMH, 57.1%, $MgCl_2$는 37.9 LMH, 90.2%, $CaSO_4$는 32.4 LMH, 54.6%로 각각 측정되었다.

• Membrane and Water Treatment
• /
• 제15권2호
• /
• pp.79-88
• /
• 2024

Modification of Polyvinylidene fluoride (PVDF) hollow fiber membranes (HFMs) characteristics and performance were investigated via post treatment using different oxidants. sodium hypochlorite (NaOCl), hydrogen peroxide (H₂O₂) and potassium persulfate (KPS). Fourier transform infrared (FTIR) and Proton nuclear magnetic resonance (¹H-NMR) results revealed no structural differences after post treatment. Cross-sectional micrographs show finger-like structures at the outer and inner walls of the HFMs and sponge-like structures in middle, where NaOCl and KPS post treated fibers exhibited a decrease in finger-like structures in addition to aggregates appearing on the surface, consequently leading to an increase in the surface roughness (Ra) from 48 nm to 52.8nm and 56 nm, respectively. Hydrogen peroxide post treatment only was observed to decrease the water contact angle from 98° to 81.4°. It was also observed that the elongation at break and the modulus deceased after NaOCl post treatment from 34.5 to 28.5% and from 19.3 Mpa to 16.6 Mpa, respectively. Moreover, pure water flux after H₂O₂ post treatment increased from 87.8 LMH/bar to 113 LMH/bar at 0.45 bar, while no changes were detected for the methylene blue dye rejection (74%) between raw and hydrogen peroxide post treated fibers at the same pressure. According to the findings hydrogen peroxide post treated PVDF HFMs have the most uniform surfaces, with almost no alterations in structural and mechanical properties or porosities with enhanced hydrophilicity and pure water flux maintaining appropriate rejection. Therefore, it is considered an efficient surface modifying agent for UF/NF membranes or low-pressure separators.