• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.1
• /
• pp.45-51
• /
• 2012

Sea ice properties have been considered a key indicator in the structural design criteria of icebreaking vessels and arctic offshore platforms to estimate design ice load and resistance for their safety management in Arctic Ocean. A measurement study of sea ice properties was conducted during July to August of 2011 with the Korean icebreaking research vessel "Araon" around Chukchi Borderland. The sea ice concentration appears to be rapidly decreasing during this cruise. Ice condition seems to be thick second-year ice and multi-year ice and then, a lot of melt ponds were observed in the surface of ice floe. Calculated flexural strength of sea ice was about 250~550kPa, ice thickness was roughly 1.3~3.0m. In this research we performed field experiment to measure ice temperature along the depth, thickness, density, salinity, brine volume ratio and crystal structure. Apparent conductivities derived with the electromagnetic induction instrument were compared to drill hole measurement results and accuracy of sea ice thickness estimation formula was discussed.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.spc8
• /
• pp.3031-3038
• /
• 2011

Ion-coordinating ruthenium complexes [cis-Ru(dcbpy)(L)(NCS)$_2$, where dcbpy is 4,4'-dicarboxylic acid-2,2'-bipyridine and L is 1,4,7,10-tetraoxa-13-azacyclopentadecane, JK-121, or bis(2-(2-methoxy-ethoxy)ethyl) amine, JK-122] have been synthesized and characterized using $^1H$ NMR, Fourier transform IR, UV/vis spectroscopy, and cyclic voltammetry. The effect of $Li^+$ in the electrolyte on the photovoltaic performance was investigated. With the stepwise addition of $Li^+$ to a liquid electrolyte, the device shows significant increase in the photo-current density, but a small decrease in the open circuit voltage. The solar cell with a hole conductor, the addition of $Li^+$ resulted in a 30% improvement in efficiency. The JK-121 sensitized cells in the liquid and solid-state electrolyte give power conversion efficiencies of 6.95% and 2.59%, respectively, under the simulated sunlight.

• Journal of Korean Society of Forest Science
• /
• v.96 no.5
• /
• pp.567-571
• /
• 2007

This study was conducted to clarify the differences in breeding bird communities between deciduous forests of Gwangneung and Mt. Namsan areas from April to August 2006. Two 10ha area were selected for territory mapping of breeding bird community in both study area. The DBH distribution of trees and average foliage profiles were significantly different between study areas. Also, breeding bird communities were different. Number of breeding species and pairs, breeding density, and bird species diversity were higher in Gwangneung area than in Mt. Namsan area. When examining relationship between forest habitat structure and bird community, Number of bird species and breeding pairs belonged to hole and canopy guild were increase as the increase of coverstory coverage and number of large trees. Therefore, it is necessary to make vertical structure more various to plant bushes, and to make DBH distribution more diverse for enhancing bird species diversity in the degraded ecosystem.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.215.2-215.2
• /
• 2015

We fabricated dual active layer (DAL) thin film transistors (TFTs) with indium tin zinc oxide (ITZO) and indium gallium zinc oxide (IGZO) thin film layers using solution process. The ITZO and IGZO layer were used as the front and back channel, respectively. In order to investigate the bias stress stability of ITZO SAL (single active layer) and ITZO/IGZO DAL TFT, a gate bias stress of 10 V was applied for 1500 s under the dark condition. The SAL TFT composed of ITZO layer shows a poor positive bias stability of ${\delta}VTH$ of 13.7 V, whereas ${\delta}VTH$ of ITZO/IGZO DAL TFT was very small as 2.6 V. In order to find out the evidence of improved bias stress stability, we calculated the total trap density NT near the channel/gate insulator interface. The calculated NT of DAL and SAL TFT were $4.59{\times}10^{11}$ and $2.03{\times}10^{11}cm^{-2}$, respectively. The reason for improved bias stress stability is due to the reduction of defect sites such as pin-hole and pores in the active layer.

• Journal of the Korea Computer Graphics Society
• /
• v.4 no.1
• /
• pp.55-66
• /
• 1998

This paper presents a simple method for relieving the ambiguity problems within the sub-voxel based surface-fitting approach for the surface construction. ECB algorithm is proposed to avoid the ambiguity problem which is the root of the holes within the resulting polygon based approximation. The basic idea of our disambiguation strategy is the use of a set of predefined modeling primitives (we call SMP) which guarantees the topological consistency of resulted surface polygons. 20 SMPs are derived from the extension of the concept of the elementary modeling primitives in the CB algorithm [3], and fit one to five faces of them to the iso-surface crossing a cell with no further processing. A look-up table which has a surface triangle list is pre-calculated using these 20 SMPs. All of surface triangles in the table are from the faces of SMPs and are stored in the form of edge list on which vertices of each surface triangle are located. The resulted polygon based approximation is unique at every threshold value and its validity is guaranteed without considering the complicated problems such as average of density and postprocessing. ECB algorithm could be free from the need for the time consuming post-processing, which eliminates holes by revisiting every boundary cell. Through three experiments of surface construction from volume data, its capability of hole avoidance is showed.

• Journal of Korean Neurosurgical Society
• /
• v.58 no.3
• /
• pp.301-303
• /
• 2015

We report on a case of an 87-year-old woman who showed spontaneous resolution of a large chronic subdural hematoma which required surgical decompression. She had suffered from confused mentality and right side weakness of motor grade II for 10 days. The initial brain CT scan showed a 22 mm thick low density lesion located in the left fronto-temporo-parietal region with midline shift (12 mm) which required emergency decompression. However, because she and her family did not want surgery, she was followed up in the outpatient clinic. Five months later, follow up brain CT showed that the CSDH had disappeared and the patient became neurologically normal. The reasons for spontaneous resolution of CSDH remain unclear. We discuss the possible relation between mechanisms of physio-pathogenesis and spontaneous resolution of a large chronic subdural hematoma (CSH) in an elderly patient.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.3
• /
• pp.298-307
• /
• 2006

TEE Forming process for HDPE(High Density PolyEthylen) pipe has been analyzed by using rigid plastic finite element code, DEFORM-3D. TEE of HDPE pipes is necessary to connect main pipe with branch pipe and change the flow direction of hot water. A HDPE pipe is used as a insulator to maintain the temperature of hot water A butt welding process through TEE forming for a HDPE pipe is a updated process improving the strength of welding part compared to conventional extrusion welding process. The Experiment of Hot and Cold Forming have been performed. The design parameters such as a initial hole shape have been obtained through rigid-plastic finite element analysis, which is applied to the actual manufacturing process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.280-280
• /
• 2013

Using both experimentaland theoretical methods, we have investigated the structural and electronic properties of self-assembled two-dimensional organic molecule (hexaaza-triphenylene-hexacarbonitrile, HATCN), which is used as an efficient OLED hole injection material, on Au(111) surfaces. Low-temperature scanning tunneling microscope (STM) measurements revealed that self-assembled linear and hexagonal porous structures are formed at atomic steps and terraces of Au(111), respectively. We also found that the hexagonal porous structure have chirality and forms only small (＜1,000 nm2) phase-separated chiral domains that can easily change their chiral phase in subsequence STM images at 80 K. To explain these observations, we calculated the molecular-molecular and molecule-surface interaction energies by using first-principles density functional theory method. We found that the change of their chiral phase resulted from the competition between the two energies. These results have not only verified our experimental observations, but also revealed the delicate balance between different interactions that caused the self-assembed structures at the surface.

• Current Photovoltaic Research
• /
• v.4 no.2
• /
• pp.64-67
• /
• 2016

We investigated the influences of Ag nanoparticle (NP) arrays and surface nanohole (NH) patterns on the optical characteristics of 10-${\mu}m$-thick c-Si wafers using finite-difference time-domain (FDTD) simulations. In particular, we comparatively studied the plasmonic effects of both monomer arrays (MA) and heptamer arrays (HA) consisting of identical Ag NPs. HA improved the optical absorption of the c-Si wafers in much wider wavelength range than MA, with the help of hybridized plasmon modes. The light trapping capability of the NH array pattern is superior to that of the Ag plasmonic NPs. We also found that the addition of the Ag HA on the wafers with surface NH patterns further enhanced optical absorption: the expected short-circuit current density was as high as $34.96mA/cm^2$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.53-56
• /
• 1998

Electroluminescent(EL) devices based on organic materials have been of great interest due to their possible applications for large-area flat-panel displays, where they are attractive because of their capability of multicolor emission, and low operation voltage. In this study, glass substrate/ITO/Eu(TTA)$_3$(Phen)/Al(A), glass substrate/ITO/TPD/Eu(TTA)$_3$(p-hen)/Al(B) and glass substrate/ITO/TPD/Eu(TTA)$_3$(phen)/AlQ$_3$/Al(C) structures were fabricated by vacuum evaporation method. where aromatic diamine(TPD) was used as a hole transporting material, Eu(TTA)$_3$(phen) as an emitting material. and tris(8-hydroxyquinoline)Aluminum(AlQ$_3$) as an electron transporting layer. Electroluminescent(EL) and I-V characteristics of Eu(TTA)$_3$(Phen) with a various thickness were investigated. This structure shows the red EL spectrum, which is almost the same as the PL spectrum of Eu(TTA)$_3$(phen). I-V characteristics of this structure show that turn-on voltage was 9V and current density was 0.01A/$\textrm{cm}^2$ at a dc operation voltage of 9V. Electrical transporting phenomena of these structures was explained using the trapped- charge-limited current model with I-V characteristics.