• Food Science of Animal Resources
• /
• v.34 no.3
• /
• pp.395-402
• /
• 2014

The current study was conducted to identify technology for the production of high quality pork, based on the meat consumption habits of consumers. Macsumsuk, a type of kaolinite (a clay mineral), and/or a mixture of herbs (Mori Folium, Sophorae Radix, Glycyrrhizae Radix, Citri Leiocarpae Exocarpium, and Pogostemi Herba) were added to the diets of fattening pigs. Sixty barrow pigs (4 kinds of treatment ${\times}5$ pigs/treatment ${\times}3$ replicates) were randomly assigned to either the Control (no additives), T1 (3% Macsumsuk), T2 (3% Herb mixtures), or T3 (3% Macsumsuk + 3% Herb mixtures) groups, and were fed the diets for 60 d. Dressed weights were in the order of T1 ($93.40{\pm}4.68kg$) > T2 ($91.40{\pm}6.52kg$) > Control ($88.80{\pm}1.57kg$) > T3 ($86.80{\pm}2.01kg$). Back-fat thickness of the Control animals ($23.2{\pm}1.03mm$) was significantly greater than that of the various treatment groups (p<0.01). Numeric values representing the carcass yield and quality grade were higher for all the treated groups than the Control group, thought the difference was not statistically significant. Crude fat content was significantly higher in the Control group ($2.23{\pm}0.34%$) than in the treated groups (p<0.05). The addition of both Macsumsuk and herb mixtures into the diets of the pigs significantly reduced cooking loss of the pork compared to the Control (p<0.05). No statistically significant changes were observed in the shear force (average $5.87{\pm}0.54kg/cm^2$), water holding capacity (average $54.59{\pm}3.16%$), or CIE values of the pork, whereas cholesterol levels significantly decreased (p<0.01) in those fed Macsumsuk and/or the herb mixtures. No significant changes in fatty acid composition, total saturated fatty acid (SFA), total unsaturated fatty acid (UFA), or UFA/SFA ratios were observed by any of the treatments. In conclusion, the results obtained from this study suggest that the addition of Macsumsuk and/or herb mixtures into the diets of growing and fattening pigs improves the pork quality by reducing cooking loss, decreasing cholesterol content, and enhancing sensory characteristics.

• Korean Journal of Food Science and Technology
• /
• v.37 no.1
• /
• pp.38-43
• /
• 2005

Effects of fermented food waste feeds on meat quality and physico-chemical characteristics of fully grown pigs were investigated. Two treatments were tried in this study; commercial feed (control) and fermented food waste feed(FFWF). Except for much thicker backfat of control, carcass traits, carcass weight, dressing percentage, carcass grade, cooking loss, shear force, water-holding capacity, drip loss, NPPC meat color, and marbling score of commercial feed(control)- and fermented food waste feed (FFWF)-fed pigs were not significantly different. Primal cut weights and meat percentages were significantly different (p<0.05) between control and FFWF. pH of FFWF loin was significantly lower (p<0.05) than that of control. FFWF loin showed higher L*-value and lower a*-value compared to control.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.2
• /
• pp.228-232
• /
• 2007

The purpose of the study was to investigate the quality characteristics of Jeju island's indigenous pork fed with citrus byproducts. Samples were the Jeju island's indigenous pork loin without citrus byproduct (JNP-0) and the Jeju island's indigenous pork loin fed with 8% and 15% citrus byproducts during growing and fattening periods (JNP-1). The pH, VBN content, bacterial counts, L* value, frozen loss, thawing loss, water boiling loss, hardness, springiness, cohesiveness, chewiness, and shear force value were not significantly different between JNP-0 and JNP-1 (p<0.05). The TBARS, a* value, b* value, water holding capacity, and pan boiling loss of JNP-0 were significantly higher than those of JNP-1 (p<0.05), but the gumminess of JNP-1 was significantly higher than that of JNP-0 (p<0.05). For sensory characteristics, taste, flavor, juiciness, and palatability were not significantly different between JNP-0 and JNP-1, but tenderness of JNP-1 was sig-nificantly higher than that of JNP-0 (p<0.05).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.5
• /
• pp.731-737
• /
• 2011

TMR (total mixed ration) feed was developed by adding mugwort (Artemisia capillaris Thunb.) and was fed to Hanwoo cattle. We investigated the effects of feeding mugwort on the physicochemical properties and sensory scores of the Hanwoo beef, as well as the feasibility of producing beef with high quality and function. Samples included Hanwoo loin fed with fattening cattle TMR feed with (treatment) or without mugwort (control). The content of total catechin in Hanwoo loin fed with the treatment and control was 0.516 and 0.307 mg/kg, respectively, while the content of epicatechin was 0.116 and 0.087 mg/kg, respectively, both of which were significant increase from feeding TMR with mugwort (p<0.05). There was no significant difference between the control and treatment in terms of $b^*$ value, VBN content, EDA, total bacterial numbers, freezing loss, thawing loss, cooking loss, hardness, cohesiveness, gumminess, chewiness, shear force, or sensory score of boiled meat. $L^*$, $a^*$ and pH value for the treatment were significantly higher than the control (p<0.05). TBARS and springiness for the control were significantly higher than the treatment (p<0.05). The aroma of the raw meat and the taste, tenderness, juiciness, and palatability of the roasted meat for the treatment were significantly superior to the control (p<0.05). These results suggest that giving feed containing mugwort inhibits lipid oxidation, increases water holding capacity, and improve sensory scores.

• Food Science of Animal Resources
• /
• v.24 no.2
• /
• pp.115-120
• /
• 2004

This study was carried out to investigate the effect of the scalding temperature at slaughtering process on meat quality and storage properties of chicken. The yellowness (b$\^$*/ value) of skin decreased at high scalding temperature (65-67$^{\circ}C$) and WHC (water holding capacity) increased from 67.04％ at low temperature (53-55$^{\circ}C$) to 69.26％ at high temperature. WBS (Warner-Bratzler Shear force) significantly increased from 1.70kg/0.5inch$^2$ to 2.54kg/0.5inch$^2$ as the scalding temperature increased (p＜0.05). TBARS (Thiobarbituric Acid-Reactive Substance) values were 0.25mgMA/kg at low temperature, 0.24mgMA/kg at middle temperature (59-61$^{\circ}C$) and 0.27mgMA/kg on 3 days of storage. Total aerobic counts (TPC) were 4.99 logCFU/mL at low temperature, 4.88 10gCFU/mL at middle temperature and 4.05 logCFU/mL. Although TPC was decreased as the scalding temperature increased. The detection rate of feather at carcass inspection was low as the scalding temperature increased and the detection rate of large feather (＞lcm) was not significantly different between middle temperature and high temperature. Exposed flesh was severe as the scalding temperature increased. In conclusion, meat color and physical properties of chicken were acceptable when the carcasses were scalded at low temperature, but they were microbiologically susceptible and uneasy to remove the feather. The yellowness (b$\^$*/ value) of skin decreased at high scalding temperature, and total aerobic counts (TPC) were decreased as the scalding temperature increased, and easy to remove the feather.

• Journal of the Korean Institute of Gas
• /
• v.20 no.4
• /
• pp.78-84
• /
• 2016

In this work, finite element investigations were carried out to optimize reverse drawing process design for manufacture of high-capacity aluminum liner used in fuel cell vehicle. The tensile tests with aluminum alloy Al6061 annealed at $350^{\circ}C$ were carried out to obtain the flow stresses. In order to estimate more accurate flow stresses after necking, the flow stresses were estimated from the comparison of load vs. displacement curves which were obtained from experimental and simulation results of tensile tests. In case of finite element analyses of reverse drawing processes, it was focused on the effects of process designs such as punch and die designs, blank holding force, drawing ratio and the clearance between the punch and blank holder on the generation of wrinkle and fracture of the blank and partially heated punch. However, it was revealed that experimental results still show the fracture at the end of 2nd drawn cup, although partially heated punch is used. Nevertheless, the drawn cup can be used because the sufficient length of the drawn cup for the next flow forming process and spinning process was obtained.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.6
• /
• pp.766-772
• /
• 2009

In this study, the effects of feeding citrus byproduct on physicochemical and sensory characteristics of chicken meats were investigated. The samples consisted of chicken meats provided with only feed for laying hen without citrus byproduct (T-0), and the chicken meats fed with 1.0%, 1.5% and 2.0% citrus byproduct during the starter (initial period feed; $1{\sim}9th$ day), the grower (middle period feed; $10{\sim}24th$ day), and the finisher (latter period feed; $25{\sim}36th$ day), respectively. The $L^*$ value of thigh was significantly lower in the T-1 than in the T-0, the $a^*$ value was significantly higher in the T-1 than in the T-0 (p<0.05). The water holding capacity of thigh was significantly higher in the T-1 than in the T-0 and the cooking loss was significantly higher in the T-0 than in the T-1 (p<0.05). The acid value was significantly higher in the T-0 than in the T-1 (p<0.05). Antioxidant activity was higher in the T1 than in the T-0 (p<0.05). There was no significance between T-0 and T-1 regardless of feeding citrus byproduct, in terms of chicken's $b^*$ value, frozen loss, thawing loss, hardness, springiness, cohesiveness, gumminess, chewiness, shear force, free amino acid content of hot water extracts, taste, flavor, tenderness, juiciness and palatability.

• Journal of Animal Science and Technology
• /
• v.49 no.4
• /
• pp.509-514
• /
• 2007

This study was conducted to investigate the optimal energy level at growing Korean black goat from April 20 to November 6, 2006. Forty male Korean black goat were divided into four treatments and were fed with concentrate feed containing ME 2.4, 2.6, 2.8 and 3.0 Mcal/kg with CP 15% and rice straw. Average daily gains of were 59.8, 65.4, 73.2 and 77.2 g/day in groups fed with ME 2.4, 2.6, 2.8 and 3.0 Mcal/kg diet, respectively. There was a tendency to increase ADG as the ME level of concentrate feed grew. Dressing percentage were 49.73, 48.64, 50.19 and 51.36% in each group, and were increased as the ME level grew. Meat percentage ranged between 53.1 and 55.3%, and were almost constant. Ranges of crude fat contents and water holding capacity were and 57.9~59.0%, which were increased as the ME level grew. On the other hand, shear force were between 2.8 and 3.1 kg/cm2, which were decreased as the ME level grew. These results suggest that the optimal energy level at growing goat's concentrate is ME 3.0 Mcal/kg.

• Journal of Animal Science and Technology
• /
• v.49 no.4
• /
• pp.523-530
• /
• 2007

A total of 127 Korean native black pigs(gilt 30, boar 97) were used to investigate the carcass properties, yields of retail cut and meat quality. The average live weight, chilled carcass percentage and retail cut percentage used in this study were 74.69kg, 71.14% and 61.09% for boar, and 75.5kg, 73.88% and 56.25% for gilt, respectively. Although gilts were higher in live weight and chilled carcass percentage whereas lower in retail cut percentage when compared to boars, there was no significantly difference between gender(p<0.05). Gilts had higher fat contents than boars regardless of weight range groups. Protein contents increased as slaughter weight increased for gilt and boar groups. Gilts contained high intramuscular fat contents had significantly lower Warner-Bratzler shear force(WBS) and water holding capacity(WHC) when compared to boar in the same weight range group(p<0.05). There was no significantly different in meat color(p>0.05) although gilts had higher L(lightness), a(redness) and b(yellowness) values when compared to the same group of boar. From the result of this study can be used for the grading guideline and quality evaluation standard of Korean native black pigs by gender and live weight.

• Journal of Animal Science and Technology
• /
• v.49 no.4
• /
• pp.531-538
• /
• 2007

A total of 127 Korean native black pigs(gilt 30, boar 97) were used to investigate the carcass properties, yields of retail cut and meat quality. The average live weight, chilled carcass percentage and retail cut percentage used in this study were 74.69kg, 71.14% and 61.09% for boar, and 75.5kg, 73.88% and 56.25% for gilt, respectively. Although gilts were higher in live weight and chilled carcass percentage whereas lower in retail cut percentage when compared to boars, there was no significantly difference between gender(p<0.05). Gilts had higher fat contents than boars regardless of weight range groups. Protein contents increased as slaughter weight increased for gilt and boar groups. Gilts contained high intramuscular fat contents had significantly lower Warner-Bratzler shear force(WBS) and water holding capacity(WHC) when compared to boar in the same weight range group(p<0.05). There was no significantly different in meat color(p>0.05) although gilts had higher L(lightness), a(redness) and b(yellowness) values when compared to the same group of boar. From the result of this study can be used for the grading guideline and quality evaluation standard of Korean native black pigs by gender and live weight.