• 반도체디스플레이기술학회지
• /
• 제7권2호
• /
• pp.29-33
• /
• 2008

LCD panels are increasingly used to show moving image material, for example in LCD television sets. However, moving images become blurred on LCD panels. One of the causes of motion blur is the slow reaction of LC(liquid crystal) cell to change in the pixel value. Another cause of motion blur is the hold-type characteristic of the LCD panel, during the frame time the image is shown continuously. This type of motion blur can be reduced with a scanning backlight. We have designed and fabricated a scanning backlight system that solves the hold-type characteristic problem in a way that Flat fluorescent lamp divided 6 blocks was scanned 60Hz.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.277-280
• /
• 2008

Recently, a demand of nano/micro patterned polymer for display or biochip has been rising. Then many studies have been carried out. Nano/micro-embossing is a deformation process where the workpiece materials is heated to permit easier material flow and then forced over a planar patterned tool. In this work, the hot-emboss process is performed with different forming conditions; forming temperature, load, press hold time, to get the proper condition for linear pattern fabrication on plated-type polymers (PC). Replicated pattern depth increases in proportion to the forming temperature, load and time. Reduction of the workpiece thickness increases according to press hold time. In process of time, reduction ratio of workpiece thickness decreases because of surface area increment of the workpiece and pressure decline on it.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1164-1167
• /
• 2009

Motion-image-quality of LCD-TVs is discussed by dynamic spatial frequency response. Smaller temporal aperture or higher frame rate can improve dynamic response, but an increase of motion velocity easily cancels the improvement. A guideline for deciding the desirable temporal aperture and frame rate of LCD-TVs is described, under the condition that camera and display have the same parameters. Two candidates of the desirable parameter sets will be (240 or 300 Hz, 50 to 100% aperture) and (120Hz, 25 to 50% aperture), from the viewpoint of "limit of acceptance" on motion-imagequality-deterioration for critical picture materials.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1322-1325
• /
• 2009

Adaptive black band insertion improve blur phenomenon that caused by hold type issue of LCD, the approach regulate charge time by OE signal to control black inserted ratio, and the charge time be modified according the motion quantity of displaying content.

• 반도체디스플레이기술학회지
• /
• 제1권1호
• /
• pp.9-13
• /
• 2002

A polyimide-type electrostatic chuck (ESC) was fabricated for the application of holding 8-inch silicon wafers in the oxide etching equipment. For the fabrication of the unipolar ESC, core technologies such as coating of polyimide films and anodizing treatment of aluminum surface were developed. The polyimide films were prepared on top of thin coated copper substrates for the good electrical contacts, and the helium gas cooling technique was used for the temperature uniformity of the silicon wafers. The ESC was essentially working with an unipolar operation, which was easier to fabricate and operate compared to a bipolar operation. The chucking force of the ESC has been measured to be about 580 gf when the applied voltage was 1.5 kV, which was considered to be enough force to hold wafers during the dry etching processing. The employment of the ESC in etcher system could make 8% enhancement of the wafer processing yield.

• 대한전자공학회논문지SP
• /
• 제46권6호
• /
• pp.123-131
• /
• 2009

LCD(Liquid Crystal Display)의 발전은 이전에 사용하던 CRT를 대체하고 있다. 하지만 LCD와 같은 홀드 타입(Hold type)형 디스플레이의 구조적 특성으로 인해 동영상 재생 시 움직임 블러나 움직임 저더 등의 많은 문제점이 발생했다. 이를 해결하기 위해 화면 사이사이에 새로운 화면을 생성하여 화질을 개선하기 위한 화면 보간 기법을 사용하고 있다. 본 논문에서는 우세 움직임 벡터와 블럭간 분산값의 차이를 이용한 화면 보간 기법을 제안한다. 제안하는 알고리즘은 먼저 생성되는 프레임 전후의 프레임에 대하여 블록매칭을 이용한 단방향 움직임 추정을 통한 블록 움직임 예측을 하게 된다. 그리고 블록 움직임 예측에서 찾지 못한 부분을 비교 블록간 분산값을 통해 픽셀 평균값과 영향이 큰 모션 벡터를 선택하여 적용시키는 픽셀 움직임 예측으로 새로운 프레임을 생성한다. 제안하는 알고리즘을 이용하여 여러 실험영상의 프레임 보간 결과를 비교하였으며, 기존 알고리즘인 양방향 화면 보간 방법에 비하여 약 3dB 정도의 PSNR 증가를 얻을 수 있었고 단방향 화면 보간 방법에 비해 계산량을 줄일 수 있었다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제10권1호
• /
• pp.65-71
• /
• 2010

NAND-type SONOS with a separated double-gate FinFET structure (SDF-Fin SONOS) flash memory devices are proposed to reduce the unit cell size of the memory device and increase the memory density in comparison with conventional non volatile memory devices. The proposed memory device consists of a pair of control gates separated along the direction of the Fin width. There are two unique alternative technologies in this study. One is a channel doping method and the other is an oxide thickness variation method, which are used to operate the SDF-Fin SONOS memory device as two-bit. The fabrication processes and the device characteristics are simulated by using technology comuter-adided(TCAD). The simulation results indicate that the charge trap probability depends on the different channel doping concentration and the tunneling oxide thickness. The proposed SDG-Fin SONOS memory devices hold promise for potential application.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.694-697
• /
• 2003

In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. LCD is different from CRT in the sense that it's continuous passive device, which holds images in entire frame period, while impulse type device generate image in very short time. To reduce image sticking problem related to hold type display mode, we made an experiment to drive LCD like CRT. We made articulate images by turn on-off backlight, and we realized the ratio of Back Light on-off time by adjusting between on time and off time for video signal input during 1 frame (16.7ms). Conventional CCFL (cold cathode fluorescent lamp) cannot follow fast on-off speed, so we evaluated new fluorescent substances of light source to improve residual light characteristic of CCFL. We realized articulate image generation similar to CRT by blinking drive. As a result, reduced image sticking phenomenon was validated by naked eye and response time measurement.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.419-422
• /
• 2004

In this paper, we propose a new metric called "dynamic gamma" to quantitatively evaluate the dynamic temporal response of an LC display device. The widely-used response time and corresponding 3-D bar graphs cannot fully describe the dynamic characteristics of an LC panel [1], and using response time to compare different LC panels and assessing the dynamic features of LC panels is difficult. On the other hand, the new metric MPRT mixes an LC panel's slow temporal response with its hold-type display effect. The proposed new metric, dynamic gamma, and corresponding 2-D plots, are arguably more suitable for quantitatively characterizing the dynamic characteristics of an LC panel, so comparing two LC panels becomes easy. Furthermore, dynamic gamma has the unique property that it can be used to quantify the limitations/capabilities and to assess the effectiveness of an overdrive mechanism for a particular LCD. In the paper, two LC panels using different technology are analyzed and compared using this new metric.

• Journal of Information Display
• /
• 제9권1호
• /
• pp.6-13
• /
• 2008

Mobile phones use the embedded memory in LDI (LCD Driver IC). In memory accessing mode, data overlapping phenomenon can occur. These days, various contents such as DMB, Camera, Game are merged to phone. Accordingly, with more data transmission, there would be more data overlapping phenomenon in memory accessing mode. Human eyes perceive this data overlapping phenomenon as simply horizontal line noise. The cause of the data overlapping phenomenon was analysed in this paper. The data overlapping phenomenon can be changed by the speed of data transmission between the host and LDI. The optimum memory accessing position can be defined. This paper proposes a new algorithm for avoiding data overlapping.