• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.930-937
• /
• 2004

In tunnel blasting, rock damage and overbreak at excavation limits are strongly related to stability of the tunnel and cost for rock support, and also affect to maintenance after tunnel construction. In this study, many field tests and measurements have been carried out in highway tunnels so that discordance between blast design and practical production blasting could be settled and actual methods of over break control could be proposed through the understanding of the problems in existing blasting patterns. Test blasting in tunnel was carried out many times in two tunnel sites. Also, long hole blasting longer than existing blasting pattern was executed for good grade of rock mass whose RMR value is more than 60. Using the results of test blasting, new standard blasting patterns for two lane tunnel were proposed. As a result of profile measurement after blasting, drilling is a major factor of overbreak. And then the methods for minimizing overbreak were adapted in new blasting patterns.

• 대한교통학회지
• /
• 제23권6호
• /
• pp.7-18
• /
• 2005

현재 우리나라의 설계속도는 도로의 기능, 지역특성, 지형에 의해 결정하도록 규정하고 있다. 그러나 도로의 기능을 구분하는 뚜렷한 기준이 없어 적정 설계속도 결정에 설계자의 주관이 개입될 여지가 많으며, 기능분류가 단순하여 설계에 반영되지 못하는 도로기능이 존재하고, 지역분류기준 또한 모호하여 주변지역의 토지이용 특성을 제대로 반영하지 못하였다. 한편 도로가 통과하는 지역의 지형적 특성을 충분히 고려치 않고 단순히 교통소통 만을 강조하여 지나치게 높은 설계속도로 설계하여 도로의 건설비가 증가하고 있다. 따라서 본 연구에서는 지방부 도로 기능분류 및 설계속도 결정에 계획교통량 규모를 반영토록 하여 설계자의 주관적 판단소지를 줄이고 경제적 효율성을 기하였으며, 도시부 기능을 세분화하여 기능분류의 단순함과 설계에 반영되지 못하는 도로의 기능이 존재하는 문제를 해결하였다. 또한 GIS의 지형고도 데이터를 이용하여 지형을 구분하는 구체적 기준을 제시하였다. 즉 기능, 지역, 지형요소를 보다 세분하여 고려하고, 보완기준으로 계획교통량을 추가한 새로운 기능분류와 설계속도 결정기준을 제시하였다.

• 자원환경지질
• /
• 제46권5호
• /
• pp.411-424
• /
• 2013

${\bigcirc}{\bigcirc}$고속도로 건설현장 ${\bigcirc}$공구에 분포하는 암석에 대하여 산성배수 발생개연성을 평가하고 피해 저감대책을 검토하였다. 고속도로건설구간의 지반은 이천리층에 해당하는 사암과 중성내지 산성 화산암으로 구성되어 있으며 이들은 주변의 화강암관입에 수반된 열수 용액에 의해 황화광물을 산점상으로 함유하고 있다. 황화광물의 함량이 높은 화산암과 사암은 산성배수 발생개연성이 높고 중금속(Zn, Pb, As)을 많이 함유한 산성배수가 주변지역으로 유출되어 환경오염을 유발할 개연성이 높은 것으로 나타났다. 건설공사과정중 산성배수가 발생될 개연성이 높은 구역에서 배출되는 배수는 중화 및 중금속 제거처리 후 배수가 이루어져야 하며, 절취면의 안정성 확보를 위하여 산성배수의 발생을 근원적으로 억제할 수 있는 코팅처리기술을 적용한 후 숏크리트, 앵커 등 사면보강공법이 적용되어야 할 것으로 판단된다. 화산암과 사암은 골재로서 활용이 어려우며 지반성토재로 사용할 경우 지하수와 우수의 접촉을 최소화할 수 있는 성토층의 구조를 갖춘 후 활용하여야 한다.

• 화약ㆍ발파
• /
• 제32권2호
• /
• pp.16-24
• /
• 2014

본 시공사례는 "중앙선 원주~제천 복선 전철 제 ${\bigcirc}$공구 노반 건설공사" 중 고속도로 하부통과 구간으로서 터널 노선 상부 13m에 운행 중인 고속도로가 있다. 고속도로에 영향을 최소화하기 위하여 무진동 암파쇄 굴착공법이 적용되었으나, 기계식 굴착작업 특성상 굴착 자체에 많은 시간이 소요되어 신속한 터널 폐합이 이루어지지 못해 굴착 중 주변 암반의 변위 증가에 따른 상부 침하가 우려되어 대안공법의 필요성이 요구되었다. 따라서 고속도로의 진동허용기준인 1.0cm/sec 이하로 제어하면서, 터널의 신속한 굴착과 폐합을 통해 지반의 변위를 최소화하여 상부 고속도로의 침하 현상을 방지할 수 있는 전자발파공법(eDevII)이 검토되었다. 사전 굴착영향검토를 시행한 결과, 전자발파를 통해 상부 고속도로의 안정적인 관리가 가능한 것으로 검토되었으며, 이를 기초로한 시공 결과 안전하고, 신속하게 굴착을 완료하였다.

• Earthquakes and Structures
• /
• 제18권1호
• /
• pp.1-14
• /
• 2020

The vehicle-bridge interaction (VBI) analysis might be cumbersome and computationally expensive in bridge engineering due to the necessity of solving large number of coupled system of equations. However, VBI analysis can provide valuable insights into the dynamic behavior of highway bridges under specific loading conditions. Hence, this paper presents a numerical study on the dynamic behavior of a conventional highway bridge under strong near-field and far-field earthquake motions considering the VBI effects. A recursive substructuring method, which enables solving bridge and vehicle equations of motion separately and suitable to be adapted to general purpose finite element softwares, was used. A thorough analysis that provides valuable information about the effect of various traffic conditions, vehicle velocity, road roughness and effect of soil conditions under far-field and near-field strong earthquake motions has been presented. A real-life concrete highway bridge was chosen for numerical demonstrations. In addition, sprung mass models of vehicles consist of conventional truck and car models were created using physical and dynamic properties adopted from literature. Various scenarios, of which the results may help to highlight the different aspects of the dynamic response of concrete highway bridges under strong earthquakes, have been considered.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.367-372
• /
• 2004

Highway have to be constructed under thorough investigation about function, economy, safety of the traffic and environment, because they are needing huge budget for construction and management as important facilities of the social overhead capital in the national economics. Initially the construction of roads becomes effective the plan, the design, construction phase. The design is foundation of accomplishment of the roads operation, the results of the design operation come to much effect a nation when using roads. Especially ancient design methods were not expected for visual effects as attaching weight to 2-dimensional drawing from flat. Therefore, it is difficult to recognize troubles happened during the work operation besides, many troubles are solved by modification of drawings as situations. For solving of those of the problems, it is emphasize on visual effect through introduction of 3-dimensional design from the initial phase. In case of national conditions, limited national land has caused increasing weight for construction of the roads through cities as the urban centered development. thereupon, citizens are increasing concern about the right of the light and the environmental effect, road designs and construction of the structures under agreement with local residents cause to make troubles. The analysis of 3-dimensional design is necessary as intermediation for decision making. In this study, Virtual reality techniques in 3-dimensional roads design are expected to visual effect on the publishing Internet Web, find problems in first phase and make decision between users and people having civil appeal.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.381-388
• /
• 2002

A series of centrifuge model tests were performed to investigate the behavior of piled bridge abutment subjected to lateral soil movements induced by the construction of approach embankment. In these tests, both the depth of soft clay and the rate of embankment construction are chosen as key parameters to examine the effects on lateral soil movements. The depth of soft clay layer varies from 5.2 m to 11.6 m, and the rate of embankment construction has two types of staged construction(1m/30days, 1m/15days) and instant construction. It is shown that, the distribution of lateral flow induced by stage embankment construction has a trapezoidal distribution. And practical guidelines to check the possibility of some lateral movement of piled abutment were investigated. The validity of the proposed guidelines by centrifuge test was compared with the observed performance by lateral movement index, F(Japan Highway Public Corporation) and modified I index(Korea Highway Corporation). Based on the results obtained, the critical values of F and modified I, as a practical guidelines, are proposed to 0.03 and 2.0, respectively.

• Journal of Construction Engineering and Project Management
• /
• 제7권4호
• /
• pp.1-12
• /
• 2017

India has accorded a high priority to road infrastructure development through Public-Private Partnership (PPP) and it has set a high target for investment inflows. Yet, it is widely held that road/highway infrastructure has not been developing at required pace and that the road infrastructure projects under PPP have been suffering from several hurdles and delays, thereby affecting project success/failure. This paper is an attempt to analyze the critical success/failure factors of road infrastructure projects under PPP in India. A questionnaire survey was conducted among a sample of the stakeholders of road infrastructure projects to identify the critical success/failure factors during all four major project stages using different approaches. Initially, the critical factors were identified through ranking based on the average/mean score. Later, the conventional RII score was used to identify the critical success/failure factors. Finally, the critical success/failure factors were also identified based on the stakeholder-wise ranking of the factors and their convergence. The assessment revealed that there was a greater convergence across the different methods and also that there was greater consensus among project stakeholder on the critical success/failure factors of road PPP projects.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.120-125
• /
• 2008

The purpose of this case study is to find out current issue and improvement directions of the application of 3D and 4D to the construction project including building, highway and railway projects. For the study, the main functions of the 3D and 4D simulation of current system are analyzed and proposed improvement directions for 3D CAD utilization in 4D environment. Case studies of CAD application include land development for housing complex, highway project and express railway project.

• 한국강구조학회 논문집
• /
• 제14권3호
• /
• pp.443-452
• /
• 2002

고속도로 건설은 여러 국가에서 거의 완료되었으며, 정부나 고속도로 관계기관은 유지관리쪽에 초점을 맞추고 있다. 교량을 효과적으로 유지관리하기 위해, 시스템 신뢰성을 이용한 교량의 잔존수명을 예측하는 것은 매우 시급하다. 그리고 시스템 신뢰성을 이용한 교량의 유지관리 모델을 개발하는 것은 필수적이다. 이 논문에서는 시스템 신뢰성과 라이프 타임 분포를 이용하여 예방 유지관리(Preventive Maintenance)와 사후 유지관리(Essential Maintenance) 모델을 개발하였다.