• Journal of the Semiconductor & Display Technology
• /
• v.18 no.1
• /
• pp.15-20
• /
• 2019

Inspection and measurement of surface quality is one of the most critical processes for manufacturing products such as semiconductor wafers, sapphire substrates, and display panels. The vibrations of the inspection and measurement devices are supposed to be the most dominant factors for severe measurement errors and longer measuring time. In this study, dynamic characteristics of an inspection and measurement device are analyzed through frequency response experiment and computer simulation to obtain parameters such as frequencies, magnitudes, mode shapes, and periods of vibrations. And then an active damper which consists of sensor, interface board, and actuator is designed based on the parameters to formulate the most effective reaction signal to suppress the vibrations which is generated by an interface board, and provided by an actuator. If the vibrations are measured by the sensor, the active damper immediately generates and provides the corresponding reaction signal to inspection and measurement device. The result shows that the active damper can suppress structural vibrations effectively and reduce measuring time of the device and enhance the productivity.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.58-65
• /
• 2021

In this study, as a method to increase the recycling of circulating fluidized bed combustion ash(CFBCA), CFBCA was utilized to produce autoclave aerated concrete product since CFBCA contains quicklime and calcium sulfate components that are required for the manufacture of autoclave aerated concrete. Successful achievement of such objective will bring cost reduction with high value addition, saving of natural resources, and the reduction of environmental load. Various mixing designs were designed to evaluate the properties of autoclave aerated concrete made of CFBCA. Based on series of experimental program, prototypes mix design for factory manufacturing was obtained. According to the experimental results, it was confirmed that gypsum can be replaced with CFBCA through the method of pre-treating the CFBCA as a slurry. It was possible to produce competitive autoclave aerated concrete products using CFBCA.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.2
• /
• pp.222-229
• /
• 2024

As the operating condition for the penetrating missile has been more advanced, the survivability of main charge has been strongly required when the warhead impacts the target. Lots of efforts to desensitize explosives such as the development of insensitive molecular explosives or optimizing plastic-bonded explosives(PBX) systems has been made to enhance the survivability of main charge. However, these efforts face their limits as the weapon system require higher performance. Herein, we suggest a new strategy to secure the survivability of main charge. We applied structurally supportable aluminum honeycomb(HC) structure to cast PBX. The aluminum HC structure reinforces the mechanical strength of cast PBX and helps it to withstand external pressure without the reaction like detonation. In this study, impact resistance character, shock sensitivity and internal blast performance of PBXs reinforced with HC structure were investigated according to the application of aluminum HC structure. The newly suggested aluminum HC structure applied to cast PBX was proved to be a promising manufacturing method available for high-tech weapon systems.

• Journal of Korea Technology Innovation Society
• /
• v.21 no.4
• /
• pp.1366-1385
• /
• 2018

Recently, government policy focuses on R&D subsidies for venture firms in the early and medium stage. However, due to the 'asymmetric information' on those firms, a concern about the possibility of adverse selection of government policy, that is, whether the R&D subsidies are offered to the less-growth potential venture firms is on the rise. Therefore, based on the "2015 venture firm's survey" data in Korea, we compared the managerial efficiency of venture firms in manufacturing sectors by dividing them into beneficiary and non-beneficiary groups at government R&D subsidies. We found that the beneficiary groups showed lower managerial efficiency than non-beneficiary groups, even if they are superior to non-beneficiary groups in technological performance. We also observed that the phenomenon involve 'low managerial efficiency in the beneficiary groups' is more relevant in mid-high tech. manufacturing sectors. Our findings provide an exploratory empirical evidence of the concern about adverse selection in the selection of R&D subsidies beneficiary groups. Therefore, the government should consider managerial performance as the key criteria for selecting R&D subsidies beneficiary groups, rather than depending on technological performance solely. Furthermore, the government should develop other complementary policies to support financial performance of the groups. Lastly, the government should make those policies attract venture firms with potential to achieve financial performance.

• Journal of Industrial Convergence
• /
• v.20 no.10
• /
• pp.87-94
• /
• 2022

This paper seeks to raise inflection points of battery manufacturing bases in Korea in the V4 region through the reorganization of new industrial technologies in accordance with ESG. As a result, the global supply chain market is cut off. The Russian-Ukraine war and the U.S.-China hegemony are competing in the economic crisis caused by COVID-19. It is showing diversification of new suppliers in an environment where mineral, grain procurement, gas, and even wheat imports from China and Russia are not possible. As a protective glocal, this area is used as a buffer zone(Pro-Russia, Hungary). to an isolated zone(anti-Russia, Poland) by war. In this paper, economic growth is expected to slow further due to the EU tapering period and high inflation in world countries. Due to these changes, the conversion of new tech industry and the contraction of Germany's structure due to energy supply may lose the driving force for economic growth over the past 20 years. This is caused by market disconnection(chasm) in the nominal indicators in this area. On the other hand, Korea should actively develop into the V4 area as an energy generation export (nuclear and electric hydrogen generation) area as a bypass development supply area due to the imbalance in the supply chain of rare earth materials that combines AI. By linking this industry, the energy platform can be scaled up and reliable supply technology (next generation BT, recycling technology) in diversification can be formed in countries around the world. This paper proves that in order to overcome the market chasm caused by the industries connection, new energy development and platform size can be achieved and reliable supply technology (next-generation battery and recycling technology, Low-cost LFP) can be diversified in each country.

• Journal of the Korean Institute of Gas
• /
• v.26 no.4
• /
• pp.41-57
• /
• 2022

The global demand for carbon neutrality in response to climate change is in a situation where it is necessary to prepare countermeasures for carbon trade barriers for some countries, including Korea, which is classified as an export-led economic structure and greenhouse gas exporter. Therefore, digital transformation, which is one of the predictable ways for the carbon-neutral transition model to be applied, should be introduced early. By applying digital technology to industrial gas manufacturing facilities used in one of the major industries, high-tech manufacturing industry, and hydrogen gas facilities, which are emerging as eco-friendly energy, abnormal detection, and diagnosis services are provided with cloud-based predictive diagnosis monitoring technology including operating knowledge. Here are the trends. Small and medium-sized companies that are in the blind spot of carbon-neutral implementation by confirming the direction of abnormal diagnosis predictive monitoring through optimization, augmented reality technology, IoT and AI knowledge inference, etc., rather than simply monitoring real-time facility status It can be seen that it is possible to disseminate technologies such as consensus knowledge in the engineering domain and predictive diagnostic monitoring that match the economic feasibility and efficiency of the technology. It is hoped that it will be used as a way to seek countermeasures against carbon emission trade barriers based on the highest level of ICT technology.

• Journal of KIISE:Software and Applications
• /
• v.37 no.12
• /
• pp.909-918
• /
• 2010

To analyze the national competitiveness of Korea leads to the conclusion that global high-tech enterprises have been playing leading and pulling roles in making Korea in line with advanced countries even though the country is lacking in various natural resources. The characteristics of these companies above are as follows; Firstly, these enterprises continue to accumulate core technologies and know-how with highly competent human resources and well-organized management. Secondly, they are well structured and equipped with information technology infrastructures which are, for example, ERP, SCM, CRM, and PLM. Among them PLM is considered to be the principal core information technology infra in manufacturing industry. The urgent task of manufacturing industry recently is to develop new products to accept various needs of consumers, and to launch the products in time to market, which requires the manufactures to be equipped with product development infra and system to upgrade product fulfillment and mass production system in a short period. The introduction of PLM System is a solution of core strategy as a manufacturer for collaboration, global development, reengineering of manufacturing system, the innovation and efficiency of manufacturing process, and product quality improvement. The purpose of this study is to analyze the success factors of introducing PLM System and its practicing effectiveness. And the results of empirical study are as follows; (1) Technical success factors positively impact system quality and user satisfaction, (2) Organizational success factors positively impact system quality, but does not impact user satisfaction, (3) Environmental success factors positively impact system quality and user satisfaction, (4) System quality positively impacts user satisfaction, (5) User satisfaction positively impacts the effectiveness of implementing PLM systems, but system quality does not impact it.

• Journal of the Korean association of regional geographers
• /
• v.1 no.1
• /
• pp.23-43
• /
• 1995

This paper is the first part of a research which looks into the regional development process and the quality of life of Youngnam area, and which suggests a prospect and tasks for the future development of the region. Youngnam region has grown rapidly on the basis of labor-intensive light industries and standardized Fordist lage-scale heavy industries through the industrialization and urbanization of South Korea from the 1960s; but recently it has shown a relatively downward trend. The recent economic stagnation of Youngnam region can be seen as a result of uneven regional development in the national scale, which has brought out the increasing subcontracting relation within the region, the geographically excessive concentration of firms, the lack of growth potentiality of high-tech industries, the weakness of producer service, and the shortage of financial activities for capital flows. In addition, construction of physical and social infrastructures and management of urban central functions could not meet properly the rapid economic and urban growth of the region. Because of these problematics inherent in the economy of Yougnam region, the occupational status of regional dwellers is more or less unstable, and the wage level of employee as a whole in Youngnam region is lower than those of Seoul, although the wage level of labourers in manufacturing is relatively high. Moreover, the quality of life of dwellers in the region has some difficulties in the use of resources and ecological environment as well as the unequal provision of means of living and welfare facilities, even though it has been improved materially.

• The Journal of the Korea Contents Association
• /
• v.13 no.2
• /
• pp.390-399
• /
• 2013

The purpose of this study is to examine the impact of enterprise R&D investment on inter-industry technology spillover in Korea under the new Normal Era. In order to do this, we tested the effect of production inducement, backward and forward linkage effects, and the effect of technology spillover such as technology intensity effects and technology diffusion effects based on an input-output framework. The results show that the high index industries of the production inducement effect were professional, scientific and technical activities, manufacture of metal products, and general machinery. Some manufacturers of other non-metallic mineral products and transport equipment sectors appeared to have the strong effect of forward and backward linkages that were almost equivalent to high-tech manufacturing industries. In particular, the industries of professional, scientific and technical activities appeared to have the strong effect of both forward and backward linkages. Therefore, we need to drive a strong policy support to higher enterprise R&D investment in the those particular industries not only to increase global competitiveness, but also to widen up the technology spillover effect on other industries.

• Korean Journal of Food Science and Technology
• /
• v.54 no.3
• /
• pp.264-271
• /
• 2022

In this study, the nutritional properties of sterilized and non-heat-pressed raw perilla oil (SRPO) were studied and its potential as a functional food was evaluated. The copper, cobalt, and calcium levels were high in sterilized and SRPO. The total polyphenol content and ABTS radical scavenging activity were the highest in SRPO, whereas nitrite scavenging activity was the highest in 45℃ cold pressed perilla oil (CPPO). The above results confirmed that sterilized and non-heat-pressed perilla oil had high mineral and total polyphenol contents, as well as ABTS radical scavenging activity and nitrite scavenging ability. The peroxide value of SRPO decreased as the storage period increased, and the acid value of low-temperature pressed perilla oil over 65℃ (LPPO) significantly increased. This work also provided an opportunity to develop a new method for manufacturing perilla oil, and it is hoped that these experiments will form a basis for the commercialization of perilla oil.