• Journal of the Korean Chemical Society
• /
• v.36 no.5
• /
• pp.697-708
• /
• 1992

Liquid Chromatographic behavior of Ni(II) in Isonitrosoethylacetoacetate Imine(IEAA-NR), Ni(IEAA-NH)(IEAA-NR)(R = H, CH_3, C-2H_5, n-C_4H_9, C_6H_5-CH_2) chelates were investigated by reversed-phase HPLC on Micropak MCH-5 column using methanol/water as mobile phase. The optimum conditions for the separation of Ni(IEAA-NH)(IEAA-NR) chelates were examined with respect to the effect of the flow rate, sample solvent, mobile phase strength and column temperature. It was fo$und that metal chelates were properly eluted in an acceptable range of capacity factor value(0{\le}logk'{\le}1). The dependence of the logarithm of capacity factor (k') on the volume fraction of water in the binary mobile phase as well as on the liquid-liquid extraction distribution ratio (Dc) in methanol-water/n-alkane extraction system showed the good linearties, and the dependence of the logarithm of capacity factor (k') on the column temperature and on the enthalpy exhibited the good linearties, and the compensation temperature ({\beta}) from the slope was 773.47{\circ}K. It was suggested that the retention of metal chelates was largely affected by the hydrophobic effect.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.3
• /
• pp.319-332
• /
• 2004

Due to their high strength to weight ratios and excellent durability, fiber reinforced polymer(FRP) is widely used in construction industries. In this paper, a shape optimum design of FRP bridge decks haying pultruded cellular cross-section is presented. In the problem formulation, an objective function is selected to minimize the volumes. The cross-sectional dimensions and material properties of the deck of FRP bridges are used as the design variables. On the other hand, deflection limits in the design code, material failure criteria, buckling load, minimum height, and stress are selected as the design constraints to enhance the structural performance of FRP decks. In order to efficiently treat the optimization process, the cross-sectional shape of bridge decks is assumed to be a tube shape. The optimization process utilizes an improved Genetic Algorithms incorporating indexing technique. For the structural analysis using a three-dimensional finite element, a commercial package(ABAQUS) is used. Using a computer program coded for this study, an example problem is solved and the results are presented with sensitivity analysis. The bridge consists of a deck width of 12.14m and is supported by five 40m long steel girders spaced at 2.5m. The bridge is designed to carry a standard DB-24 truck loading according to the Standard Specifications for Highway Bridges in Korea. Based on the optimum design, viable cross-sectional dimensions for FRP decks, suitable for pultrusion process are proposed.

• Horticultural Science & Technology
• /
• v.30 no.5
• /
• pp.579-585
• /
• 2012

This study was carried out to investigate the effect of potassium silicate on the growth and leaf epidermal characteristics of horticultural crops viz., begonia (Begonia semperflorens Link et Otto) 'Super Olympia Red' and 'Super Olympia Rose' and pansy (Viola ${\times}$ wittrockiana Hort.) 'Matrix White Blotch' and 'Matrix Yellow Blotch' in vitro. Seeds after germination were grown on a quarter strength MS medium supplemented with potassium silicate ($K_2SiO_3$) at 0, 100, 200, or $300mg{\cdot}L^{-1}$ and were maintained under a photoperiod of 16 hours at $25^{\circ}C$. Growth parameters such as plant height, root length, chlorophyll content, fresh, and dry weights have been recorded after a growth period of 58 days for begonia and 94 days for pansy. In begonia, fresh weight was significantly greatest in the $200mg{\cdot}L^{-1}$ $K_2SiO_3$ treatment in both 'Super Olympia Red' and 'Super Olympia Rose'. In both pansy cultivars, fresh weight was the greatest in the $200mg{\cdot}L^{-1}$ $K_2SiO_3$ treatment than other treatments. Chlorophyll content was significantly greater in the $100mg{\cdot}L^{-1}$ $K_2SiO_3$ treatment for both the cultivars of begonia. Leaf area significantly increased with the higher concentrations of $K_2SiO_3$ treatment in both cultivars of pansy. Stomatal structures on the leaf epidermis were observed with scanning electron microscopy (SEM). In begonia 'Super Olympia Rose', the structure of stomata were more compact in size in the $300mg{\cdot}L^{-1}$ $K_2SiO_3$ treatment than in the control. Similarly, in pansy 'Matrix White Blotch' the surface of stomata appeared to be smoother in the $300mg{\cdot}L^{-1}$ $K_2SiO_3$ treatment than those wrinkled appearance in the control. The surface of the leaf epidermis appeared to be compact due to Si deposition, and thus results indicated that Si positively affected the growth and biomass production of these species. Our data show that the effect of Si on growth parameters is strongly dependent on cultivar of the plant species tested.

• Applied Chemistry for Engineering
• /
• v.31 no.3
• /
• pp.310-316
• /
• 2020

Terpene-modified phenolic resins were used to improve the tires wet traction related to the driving safety and also rolling resistance related to fuel efficiency. In this work, alpha-pinene, beta pinene, and delta limonene resins, which constitute different basic structures of terpene-modified phenolic resins, were individually added to the tread compounds of tires and their physical properties were compared with those of the alkyl phenol resin compounds. Alkyl phenolic resins showed no significant difference in tangent delta from terpene-modified phenolic resins at 0 ℃, which is related to wet traction, but showed higher tangent delta at 80 ℃, which is related to rolling resistance, indicating smaller fuel efficiency improvement effects. Among the terpene-modified phenolic resins, beta pinene one showed improved wet traction and fuel efficiency compared to those of other resins. Delta limonene resin showed the best wet traction improvement effect, and alkyl phenolic resins showed relatively high tensile strength and abrasion property. All terpene-modified resins exhibited better rolling resistance than those of alkyl phenolic ones so that they can be said to have better fuel efficiency improvement effects and also to improve other properties compared to those of blanks. Terpene-modified phenolic resins could be used when mixing tire compounds referring to the properties of the phenolic resins revealed in this work, which could result in preparing compounds with improved wet traction and rolling resistance.

• Journal of Animal Environmental Science
• /
• v.15 no.3
• /
• pp.199-208
• /
• 2009

This study was conducted to investigate the effects of dietary silicate minerals on ammonia emission from the excreta and performance in laying hens. A total of one thousand and twenty 49 week-old Lohmann brown layers were divided into three treatment groups consisting two replicates of 170 birds each. The experimental diets were containing three kinds of silicate minerals (Sand, Na-bentonite and SY feldspar) added at the level of 2% by top-dressing. Ammonia emission from the excreta was significantly decreased (p<0.05) by the supplementation of Na-bentonite or SY feldspar. N concentration of the excreta was significantly higher (p<0.05) for the hens fed Na-bentonite or SY feldspar compared to those fed sand. However, no significant differences were observed in feed intake and laying performance with over 80% laying rate observed for all the treatments. Egg shell strength was diminished when SY feldspar was added to the diet. As a whole, the results obtained from the experiment indicated that supplementation of Na-bentonite or SY feldspar added at 2% to the laying hen diet should not affect laying performance but help to reduce ammonia from the excreta at the same time.

• The Journal of Engineering Geology
• /
• v.14 no.4 s.41
• /
• pp.487-498
• /
• 2004

There is an increasing trend of construction works in mountainous areas by the urban development in Busan that is mainly composed of mountains. The study area, Hwangryeong Mt., is one of developing sites in the urban area, too. Landslides and cut-slope failures that occur large damages of human beings and the properties are influenced by soil characteristics as well as rock properties. This study analyzed geotechnical characteristics of soil dependent on geology at Hwangryeong Mt. where a large slope failure had been occurred in 1999. Geology of the study area is composed of the Cretaceous sedimentary rocks and volcanic rocks. Soil layer of the slopes can be grouped into sand mixed with clay and silt. The cohesion is plotted between $0.001\;and\;0.066kg/cm^2$. The friction angles are distributed in the ranges between $32^{\circ}\;and\;39^{\circ}$, meaning soil bearing a high friction angle. The permeability coefficients are plotted between $2.34\times10^{-4}cm/sec\;and\;2.58\times10^{-2}cm/sec$, indicating fine sand and loose silt with a medium grade of permeability. The sedimentary rocks area shows relatively higher permeability coefficients than those volcanic rocks area.

• Korean Journal of Poultry Science
• /
• v.37 no.2
• /
• pp.151-158
• /
• 2010

TCM-KWG (tissue culture medium waste after harvest of Korean wild ginseng) (panax ginseng) is left over of tissue culture medium used to grow Korean wild ginseng (KWG). The present study was conducted to investigate the effect of TCM-KWG on meat quality and the possible of application as additives in broiler chickens. A day old broiler chickens randomized in 6 groups (n=60/groups) were administered orally with 2, 4, 8, 16, 32 mL/L TCM-KWG through drinking water with one untreated control group. After administration for five weeks, we analyzed chemical composition and meat quality. Crude ash increased approximately 20% in TCM-KWG treatment groups as compared to control group whereas the concentration of moisture, crude protein and crude fat did not show any significant difference. Crude ash is essential to enhance skeleton formation and physiological function. TCM-KWG treatment gradually decreased the pH value of breast meat whereas it did not change the purge loss and cooking loss. The pH value of meat is important for preservation of meat for longer periods and high durability strength. These results suggest that TCM-KWG treatment may improve the quality of meat and can be apply as food additives in chickens.

• Toxicological Research
• /
• v.23 no.4
• /
• pp.331-339
• /
• 2007

Titanium or titanium alloy is a widely used implant material according to its certified biocompatibility, sufficient strength and ready availability. The purpose of this study was to evaluate the relative biocompatibility of titanium and titanium alloy specimens (Ti-29Nb-13Ta, TiNb and Ti-6Al-4V, Ti64) using in vivo and in vitro methods. For in vivo experiment, the specimens were implanted in the abdominal subcutaneous region of female mice for 2 and 4 weeks. The reaction of connective tissue to specimens was evaluated histologically. The specimens were encapsulated by fibrous connective tissue consisting of fibroblast, fibrocyte and other cells including neutrophil, macrophage, giant multinucleated cell and unidentified cells. Some newly formed blood vessels were located in the fibrous capsule surrounding the implant. Cell types and the thickness of fibrous capsules were examined quantitatively. Most of cell types located in the fibrous capsule were fibroblasts and fibrocytes. The average thickness of fibrous capsules for the TiNb specimens was much thinner than that of the titanium alloy, Ti64. The thickness of the fibrous capsule around all titanium specimens decreased at 4 weeks compared to 2 weeks post-implantation. The biocompatibility of titanium and titanium alloy specimens were also investigated in in vitro method using alkaline phosphatase from MG-63 cells. Alkaline phosphatase activity of the TiNb specimen showed higher activity than the titanium alloy, Ti64. In conclusion, the TiNb alloy with thin capsule thickness in vivo and high alkaline phosphatase activity in vitro will be of considerable use in biomedical applications.

• Journal of environmental and Sanitary engineering
• /
• v.19 no.4 s.54
• /
• pp.9-18
• /
• 2004

In this study, the observation data for the yellow sandy dust phenomena from the year 1999 to 2003 at background sites in Korea were collected at Global Atmospheric Observatory at An-Myeon island and its temporal variation were analyzed. The chemical characteristics of the fine particles were also analyzed in order to evaluate sources of the yellow sandy dust particles. The results showed that the monthly average mass concentration of the fine particles was the highest in springtime and the lowest in summertime in general. The magnitude of its variation was also the highest in March in which the occurrence of yellow sandy dust was the most frequent and thus the number of samples was the largest, while the lowest in June through September. The yearly variation of ion components contributions to the total mass concentration of the fine particles was slowly decreasing, showing that $63\%$ in 1999, $59\%$ in 2000 and $56\%$ in 2003. The most prevalent ion components in the fine particles were found to be $NO_3$ and $SO_4^{2-}$, which are known to be source materials of acidic precipitation, and $NH_4^+$, a neutralizing material of the acid precipitation. Relative proportion of metal components in the fine particles was calculated as $14\%$ in average, and their concentrations are in an order of Fe > Al > Na > Ca > Zn > Pb > Cu > Mn > Ni > Cd > Cr > Co > U. The results indicated that main sources of the metals was soil-originated Fe, Al, Ca, and Mg, and the contribution of anthropogenic air Pollution-originated Zn, Pb, Cu, Mn were also high and keep slightly increasing. Statistical analysis showed that the chemical components could be divided into soil-originated group of Mg, Al, Ca, Fe, and Mn and air pollution-originated group of $NO_3$, Zn, Pb, and they are occupying more than $60\%$of all the components in the dusty sand. The results explain that An-Myeon island is more influenced by soil-originated source than ocean-originated one and also the influencing strength of anthropogenic poilution-originated source is less than $50\%$ of that of soil-originated sources. Compared to non-yellow sandy period, the yellow sandy dust period showed that the amounts of soil-originated $Mg^{2+}$ and $Ca^{2+}$ and ocean-originated $Na^+$ and $Cl^-$ were increased to more than double and the metals of Mg, Al, Ca, Fe were also highly increased, while micro metal components such as Pb, Cd, Zn, which have a tendency of concentrating in air, were either decreased or maintained at nearly constant level. In the period of yellow sandy dust, a strong positive correlation was observed between water soluble ions and between metals in terms of its concentration, respectively. Factor analysis showed that the first group being comprised of about $43\%$ of the total inorganic components was affected by soil and they are ions of $Na^+,\;Mg^{2+}\;and\;Ca^{2+}$ and metals of Na, Fe, Mn and Ni. The result also showed that the metals of Mg and Cr were classified as second group and they were also highly affected by soil sources.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.3 s.32
• /
• pp.363-375
• /
• 1997

This study encompasses the performance of static and fatigue test for the 8 large scale test specimens to clarify the fatigue behavior of coped stringer and the effect of the repair and strengthening on the damaged stringer of the floor system in steel railway bridges. For the purpose of the research, the actual stress wave for the existing bridge was measured, the basic stress range frequency histogram was made and the equivalent stress range was calculated. Using the result from the equivalent stress range made by adjusting the stress range, the static and fatigue test was carried out by identifying the previous rehabilitation and after. As the result of the static tests, it was revealed that the level of local stress under the S1 specimen test of the real equivalent stress range was similar to tensile strength of the test material, and it was consistent with the requirement of the initiation condition of the fatigue crack. Through the various rehabilitation methods to the damaged specimens, the effects of the repair and reinforcement were analyzed. According to the results of the repair of effect, bolting the high tension bolt over the stop hole was confirmed to be more adequate method than drilling only stop hole to delay the fatigue crack growth. Futhermore, in case of the stringer subjected by bending moment, the reinforcement over the upper flange side was determined to be a useful strengthening method, and the reinforcement to the web of the stringer was not appropriate to accomodate as a adequate strengthening method. Also it was confirmed that the category of the fatigue design for the coped stringer met with the category E specified on the fatigue design criteria of the Highway Standard Specification in Korea.