• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.194-197
• /
• 1998

Image Processing은 Image Data가 대량이고 내재된 정보가 병렬로 연관성을 가진다는 측면에서 실시간 처리가 용이하지 알다. 본 연구에서는 High Speed Real Time Image Processing을 위한 IPU(Image Processing Unit)와 이를 구동하기 위한 High Speed Real Time image Processing Language인 IPASM(Image Processing Assembly)을 제안한다. 우선 IPU의 기본개념을 설명하고 IPU의 구현을 위한 IPLU(Image Processing Logic Unit)를 설계한다. 그 후 Window98환경에서 구동 가능한 IPASM Interpreter를 실제로 제작하여 IPU의 동작방식을 간접적으로 진단한다.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.835-836
• /
• 2006

For non-contact structure vibration displacement measurement system, an algorithm for image processing using high speed CCD camera is introduced. The system sets the target to the structure, take picture using camera and image processing is performed to display the vibration data. The algorithm flow is basic preprocessing, projection data generation and curve fitting to find three crossing points for calibration or one center point in limited area.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.537-539
• /
• 2007

Telemetry processing system requires minimum bit transition level in data streams to maintain a bit synchronization while receiving telemetry signal. PN code has a capability of providing the bit transition and is widely used in the packet communication of CCSDS. CCSDS PN code that generator polynomial is $h(x)=x^{8}+x^{7}+x^{5}+x^{3}+1$, and the random bit sequence that is generated from this polynomial is repeated with the cycle of 255 bits. As the resolution of satellite image increases, the size and transmission rate of data increases. To process of huge and bulky size of satellite image, the speed of CCSDS PN Processing is very important. This paper introduces the way of improving the CCSDS PN Processing speed through processing 128 bits at one time using the feature of cyclic structure that repeats after first 255 bytes by grouping the random bit sequence with 1 byte and Intel Streaming SIMD Extensions 2. And this paper includes the comparison data of processing speed between SSE2-applied implementation and not-applied implementation, in addition, the measured value of speed improvement.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.5
• /
• pp.13-19
• /
• 2011

In this paper, the active monitoring and control system is developed. This system can monitor the status of high the speed spindle in real time during its processing, and can analyze its influence of dimensional accuracy and processing if any, and can control the machining condition to realize the machining system equipped with active monitoring and self-diagnostic features. Machining experiment was performed on 3 materials Al, Brass and S45C in order to derive the relation between active monitoring and control algorithm by the machining load. In addition, we measured surface roughness of processing specimen along with the data change of spindle rotating speed and conveying speed according to variation of machining load. Based on these experiments, we derived relations for each material that can be applied to the control algorithm to allow self control of the rotating speed and conveying speed according to the machining load.

• Current Industrial and Technological Trends in Aerospace
• /
• v.8 no.2
• /
• pp.15-23
• /
• 2010

In this paper, the trends of a satellite offline telemetry processing system had been discussed. The satellite offline telemetry processing system is used to analyze an offline telemetry and to check health status of the satellite. Common requirements for the system are high speed processing, processed data visualization, easiness of use, and generality. Regarding to these requirements, how the recent telemetry processing system had been designed and implemented is discussed in detail.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.2
• /
• pp.59-65
• /
• 2011

All-optical signal processing is expected to offer advantages in speed and power consumption against over electronics signal processing. It has a potential to solve the bottleneck issues of ultra-high speed communication network nodes. All-optical serial-to-parallel and parallel-to-serial data converters would make it possible to easily process the serial data information of a high-speed optical packet without optical-to-electronic-to-optical data conversion. In this paper, we explain the principle of simple and easily expandable all-optical serial-to-parallel and parallel-to-serial data converters based on Mach-Zehnder interferometers. We experimentally demonstrate these data converters at 10Gbit/s serial data rate. They are useful all-optical devices for the all-optical implementations of label decoding, self-routing, control of variable packets, bit-wise logical operation, and data format conversion.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.118.5-118
• /
• 2001

This paper describes an image processing method for inspecting the surface outlook of high speed moving plates. Noise free image and a new real time processing methods are required to inspect the surface outlook of the high speed moving plates in real time. It is difficult to get a noise free image due to a signal noise, a light noise and background image in typical industrial factory. Thus, pre-processing techniques should be required to get a good image and produce so many time steps to proceed the image data. The objective of this research is to get image on the surface of the moving plates with a speed of 1m/sec and to detect some defaults on the surface image. So, the pre-processing techniques ...

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.3 s.35
• /
• pp.183-188
• /
• 2005

Parallel processing in block cryptographic algorithm is difficult, because Feistel structure that is basis structure of block cryptographic algorithm is sequential processing structure. Therefore this paper changes these sequential processing structure and Feistel structure made parallel processing to be possible. This paper that apply this modified structure designed DES that have parallel Feistel structure. Proposed parallel Feistel structure could prove greatly block cryptographic algorithm's performance such as DES and so on that could not but have trade-off relation the data processing speed and data security interval because block cryptographic algorithm can not use pipeline method because of itself structural problem. Therefore, modified Feistel structure is going to display more superior security function and processing ability of high speed than now in case apply way that is proposed to SEED, AES's Rijndael, Twofish etc. that apply Feistel structure.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11S
• /
• pp.3190-3198
• /
• 1999

Because of the rapid growth of the mobile communication, the need for the mobile internet access has grown up as well. since the current mobile communication network, however, is optimized for a voice communication system, which exclusively occupies a channel for a given time, it is not suitable for variable rate packet data. In order to support the mobile internet access, it is essential do design a reasonable packet switching network which supports the mobility. Since mobile packet network has longer latency, high speed switching and QoS are required to meet the user's requirements. In this paper, we suggest an resonable way to construct a network and its operation procedures utilizing GPRS(General Packet Radio Service) network and MPLS(Multi Protocol Label Switching) to provide a high speed switching and QoS mobile internet access. GPRS is used as a network which supports the mobility and MPLS guarantees the QoS and high speed IP protocol transmission based on the ATM switching technology.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.709-711
• /
• 2005

Developing fault location system for underground power cable which can detect its fault location exactly require very high speed data acquisition and signal processing capability. We are developing fault location system which is different from conventional fault locator. This fault location system monitor underground power cable by using on-line speed current sensor and if there are an accident, it record its transient signal and calculate fault location by analyzing it. Signals which acquired when power cable fault arise, showed transient characteristics and its frequency band is very hish. So, to develop fault location system, we designed special high speed data acquisition and signal processing board. In this thesis, we describe on data acquisition and signal processing H/W design for fault location system on underground power cable.