• Journal of Korean Society for Quality Management
• /
• v.46 no.3
• /
• pp.539-550
• /
• 2018

Purpose: The purpose of this study was to find meaningful patient groups of disease using foreign patients data and analyze implemented test of the patient groups. Methods: The data was collected by foreign patients' EMR data of K university hospital. The author proposed tree-form patients' characteristic diagram through statistical methods that association rule, proportion test, clustering using prescription information and questionnaire information. Results: This study's analysis process was applied high blood data and diabetes data. Analysis showed other characteristic of meaningful patient groups in high blood and diabetes. In high blood, test implementation rate of patient group showed the differences. And in diabetes, test implementation rate of patient group and implemented test list showed differences. Conclusion: The result of this study can play a role as basic data that can be clinical testing standard in preventive aspect. Eventually, 5 dimensions of SERVQUAL will be improved by this study's process.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.2
• /
• pp.42-49
• /
• 1998

By checking the variations of the raw water quality and MLSS, the effects of the membrane materials on permeable flux and quality of the treated water were investigated in this study. Due to the stability for high variations of MLSS, tubular type membranes were selected. Polysulfone group membranes and polyamide group membranes were tested. The crossflow operation mode was adapted, because membrane fouling problems could be easily controlled by adjusting the linear velocity. Due to the high concentration of the raw water, polyamide group membranes were originally expected to achieve two times higher permeable fluxes. However, difference was only approximately $20l/m^2{\cdot}h$ at $3kgf/cm^2$. It might be resulted from the high concentration of organic materials in the effluent of the RBC process. For the quality of the treated water, polyamide group membranes were slightly less effective. It might be resulted from the fact that polysulfone group membranes had more adsorptive capacities for the organic materials. The effects of temperature on the permeable flux were found to be significant. Despite of the irregular injection of raw water, the quality of the treated water was kept stable.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.4
• /
• pp.160-167
• /
• 2007

In this paper, we presented the development results of high speed wavefront sensor which is used in diagnosing the beam quality of He-Ne laser for adaptive optics system. The beam quality information of laser in AO system is necessarily required for diagnosing the optical components or correcting the distorted wavefront afterward. According to system requirements, normally, it is requested that there are high precision of measurement and real time processing speed. The developed wavefront sensor in this paper achieved maximum 30Hz of measurement rate and ${\lambda}/20(\;{@}\;{\lambda}=0.6328{\mu}m)$ of measurement precision in RMS. We also applied the developed into an experimental adaptive system and verified the performance of it by correcting the aberrated wavefront with a rate of 30Hz and $\lambda$/20 precision using the combination of the developed and PID control algorithm.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.2
• /
• pp.346-356
• /
• 1997

This study explored the attributes of the fashion specialty store according to the level of fashion involvement. Data were obtained from 262 female college student. For analysis of the data, conjoint analysis, T-test, factor analysis were employed. The results of this study were as follows; 1) Fashion involvement could be used as an importants segment variable and that attitude toward store attributes differed by the level of fashion involvement. 2) The high fashion involvement group preferred a downtown area in location, high fashion in fashionability and fashion couture quality in terms of product quality. On the other hand, the low involvement group preferred a residential area in location, basic staple goods in fashionability, and easy to care clothes in terms of product quality. 3) Five store attributes were grouped into two attribute groups: merchandising function (including product quality, assortment and fashionability) and store atmospheric function (including location and atmosphere). The results showed that the high fashion involvement group placed more importance on the store atmospheric function rather than the merchadising function. For the low fashion involvement group, the importance was reversed.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.4
• /
• pp.331-345
• /
• 2001

The increase of carbon monoxide in the ambient air due to the emissions from point sources without control was estimated using three -dimensional numerical models. The target area was Ulsan where one of the largest industrial complexes was located. As a typical example using numerical models for air quality impact analysis of criteria pollutants that will determine whether the air quality standards would be exceeded or not, the following approaches were suggested. They include: (1) investigation of pre-existing atmospheric conditions, (2) identification of major factors causing high concentrations, (3) selection of episode days. (4) preparation of three-dimensional meteorological data, (5) confirmation of agreement between measured and predicted concentrations in the emission conditions of episode days, and (6) estimation of the impact due to changes of the emission conditions. In the present work, daily meteorological conditions for the specific period were classified into four clusters of distinctive features, and the episode days were selected individually from each cluster. Emphasis was placed on the selection of episodes representing meteorological conditions conducive to high concentrations especially for point sources that were sensitive to the wind direction variations.

• Journal of Environmental Impact Assessment
• /
• v.12 no.5
• /
• pp.341-348
• /
• 2003

Seasonal characteristics of water quality and effect of the freshwater discharge during open the tide embankment in Haechang Bay were evaluated. In the freshwater, where interior of the tide embankment, COD and Chl-a exceeded about 4mg/L and $10mg/m^3$, respectively, independent of season, while in the seawater they showed high values in April and July in contrast to the other period due to input of freshwater and increase of phytoplankton, respectively. The content of seawater inorganic nitrogen maintained a relatively high level at inner part of the bay, whereas high values of inorganic phosphorus content was distributed at all over the bay. The limiting factor for algal growth was nitrogen with respect to the N/P ratio. The compass of influence by the freshwater discharge in April was quite different with water pollutants. As a result of the salinity variation with time, the freshwater extended strongly to offshore from the surface layer without mixing with depth when open the tide embankment, and reached within about one hour at a station which is 3.5km from the tide embankment. To effective water quality management of Haechang Bay, discharge rate and pollutant loads should be controlled.

• Journal of Sasang Constitutional Medicine
• /
• v.16 no.1
• /
• pp.53-60
• /
• 2004

Purpose This study is to find the characteristics of voice quality based on the classifying the sound characteristics and B.M.I. by Sasang Constitution. Methods To make the notion of the consensus of Sasang Constitution's Voice, classification into 4 categories was made: clear/hoarse, high/low, powerful/powerless, fast/slow. Result The voice quality of Soyangin group was classified as powerful and fast, and that of Taeumin group was classified as powerful and hoarse and low, and that of Soeumin group was classified as powerless and clear. The mean B.M.I. of Soeumin group was classified as 21.4, and that of Taeumin group was classified as 26.3. Conclusion 1. Taeumin was significantly high compared with Soeumin in B.M.I. 2. It can be classified as Taeumin when B.M.I. is high(26.3). 3. It can be classified as Soeumin when B.M.I. is low(21.4). 4. The voice quality of Soyangin group was classified as clear and fast, or strong and clear, and that of Taeumin group as powerful and hoarse, and that of Soeumin group as powerless and low.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.04a
• /
• pp.327-338
• /
• 2011

This study was carried in order to manufacture the high quality coated paper. High quality includes not only properties of coated paper but also final print quality. In this study, new acrylic-styrene emulsion was polymerized in laboratory and compared with styrene-butadiene latex. Low-shear viscosity of coating color was decreased with increasing acrylic-emulsion dosage. WRV was increased with addition and decreased with substitution of acrylic-emulsion. Paper gloss, brightness and whiteness were increased and PPS and opacity was slightly decreased with acrylic-emulsion. Ink gloss was increased with using No. 3 acrylic-emulsion due to lower ink setting properties. However No.1, 2 emulsion shows opposite situation. Surface strength of coated paper was increased with using No. 3 acrylic-emulsion These results indicate that high quality coated paper can be manufactured with using No. 3 acrylic-emulsion.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1364-1366
• /
• 1998

An active-matrix LCD using thin film transistors (TFT) has been widely recognized as having potential for high-quality color flat-panel displays. Pixel-Design Array Simulation Tool (PDAST) was used to profoundly understand the gate signal distortion and pixel charging capability, which are the most critical limiting factors for high-quality TFT-LCDs. Since PDAST can simulate the gate, data and pixel voltages of a certain pixel on TFT array at any time and at any location on an array, the effect of the resistivity of gate line material on the pixel operations can be effectively analyzed. The gate signal delay. pixel charging ratio, level-shift of the pixel voltage were simulated with varying the parameters. The information obtained from this study could be utilized to design the larger area and finer image quality panel.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.5
• /
• pp.805-816
• /
• 2014

We investigated the quality characteristics and resulting sensory evaluation of semi-dried silver pomfret treated with high hydrostatic pressure (HHP) processing and brining for 14 days at 4 and $10^{\circ}C$ to evaluate the effects of treatment with HHP processing. HHP treatment and brining could cause compaction of fibers and the space between muscle. The G' values of all samples were higher than the G" values and the tan ${\delta}$ values of the tissue ranged from 0.222 to 0.251 with no further changes observed during storage. HHP treatment and brining significantly increased the total color difference, and the HHP and brine-treated group scored significantly higher than the others in terms of sensory evaluation. HHP treatment combined with brining could have a significant effect on the quality characteristics of the semi-dried products and their storage stability, and it is suggested from the results that they may have the potential to satisfy the requirements to produce commercially marketable food grade products.